#include <linux/pci_ids.h>
#include <linux/resource.h>
#include <linux/unistd.h>
+#include <linux/console.h>
#include <asm/io.h>
#include <asm/div64.h>
-
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
-
#include <asm/page.h>
#include "i810_regs.h"
#include "i810.h"
#include "i810_main.h"
+/*
+ * voffset - framebuffer offset in MiB from aperture start address. In order for
+ * the driver to work with X, we must try to use memory holes left untouched by X. The
+ * following table lists where X's different surfaces start at.
+ *
+ * ---------------------------------------------
+ * : : 64 MiB : 32 MiB :
+ * ----------------------------------------------
+ * : FrontBuffer : 0 : 0 :
+ * : DepthBuffer : 48 : 16 :
+ * : BackBuffer : 56 : 24 :
+ * ----------------------------------------------
+ *
+ * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
+ * 15 + 1 MiB of Framebuffer memory. For 32 MiB Aperture sizes, a v_offset of 8 MiB should
+ * work, allowing 7 + 1 MiB of Framebuffer memory.
+ * Note, the size of the hole may change depending on how much memory you allocate to X,
+ * and how the memory is split up between these surfaces.
+ *
+ * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
+ * DRI disabled. But if the Frontbuffer is overlapped, X will fail to load.
+ *
+ * Experiment with v_offset to find out which works best for you.
+ */
+static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset __initdata = 0;
+
+static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
+static int __devinit i810fb_init_pci (struct pci_dev *dev,
+ const struct pci_device_id *entry);
+static void __exit i810fb_remove_pci(struct pci_dev *dev);
+static int i810fb_resume(struct pci_dev *dev);
+static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
+
+/* Chipset Specific Functions */
+static int i810fb_set_par (struct fb_info *info);
+static int i810fb_getcolreg (u8 regno, u8 *red, u8 *green, u8 *blue,
+ u8 *transp, struct fb_info *info);
+static int i810fb_setcolreg (unsigned regno, unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info);
+static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
+static int i810fb_blank (int blank_mode, struct fb_info *info);
+
+/* Initialization */
+static void i810fb_release_resource (struct fb_info *info, struct i810fb_par *par);
+
/* PCI */
static const char *i810_pci_list[] __devinitdata = {
"Intel(R) 810 Framebuffer Device" ,
static int sync __devinitdata;
static int extvga __devinitdata;
static int dcolor __devinitdata;
+static int ddc3 __devinitdata = 2;
/*------------------------------------------------------------*/
static void i810_load_cursor_colors(int fg, int bg, struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
u8 red, green, blue, trans, temp;
static int i810_check_params(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
int line_length, vidmem, mode_valid = 0, retval = 0;
u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
/*
*/
static int encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
static int i810fb_getcolreg(u8 regno, u8 *red, u8 *green, u8 *blue,
u8 *transp, struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
u8 temp;
static int i810fb_open(struct fb_info *info, int user)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u32 count = atomic_read(&par->use_count);
if (count == 0) {
static int i810fb_release(struct fb_info *info, int user)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u32 count;
count = atomic_read(&par->use_count);
unsigned blue, unsigned transp,
struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
u8 temp;
int i;
static int i810fb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u32 total;
total = var->xoffset * par->depth +
static int i810fb_blank (int blank_mode, struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
int mode = 0, pwr, scr_off = 0;
static int i810fb_set_par(struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
decode_var(&info->var, par);
i810_load_regs(par);
static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
- struct i810fb_par *par = (struct i810fb_par *)info->par;
+ struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
if (!par->dev_flags & LOCKUP)
static int i810fb_suspend(struct pci_dev *dev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(dev);
- struct i810fb_par *par = (struct i810fb_par *) info->par;
- int blank = 0, prev_state = par->cur_state;
-
- if (state.event == prev_state)
- return 0;
+ struct i810fb_par *par = info->par;
par->cur_state = state.event;
- switch (state.event) {
- case 1:
- blank = VESA_VSYNC_SUSPEND;
- break;
- case 2:
- blank = VESA_HSYNC_SUSPEND;
- break;
- case 3:
- blank = VESA_POWERDOWN;
- break;
- default:
- return -EINVAL;
+ if (state.event == PM_EVENT_FREEZE) {
+ dev->dev.power.power_state = state;
+ return 0;
}
- info->fbops->fb_blank(blank, info);
- if (!prev_state) {
- agp_unbind_memory(par->i810_gtt.i810_fb_memory);
- agp_unbind_memory(par->i810_gtt.i810_cursor_memory);
- pci_disable_device(dev);
- }
+ acquire_console_sem();
+ fb_set_suspend(info, 1);
+
+ if (info->fbops->fb_sync)
+ info->fbops->fb_sync(info);
+
+ i810fb_blank(FB_BLANK_POWERDOWN, info);
+ agp_unbind_memory(par->i810_gtt.i810_fb_memory);
+ agp_unbind_memory(par->i810_gtt.i810_cursor_memory);
+
pci_save_state(dev);
+ pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
+ release_console_sem();
return 0;
}
static int i810fb_resume(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
+ int cur_state = par->cur_state;
+
+ par->cur_state = PM_EVENT_ON;
- if (par->cur_state == 0)
+ if (cur_state == PM_EVENT_FREEZE) {
+ pci_set_power_state(dev, PCI_D0);
return 0;
+ }
- pci_restore_state(dev);
+ acquire_console_sem();
pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
pci_enable_device(dev);
+ pci_set_master(dev);
agp_bind_memory(par->i810_gtt.i810_fb_memory,
par->fb.offset);
agp_bind_memory(par->i810_gtt.i810_cursor_memory,
par->cursor_heap.offset);
-
+ i810fb_set_par(info);
+ fb_set_suspend (info, 0);
info->fbops->fb_blank(VESA_NO_BLANKING, info);
-
- par->cur_state = 0;
-
+ release_console_sem();
return 0;
}
/***********************************************************************
static int __devinit i810_alloc_agp_mem(struct fb_info *info)
{
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
int size;
struct agp_bridge_data *bridge;
if (sync)
par->dev_flags |= ALWAYS_SYNC;
+ par->ddc_num = ddc3;
+
if (bpp < 8)
bpp = 8;
int found = 0;
#ifdef CONFIG_FB_I810_I2C
int i;
- int err;
+ int err = 1;
struct i810fb_par *par = info->par;
#endif
#ifdef CONFIG_FB_I810_I2C
i810_create_i2c_busses(par);
- for (i = 0; i < 3; i++) {
- err = i810_probe_i2c_connector(info, &par->edid, i+1);
+ for (i = 0; i < par->ddc_num + 1; i++) {
+ err = i810_probe_i2c_connector(info, &par->edid, i);
if (!err)
break;
}
fb_videomode_to_modelist(specs->modedb, specs->modedb_len,
&info->modelist);
if (specs->modedb != NULL) {
- if (xres && yres) {
- struct fb_videomode *m;
+ struct fb_videomode *m;
+ if (xres && yres) {
if ((m = fb_find_best_mode(&var, &info->modelist))) {
mode = *m;
found = 1;
}
}
- if (!found && specs->misc & FB_MISC_1ST_DETAIL) {
- for (i = 0; i < specs->modedb_len; i++) {
- if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
- mode = specs->modedb[i];
- found = 1;
- break;
- }
- }
- }
-
if (!found) {
- mode = specs->modedb[0];
+ m = fb_find_best_display(&info->monspecs, &info->modelist);
+ mode = *m;
found = 1;
}
vsync2 = simple_strtoul(this_opt+7, NULL, 0);
else if (!strncmp(this_opt, "dcolor", 6))
dcolor = 1;
+ else if (!strncmp(this_opt, "ddc3", 4))
+ ddc3 = 3;
else
mode_option = this_opt;
}
iounmap(par->mmio_start_virtual);
if (par->aperture.virtual)
iounmap(par->aperture.virtual);
- if (par->edid)
- kfree(par->edid);
+ kfree(par->edid);
if (par->res_flags & FRAMEBUFFER_REQ)
release_mem_region(par->aperture.physical,
par->aperture.size);
static void __exit i810fb_remove_pci(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
- struct i810fb_par *par = (struct i810fb_par *) info->par;
+ struct i810fb_par *par = info->par;
unregister_framebuffer(info);
i810fb_release_resource(info, par);
module_param(dcolor, bool, 0);
MODULE_PARM_DESC(dcolor, "use DirectColor visuals"
" (default = 0 = TrueColor)");
+module_param(ddc3, bool, 0);
+MODULE_PARM_DESC(ddc3, "Probe DDC bus 3 (default = 0 = no)");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Specify initial video mode");
projects / linux-2.6-omap-h63xx.git / blobdiff