V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE

[linux-2.6-omap-h63xx.git] / drivers / watchdog / Kconfig

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fbd61127b9d9942ccd96f1ddcbab383d7d2761a2..ccb78f66c2b6c3a24c509bb62f6341347152ec4f 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -295,6 +295,19 @@ config ALIM7101_WDT
 
          Most people will say N.
 
+config GEODE_WDT
+       tristate "AMD Geode CS5535/CS5536 Watchdog"
+       depends on MGEODE_LX
+       help
+         This driver enables a watchdog capability built into the
+         CS5535/CS5536 companion chips for the AMD Geode GX and LX
+         processors.  This watchdog watches your kernel to make sure
+         it doesn't freeze, and if it does, it reboots your computer after
+         a certain amount of time.
+
+         You can compile this driver directly into the kernel, or use
+         it as a module.  The module will be called geodewdt.
+
 config SC520_WDT
        tristate "AMD Elan SC520 processor Watchdog"
        depends on X86
@@ -402,6 +415,18 @@ config IT8712F_WDT
          To compile this driver as a module, choose M here: the
          module will be called it8712f_wdt.
 
+config HP_WATCHDOG
+       tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+       depends on X86
+       help
+         A software monitoring watchdog and NMI sourcing driver. This driver
+         will detect lockups and provide stack trace. Also, when an NMI
+         occurs this driver will make the necessary BIOS calls to log
+         the cause of the NMI. This is a driver that will only load on a
+         HP ProLiant system with a minimum of iLO2 support.
+         To compile this driver as a module, choose M here: the
+         module will be called hpwdt.
+
 config SC1200_WDT
        tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
        depends on X86
@@ -609,7 +634,7 @@ config SBC_EPX_C3_WATCHDOG
 
 config INDYDOG
        tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_IP22
+       depends on SGI_HAS_INDYDOG
        help
          Hardware driver for the Indy's/I2's watchdog. This is a
          watchdog timer that will reboot the machine after a 60 second
@@ -633,12 +658,31 @@ config WDT_RM9K_GPI
          To compile this driver as a module, choose M here: the
          module will be called rm9k_wdt.
 
+config SIBYTE_WDOG
+       tristate "Sibyte SoC hardware watchdog"
+       depends on CPU_SB1
+       help
+         Watchdog driver for the built in watchdog hardware in Sibyte
+         SoC processors.  There are apparently two watchdog timers
+         on such processors; this driver supports only the first one,
+         because currently Linux only supports exporting one watchdog
+         to userspace.
+
+         To compile this driver as a loadable module, choose M here.
+         The module will be called sb_wdog.
+
 config AR7_WDT
        tristate "TI AR7 Watchdog Timer"
        depends on AR7
        help
          Hardware driver for the TI AR7 Watchdog Timer.
 
+config TXX9_WDT
+       tristate "Toshiba TXx9 Watchdog Timer"
+       depends on CPU_TX39XX || CPU_TX49XX
+       help
+         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
 # PARISC Architecture
 
 # POWERPC Architecture