tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
depends on EXPERIMENTAL
select JBD2
+ select CRC16
help
Ext4dev is a predecessor filesystem of the next generation
extended fs ext4, based on ext3 filesystem code. It will be
config JBD_DEBUG
bool "JBD (ext3) debugging support"
- depends on JBD
+ depends on JBD && DEBUG_FS
help
If you are using the ext3 journaled file system (or potentially any
other file system/device using JBD), this option allows you to
debugging output will be turned off.
If you select Y here, then you will be able to turn on debugging
- with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
- 1 and 5, the higher the number, the more debugging output is
- generated. To turn debugging off again, do
- "echo 0 > /proc/sys/fs/jbd-debug".
+ with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
+ number between 1 and 5, the higher the number, the more debugging
+ output is generated. To turn debugging off again, do
+ "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
config JBD2
tristate
with the quota tools. Probably the quota support is only useful for
multi user systems. If unsure, say N.
+config QUOTA_NETLINK_INTERFACE
+ bool "Report quota messages through netlink interface"
+ depends on QUOTA && NET
+ help
+ If you say Y here, quota warnings (about exceeding softlimit, reaching
+ hardlimit, etc.) will be reported through netlink interface. If unsure,
+ say Y.
+
+config PRINT_QUOTA_WARNING
+ bool "Print quota warnings to console (OBSOLETE)"
+ depends on QUOTA
+ default y
+ help
+ If you say Y here, quota warnings (about exceeding softlimit, reaching
+ hardlimit, etc.) will be printed to the process' controlling terminal.
+ Note that this behavior is currently deprecated and may go away in
+ future. Please use notification via netlink socket instead.
+
config QFMT_V1
tristate "Old quota format support"
depends on QUOTA
default y
config DNOTIFY
- bool "Dnotify support" if EMBEDDED
+ bool "Dnotify support"
default y
help
Dnotify is a directory-based per-fd file change notification system
superior alternatives, but some applications may still rely on
dnotify.
- Because of this, if unsure, say Y.
+ If unsure, say Y.
config AUTOFS_FS
tristate "Kernel automounter support"
config HUGETLB_PAGE
def_bool HUGETLBFS
-config RAMFS
- bool
- default y
- ---help---
- Ramfs is a file system which keeps all files in RAM. It allows
- read and write access.
-
- It is more of an programming example than a useable file system. If
- you need a file system which lives in RAM with limit checking use
- tmpfs.
-
- To compile this as a module, choose M here: the module will be called
- ramfs.
-
config CONFIGFS_FS
tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
depends on SYSFS && EXPERIMENTAL
- NOR flash with transparent ECC
- DataFlash
+config JFFS2_FS_WBUF_VERIFY
+ bool "Verify JFFS2 write-buffer reads"
+ depends on JFFS2_FS_WRITEBUFFER
+ default n
+ help
+ This causes JFFS2 to read back every page written through the
+ write-buffer, and check for errors.
+
config JFFS2_SUMMARY
bool "JFFS2 summary support (EXPERIMENTAL)"
depends on JFFS2_FS && EXPERIMENTAL
select ZLIB_DEFLATE
depends on JFFS2_FS
default y
- help
- Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
- hardware and operating system. See <http://www.gzip.org/zlib/> for
- further information.
+ help
+ Zlib is designed to be a free, general-purpose, legally unencumbered,
+ lossless data-compression library for use on virtually any computer
+ hardware and operating system. See <http://www.gzip.org/zlib/> for
+ further information.
+
+ Say 'Y' if unsure.
+
+config JFFS2_LZO
+ bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
+ select LZO_COMPRESS
+ select LZO_DECOMPRESS
+ depends on JFFS2_FS
+ default n
+ help
+ minilzo-based compression. Generally works better than Zlib.
- Say 'Y' if unsure.
+ This feature was added in July, 2007. Say 'N' if you need
+ compatibility with older bootloaders or kernels.
config JFFS2_RTIME
bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
depends on JFFS2_FS
default y
- help
- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+ help
+ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
config JFFS2_RUBIN
bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
depends on JFFS2_FS
default n
- help
- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+ help
+ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
choice
- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
- default JFFS2_CMODE_PRIORITY
- depends on JFFS2_FS
- help
- You can set here the default compression mode of JFFS2 from
- the available compression modes. Don't touch if unsure.
+ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+ default JFFS2_CMODE_PRIORITY
+ depends on JFFS2_FS
+ help
+ You can set here the default compression mode of JFFS2 from
+ the available compression modes. Don't touch if unsure.
config JFFS2_CMODE_NONE
- bool "no compression"
- help
- Uses no compression.
+ bool "no compression"
+ help
+ Uses no compression.
config JFFS2_CMODE_PRIORITY
- bool "priority"
- help
- Tries the compressors in a predefined order and chooses the first
- successful one.
+ bool "priority"
+ help
+ Tries the compressors in a predefined order and chooses the first
+ successful one.
config JFFS2_CMODE_SIZE
- bool "size (EXPERIMENTAL)"
- help
- Tries all compressors and chooses the one which has the smallest
- result.
+ bool "size (EXPERIMENTAL)"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result.
+
+config JFFS2_CMODE_FAVOURLZO
+ bool "Favour LZO"
+ help
+ Tries all compressors and chooses the one which has the smallest
+ result but gives some preference to LZO (which has faster
+ decompression) at the expense of size.
endchoice
endmenu
-menu "Network File Systems"
+menuconfig NETWORK_FILESYSTEMS
+ bool "Network File Systems"
+ default y
depends on NET
+ ---help---
+ Say Y here to get to see options for network filesystems and
+ filesystem-related networking code, such as NFS daemon and
+ RPCSEC security modules.
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and
+ disabled; if unsure, say Y here.
+
+if NETWORK_FILESYSTEMS
config NFS_FS
tristate "NFS file system support"
config SUNRPC_GSS
tristate
+config SUNRPC_XPRT_RDMA
+ tristate "RDMA transport for sunrpc (EXPERIMENTAL)"
+ depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+ default m
+ help
+ Adds a client RPC transport for supporting kernel NFS over RDMA
+ mounts, including Infiniband and iWARP. Experimental.
+
config SUNRPC_BIND34
bool "Support for rpcbind versions 3 & 4 (EXPERIMENTAL)"
depends on SUNRPC && EXPERIMENTAL
If unsure, say N.
-endmenu
+endif # NETWORK_FILESYSTEMS
if BLOCK
menu "Partition Types"