Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

[linux-2.6-omap-h63xx.git] / include / asm-mips / mach-cobalt / cobalt.h

diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
index 684a501c04cfcf9f900e0bd3c70640f65d9d7505..a79e7caf3a862f07c776020c6e078e8ad9d63e33 100644 (file)
--- a/include/asm-mips/mach-cobalt/cobalt.h
+++ b/include/asm-mips/mach-cobalt/cobalt.h
@@ -12,76 +12,16 @@
 #ifndef __ASM_COBALT_H
 #define __ASM_COBALT_H
 
-#include <irq.h>
-
-/*
- * i8259 legacy interrupts used on Cobalt:
- *
- *     8  - RTC
- *     9  - PCI
- *    14  - IDE0
- *    15  - IDE1
- */
-#define COBALT_QUBE_SLOT_IRQ   9
-
 /*
- * CPU IRQs  are 16 ... 23
- */
-#define COBALT_CPU_IRQ         MIPS_CPU_IRQ_BASE
-
-#define COBALT_GALILEO_IRQ     (COBALT_CPU_IRQ + 2)
-#define COBALT_SCC_IRQ          (COBALT_CPU_IRQ + 3)   /* pre-production has 85C30 */
-#define COBALT_RAQ_SCSI_IRQ    (COBALT_CPU_IRQ + 3)
-#define COBALT_ETH0_IRQ                (COBALT_CPU_IRQ + 3)
-#define COBALT_QUBE1_ETH0_IRQ  (COBALT_CPU_IRQ + 4)
-#define COBALT_ETH1_IRQ                (COBALT_CPU_IRQ + 4)
-#define COBALT_SERIAL_IRQ      (COBALT_CPU_IRQ + 5)
-#define COBALT_SCSI_IRQ         (COBALT_CPU_IRQ + 5)
-#define COBALT_VIA_IRQ         (COBALT_CPU_IRQ + 6)    /* Chained to VIA ISA bridge */
-
-/*
- * PCI configuration space manifest constants.  These are wired into
- * the board layout according to the PCI spec to enable the software
- * to probe the hardware configuration space in a well defined manner.
- *
- * The PCI_DEVSHFT() macro transforms these values into numbers
- * suitable for passing as the dev parameter to the various
- * pcibios_read/write_config routines.
+ * The Cobalt board ID information.
  */
-#define COBALT_PCICONF_CPU      0x06
-#define COBALT_PCICONF_ETH0     0x07
-#define COBALT_PCICONF_RAQSCSI  0x08
-#define COBALT_PCICONF_VIA      0x09
-#define COBALT_PCICONF_PCISLOT  0x0A
-#define COBALT_PCICONF_ETH1     0x0C
-
+extern int cobalt_board_id;
 
-/*
- * The Cobalt board id information.  The boards have an ID number wired
- * into the VIA that is available in the high nibble of register 94.
- * This register is available in the VIA configuration space through the
- * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
- */
-#define VIA_COBALT_BRD_ID_REG  0x94
-#define VIA_COBALT_BRD_REG_to_ID(reg)  ((unsigned char) (reg) >> 4)
 #define COBALT_BRD_ID_QUBE1    0x3
 #define COBALT_BRD_ID_RAQ1     0x4
 #define COBALT_BRD_ID_QUBE2    0x5
 #define COBALT_BRD_ID_RAQ2     0x6
 
-extern int cobalt_board_id;
-
-#define PCI_CFG_SET(devfn,where)                                       \
-       GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) |          \
-               (PCI_FUNC (devfn) << 8) | (where)))
-
-#define COBALT_LED_PORT                (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
-# define COBALT_LED_BAR_LEFT   (1 << 0)        /* Qube */
-# define COBALT_LED_BAR_RIGHT  (1 << 1)        /* Qube */
-# define COBALT_LED_WEB                (1 << 2)        /* RaQ */
-# define COBALT_LED_POWER_OFF  (1 << 3)        /* RaQ */
-# define COBALT_LED_RESET      0x0f
-
 #define COBALT_KEY_PORT                ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
 # define COBALT_KEY_CLEAR      (1 << 1)
 # define COBALT_KEY_LEFT       (1 << 2)
@@ -92,6 +32,4 @@ extern int cobalt_board_id;
 # define COBALT_KEY_SELECT     (1 << 7)
 # define COBALT_KEY_MASK       0xfe
 
-#define COBALT_UART            ((volatile unsigned char *) CKSEG1ADDR(0x1c800000))
-
 #endif /* __ASM_COBALT_H */