#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0
#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0
#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0
+#define MPIC_GREG_IPI_STRIDE 0x10
#define MPIC_GREG_SPURIOUS 0x000e0
#define MPIC_GREG_TIMER_FREQ 0x000f0
#define MPIC_CPU_IPI_DISPATCH_1 0x00050
#define MPIC_CPU_IPI_DISPATCH_2 0x00060
#define MPIC_CPU_IPI_DISPATCH_3 0x00070
+#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010
#define MPIC_CPU_CURRENT_TASK_PRI 0x00080
#define MPIC_CPU_TASKPRI_MASK 0x0000000f
#define MPIC_CPU_WHOAMI 0x00090
#define MPIC_VEC_TIMER_1 248
#define MPIC_VEC_TIMER_0 247
+/*
+ * Tsi108 implementation of MPIC has many differences from the original one
+ */
+
+/*
+ * Global registers
+ */
+
+#define TSI108_GREG_BASE 0x00000
+#define TSI108_GREG_FEATURE_0 0x00000
+#define TSI108_GREG_GLOBAL_CONF_0 0x00004
+#define TSI108_GREG_VENDOR_ID 0x0000c
+#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */
+#define TSI108_GREG_IPI_STRIDE 0x0c
+#define TSI108_GREG_SPURIOUS 0x00010
+#define TSI108_GREG_TIMER_FREQ 0x00014
+
+/*
+ * Timer registers
+ */
+#define TSI108_TIMER_BASE 0x0030
+#define TSI108_TIMER_STRIDE 0x10
+#define TSI108_TIMER_CURRENT_CNT 0x00000
+#define TSI108_TIMER_BASE_CNT 0x00004
+#define TSI108_TIMER_VECTOR_PRI 0x00008
+#define TSI108_TIMER_DESTINATION 0x0000c
+
+/*
+ * Per-Processor registers
+ */
+#define TSI108_CPU_BASE 0x00300
+#define TSI108_CPU_STRIDE 0x00040
+#define TSI108_CPU_IPI_DISPATCH_0 0x00200
+#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000
+#define TSI108_CPU_CURRENT_TASK_PRI 0x00000
+#define TSI108_CPU_WHOAMI 0xffffffff
+#define TSI108_CPU_INTACK 0x00004
+#define TSI108_CPU_EOI 0x00008
+
+/*
+ * Per-source registers
+ */
+#define TSI108_IRQ_BASE 0x00100
+#define TSI108_IRQ_STRIDE 0x00008
+#define TSI108_IRQ_VECTOR_PRI 0x00000
+#define TSI108_VECPRI_VECTOR_MASK 0x000000ff
+#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000
+#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000
+#define TSI108_VECPRI_SENSE_LEVEL 0x02000000
+#define TSI108_VECPRI_SENSE_EDGE 0x00000000
+#define TSI108_VECPRI_POLARITY_MASK 0x01000000
+#define TSI108_VECPRI_SENSE_MASK 0x02000000
+#define TSI108_IRQ_DESTINATION 0x00004
+
+/* weird mpic register indices and mask bits in the HW info array */
+enum {
+ MPIC_IDX_GREG_BASE = 0,
+ MPIC_IDX_GREG_FEATURE_0,
+ MPIC_IDX_GREG_GLOBAL_CONF_0,
+ MPIC_IDX_GREG_VENDOR_ID,
+ MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
+ MPIC_IDX_GREG_IPI_STRIDE,
+ MPIC_IDX_GREG_SPURIOUS,
+ MPIC_IDX_GREG_TIMER_FREQ,
+
+ MPIC_IDX_TIMER_BASE,
+ MPIC_IDX_TIMER_STRIDE,
+ MPIC_IDX_TIMER_CURRENT_CNT,
+ MPIC_IDX_TIMER_BASE_CNT,
+ MPIC_IDX_TIMER_VECTOR_PRI,
+ MPIC_IDX_TIMER_DESTINATION,
+
+ MPIC_IDX_CPU_BASE,
+ MPIC_IDX_CPU_STRIDE,
+ MPIC_IDX_CPU_IPI_DISPATCH_0,
+ MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
+ MPIC_IDX_CPU_CURRENT_TASK_PRI,
+ MPIC_IDX_CPU_WHOAMI,
+ MPIC_IDX_CPU_INTACK,
+ MPIC_IDX_CPU_EOI,
+
+ MPIC_IDX_IRQ_BASE,
+ MPIC_IDX_IRQ_STRIDE,
+ MPIC_IDX_IRQ_VECTOR_PRI,
+
+ MPIC_IDX_VECPRI_VECTOR_MASK,
+ MPIC_IDX_VECPRI_POLARITY_POSITIVE,
+ MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
+ MPIC_IDX_VECPRI_SENSE_LEVEL,
+ MPIC_IDX_VECPRI_SENSE_EDGE,
+ MPIC_IDX_VECPRI_POLARITY_MASK,
+ MPIC_IDX_VECPRI_SENSE_MASK,
+ MPIC_IDX_IRQ_DESTINATION,
+ MPIC_IDX_END
+};
+
+
#ifdef CONFIG_MPIC_BROKEN_U3
/* Fixup table entry */
struct mpic_irq_fixup
volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS];
volatile u32 __iomem *isus[MPIC_MAX_ISU];
+#ifdef CONFIG_MPIC_WEIRD
+ /* Pointer to HW info array */
+ u32 *hw_set;
+#endif
+
/* link */
struct mpic *next;
};
+/*
+ * MPIC flags (passed to mpic_alloc)
+ *
+ * The top 4 bits contain an MPIC bhw id that is used to index the
+ * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
+ * Note setting any ID (leaving those bits to 0) means standard MPIC
+ */
+
/* This is the primary controller, only that one has IPIs and
* has afinity control. A non-primary MPIC always uses CPU0
* registers only
*/
#define MPIC_PRIMARY 0x00000001
+
/* Set this for a big-endian MPIC */
#define MPIC_BIG_ENDIAN 0x00000002
/* Broken U3 MPIC */
#define MPIC_BROKEN_IPI 0x00000008
/* MPIC wants a reset */
#define MPIC_WANTS_RESET 0x00000010
+/* Spurious vector requires EOI */
+#define MPIC_SPV_EOI 0x00000020
+/* No passthrough disable */
+#define MPIC_NO_PTHROU_DIS 0x00000040
+
+/* MPIC HW modification ID */
+#define MPIC_REGSET_MASK 0xf0000000
+#define MPIC_REGSET(val) (((val) & 0xf ) << 28)
+#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf)
+
+#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */
+#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */
/* Allocate the controller structure and setup the linux irq descs
* for the range if interrupts passed in. No HW initialization is
void smp_mpic_message_pass(int target, int msg);
/* Fetch interrupt from a given mpic */
-extern unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
+extern unsigned int mpic_get_one_irq(struct mpic *mpic);
/* This one gets to the primary mpic */
-extern unsigned int mpic_get_irq(struct pt_regs *regs);
+extern unsigned int mpic_get_irq(void);
/* Set the EPIC clock ratio */
void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
projects / linux-2.6-omap-h63xx.git / blobdiff