#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_PGD_NR 0
+#define FIRST_USER_ADDRESS 0
#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
*
* Note that these bits preclude future use of a page size
* less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ * TLB1:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN................................. - - - - - - ERPN.......
+ *
+ * TLB2:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ * - PRESENT *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - FILE *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
+ * doesn't support SMP. So we can use this as software bit, like
+ * DIRTY.
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
+ * above bits. Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ * _PAGE_PRESENT
+ * _PAGE_FILE
+ * _PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
*/
+
#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
#define _PAGE_RW 0x00000002 /* S: Write permission */
-#define _PAGE_DIRTY 0x00000004 /* S: Page dirty */
+#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
#define _PAGE_USER 0x00000040 /* S: User page */
#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_COHERENT 0x00000200 /* H: M bit */
-#define _PAGE_FILE 0x00000400 /* S: nonlinear file mapping */
+#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */
#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
/* ERPN in a PTE never gets cleared, ignore it */
#define _PTE_NONE_MASK 0xffffffff00000000ULL
-#elif defined(CONFIG_E500)
-
+#elif defined(CONFIG_FSL_BOOKE)
/*
MMU Assist Register 3:
entries use the top 29 bits.
*/
-/* Definitions for e500 core */
-#define _PAGE_PRESENT 0x001 /* S: PTE contains a translation */
-#define _PAGE_USER 0x002 /* S: User page (maps to UR) */
-#define _PAGE_FILE 0x002 /* S: when !present: nonlinear file mapping */
-#define _PAGE_ACCESSED 0x004 /* S: Page referenced */
-#define _PAGE_HWWRITE 0x008 /* H: Dirty & RW, set in exception */
-#define _PAGE_RW 0x010 /* S: Write permission */
-#define _PAGE_HWEXEC 0x020 /* H: UX permission */
-
-#define _PAGE_ENDIAN 0x040 /* H: E bit */
-#define _PAGE_GUARDED 0x080 /* H: G bit */
-#define _PAGE_COHERENT 0x100 /* H: M bit */
-#define _PAGE_NO_CACHE 0x200 /* H: I bit */
-#define _PAGE_WRITETHRU 0x400 /* H: W bit */
-#define _PAGE_DIRTY 0x800 /* S: Page dirty */
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
+#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
+#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
+#define _PAGE_ACCESSED 0x00004 /* S: Page referenced */
+#define _PAGE_HWWRITE 0x00008 /* H: Dirty & RW, set in exception */
+#define _PAGE_RW 0x00010 /* S: Write permission */
+#define _PAGE_HWEXEC 0x00020 /* H: UX permission */
+
+#define _PAGE_ENDIAN 0x00040 /* H: E bit */
+#define _PAGE_GUARDED 0x00080 /* H: G bit */
+#define _PAGE_COHERENT 0x00100 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
+
+#ifdef CONFIG_PTE_64BIT
+#define _PAGE_DIRTY 0x08000 /* S: Page dirty */
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffffffff0000ULL
+#else
+#define _PAGE_DIRTY 0x00800 /* S: Page dirty */
+#endif
#define _PMD_PRESENT 0
#define _PMD_PRESENT_MASK (PAGE_MASK)
#define _PMD_BAD (~PAGE_MASK)
-#define NUM_TLBCAMS (16)
-
#elif defined(CONFIG_8xx)
/* Definitions for 8xx embedded chips. */
#define _PAGE_PRESENT 0x0001 /* Page is valid */
* Conversions between PTE values and page frame numbers.
*/
-#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+/* in some case we want to additionaly adjust where the pfn is in the pte to
+ * allow room for more flags */
+#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
+#else
+#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
+#endif
+
+#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define pfn_pte(pfn, prot) __pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
+ pgprot_val(prot))
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
/*
* Atomic PTE updates.
*
* pte_update clears and sets bit atomically, and returns
- * the old pte value.
- * The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
- * 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
+ * the old pte value. In the 64-bit PTE case we lock around the
+ * low PTE word since we expect ALL flag bits to be there
*/
+#ifndef CONFIG_PTE_64BIT
static inline unsigned long pte_update(pte_t *p, unsigned long clr,
unsigned long set)
{
" stwcx. %1,0,%3\n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p)
- : "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+ : "r" (p), "r" (clr), "r" (set), "m" (*p)
+ : "cc" );
+ return old;
+}
+#else
+static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
+ unsigned long set)
+{
+ unsigned long long old;
+ unsigned long tmp;
+
+ __asm__ __volatile__("\
+1: lwarx %L0,0,%4\n\
+ lwzx %0,0,%3\n\
+ andc %1,%L0,%5\n\
+ or %1,%1,%6\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %1,0,%4\n\
+ bne- 1b"
+ : "=&r" (old), "=&r" (tmp), "=m" (*p)
+ : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
: "cc" );
return old;
}
+#endif
/*
* set_pte stores a linux PTE into the linux page table.
projects / linux-2.6-omap-h63xx.git / blobdiff