* redefined by userlevel programs.
*/
#ifdef __readb
-# define readb(a) ({ unsigned long r_ = __raw_readb(a); mb(); r_; })
+# define readb(a) ({ unsigned int r_ = __raw_readb(a); mb(); r_; })
#endif
#ifdef __raw_readw
-# define readw(a) ({ unsigned long r_ = __raw_readw(a); mb(); r_; })
+# define readw(a) ({ unsigned int r_ = __raw_readw(a); mb(); r_; })
#endif
#ifdef __raw_readl
-# define readl(a) ({ unsigned long r_ = __raw_readl(a); mb(); r_; })
+# define readl(a) ({ unsigned int r_ = __raw_readl(a); mb(); r_; })
#endif
#ifdef __raw_writeb
# define writel(v,a) ({ __raw_writel((v),(a)); mb(); })
#endif
+#define __BUILD_MEMORY_STRING(bwlq, type) \
+ \
+static inline void writes##bwlq(volatile void __iomem *mem, \
+ const void *addr, unsigned int count) \
+{ \
+ const volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ __raw_write##bwlq(*__addr, mem); \
+ __addr++; \
+ } \
+} \
+ \
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
+ unsigned int count) \
+{ \
+ volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ *__addr = __raw_read##bwlq(mem); \
+ __addr++; \
+ } \
+}
+
+__BUILD_MEMORY_STRING(b, u8)
+__BUILD_MEMORY_STRING(w, u16)
#define writesl __raw_writesl
#define readsl __raw_readsl
#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */
+#define IO_SPACE_LIMIT 0xffffffff
+
/*
* This function provides a method for the generic case where a board-specific
* ioport_map simply needs to return the port + some arbitrary port base.
return *(volatile unsigned long*)addr;
}
+static inline unsigned long long ctrl_inq(unsigned long addr)
+{
+ return *(volatile unsigned long long*)addr;
+}
+
static inline void ctrl_outb(unsigned char b, unsigned long addr)
{
*(volatile unsigned char*)addr = b;
*(volatile unsigned long*)addr = b;
}
+static inline void ctrl_outq(unsigned long long b, unsigned long addr)
+{
+ *(volatile unsigned long long*)addr = b;
+}
+
static inline void ctrl_delay(void)
{
+#ifdef P2SEG
ctrl_inw(P2SEG);
+#endif
}
-#define IO_SPACE_LIMIT 0xffffffff
+/* Quad-word real-mode I/O, don't ask.. */
+unsigned long long peek_real_address_q(unsigned long long addr);
+unsigned long long poke_real_address_q(unsigned long long addr,
+ unsigned long long val);
-#ifdef CONFIG_MMU
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are trivial on the 1:1 Linux/SuperH mapping
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
- return PHYSADDR(address);
-}
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+ const char *name);
+extern void onchip_unmap(unsigned long vaddr);
-static inline void *phys_to_virt(unsigned long address)
-{
- return (void *)P1SEGADDR(address);
-}
-#else
-#define phys_to_virt(address) ((void *)(address))
+#if !defined(CONFIG_MMU)
#define virt_to_phys(address) ((unsigned long)(address))
+#define phys_to_virt(address) ((void *)(address))
+#else
+#define virt_to_phys(address) (__pa(address))
+#define phys_to_virt(address) (__va(address))
#endif
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-#define page_to_bus page_to_phys
-
/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
+ * On 32-bit SH, we traditionally have the whole physical address space
+ * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
+ * not need to do anything but place the address in the proper segment.
+ * This is true for P1 and P2 addresses, as well as some P3 ones.
+ * However, most of the P3 addresses and newer cores using extended
+ * addressing need to map through page tables, so the ioremap()
+ * implementation becomes a bit more complicated.
*
- * On SH, we traditionally have the whole physical address space mapped
- * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not
- * need to do anything but place the address in the proper segment. This
- * is true for P1 and P2 addresses, as well as some P3 ones. However,
- * most of the P3 addresses and newer cores using extended addressing
- * need to map through page tables, so the ioremap() implementation
- * becomes a bit more complicated. See arch/sh/mm/ioremap.c for
- * additional notes on this.
+ * See arch/sh/mm/ioremap.c for additional notes on this.
*
* We cheat a bit and always return uncachable areas until we've fixed
* the drivers to handle caching properly.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
+ * doesn't exist, so everything must go through page tables.
*/
#ifdef CONFIG_MMU
void __iomem *__ioremap(unsigned long offset, unsigned long size,
static inline void __iomem *
__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
{
+#ifdef CONFIG_SUPERH32
unsigned long last_addr = offset + size - 1;
/*
return (void __iomem *)P2SEGADDR(offset);
}
+#endif
return __ioremap(offset, size, flags);
}
#define iounmap(addr) \
__iounmap((addr))
-/*
- * The caches on some architectures aren't dma-coherent and have need to
- * handle this in software. There are three types of operations that
- * can be applied to dma buffers.
- *
- * - dma_cache_wback_inv(start, size) makes caches and RAM coherent by
- * writing the content of the caches back to memory, if necessary.
- * The function also invalidates the affected part of the caches as
- * necessary before DMA transfers from outside to memory.
- * - dma_cache_inv(start, size) invalidates the affected parts of the
- * caches. Dirty lines of the caches may be written back or simply
- * be discarded. This operation is necessary before dma operations
- * to the memory.
- * - dma_cache_wback(start, size) writes back any dirty lines but does
- * not invalidate the cache. This can be used before DMA reads from
- * memory,
- */
-
-#define dma_cache_wback_inv(_start,_size) \
- __flush_purge_region(_start,_size)
-#define dma_cache_inv(_start,_size) \
- __flush_invalidate_region(_start,_size)
-#define dma_cache_wback(_start,_size) \
- __flush_wback_region(_start,_size)
-
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access