-#ifdef __KERNEL__
-# ifdef CONFIG_X86_32
-# include "debugreg_32.h"
-# else
-# include "debugreg_64.h"
-# endif
+#ifndef ASM_X86__DEBUGREG_H
+#define ASM_X86__DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+ debug registers. Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */
+
+#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */
+#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register. We can use this to determine
+ which debugging register was responsible for the trap. The other bits
+ are either reserved or not of interest to us. */
+
+#define DR_TRAP0 (0x1) /* db0 */
+#define DR_TRAP1 (0x2) /* db1 */
+#define DR_TRAP2 (0x4) /* db2 */
+#define DR_TRAP3 (0x8) /* db3 */
+
+#define DR_STEP (0x4000) /* single-step */
+#define DR_SWITCH (0x8000) /* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+ The top two bytes of the control register consist of 4 fields of 4
+ bits - each field corresponds to one of the four debug registers,
+ and indicates what types of access we trap on, and how large the data
+ field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4 /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+#define DR_LEN_8 (0x8)
+
+/* The low byte to the control register determine which registers are
+ enabled. There are 4 fields of two bits. One bit is "local", meaning
+ that the processor will reset the bit after a task switch and the other
+ is global meaning that we have to explicitly reset the bit. With linux,
+ you can use either one, since we explicitly zero the register when we enter
+ kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */
+#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+ We can slow the instruction pipeline for instructions coming via the
+ gdt or the ldt if we want to. I am not sure why this is an advantage */
+
+#ifdef __i386__
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
#else
-# ifdef __i386__
-# include "debugreg_32.h"
-# else
-# include "debugreg_64.h"
-# endif
+#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
#endif
+
+#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */
+
+#endif /* ASM_X86__DEBUGREG_H */
projects / linux-2.6-omap-h63xx.git / blobdiff