Merge branch 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...

[linux-2.6-omap-h63xx.git] / include / linux / i2c / twl4030.h

diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index a8f84c01f82ec03f8419a2bffa95e33daea9424a..0dc80ef249752dea6c1d1cb735d6200341f46a9e 100644 (file)
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -218,6 +218,53 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /*----------------------------------------------------------------------*/
 
+/* Power bus message definitions */
+
+#define DEV_GRP_NULL           0x0
+#define DEV_GRP_P1             0x1
+#define DEV_GRP_P2             0x2
+#define DEV_GRP_P3             0x4
+
+#define RES_GRP_RES            0x0
+#define RES_GRP_PP             0x1
+#define RES_GRP_RC             0x2
+#define RES_GRP_PP_RC          0x3
+#define RES_GRP_PR             0x4
+#define RES_GRP_PP_PR          0x5
+#define RES_GRP_RC_PR          0x6
+#define RES_GRP_ALL            0x7
+
+#define RES_TYPE2_R0           0x0
+
+#define RES_TYPE_ALL           0x7
+
+#define RES_STATE_WRST         0xF
+#define RES_STATE_ACTIVE       0xE
+#define RES_STATE_SLEEP                0x8
+#define RES_STATE_OFF          0x0
+
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ *  Broadcast Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_GRP[11:9]  RES_TYPE2[8:7] RES_TYPE[6:4]
+ *    RES_STATE[3:0]
+ *
+ *  Singular Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_ID[11:4]  RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+       ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+       | (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+       ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+/*----------------------------------------------------------------------*/
+
 struct twl4030_bci_platform_data {
        int *battery_tmp_tbl;
        unsigned int tblsize;
@@ -234,6 +281,9 @@ struct twl4030_gpio_platform_data {
        /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
        u8              mmc_cd;
 
+       /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
+       u32             debounce;
+
        /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
         * should be enabled.  Else, if that bit is set in "pulldowns",
         * that pulldown is enabled.  Don't waste power by letting any
@@ -307,12 +357,6 @@ int twl4030_sih_setup(int module);
 #define TWL4030_VAUX3_DEV_GRP          0x1F
 #define TWL4030_VAUX3_DEDICATED                0x22
 
-/*
- * Exported TWL4030 GPIO APIs
- *
- * WARNING -- use standard GPIO and IRQ calls instead; these will vanish.
- */
-int twl4030_set_gpio_debounce(int gpio, int enable);
 
 #if defined(CONFIG_TWL4030_BCI_BATTERY) || \
        defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)