/*
- Copyright 2003-2004 Red Hat, Inc. All rights reserved.
- Copyright 2003-2004 Jeff Garzik
-
- The contents of this file are subject to the Open
- Software License version 1.1 that can be found at
- http://www.opensource.org/licenses/osl-1.1.txt and is included herein
- by reference.
-
- Alternatively, the contents of this file may be used under the terms
- of the GNU General Public License version 2 (the "GPL") as distributed
- in the kernel source COPYING file, in which case the provisions of
- the GPL are applicable instead of the above. If you wish to allow
- the use of your version of this file only under the terms of the
- GPL and not to allow others to use your version of this file under
- the OSL, indicate your decision by deleting the provisions above and
- replace them with the notice and other provisions required by the GPL.
- If you do not delete the provisions above, a recipient may use your
- version of this file under either the OSL or the GPL.
-
+ * Copyright 2003-2005 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2005 Jeff Garzik
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
*/
#ifndef __LINUX_LIBATA_H__
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
+ ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
+ * proper HSM is in place. */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
void (*host_stop) (struct ata_host_set *host_set);
- void (*bmdma_stop) (struct ata_port *ap);
+ void (*bmdma_stop) (struct ata_queued_cmd *qc);
u8 (*bmdma_status) (struct ata_port *ap);
};
extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
extern void ata_dev_id_string(u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
+extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_port *ap);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
unsigned long val;
};
+extern void ata_pci_host_stop (struct ata_host_set *host_set);
extern struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port);
extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits);
return ap->ops->check_status(ap);
}
+
+/**
+ * ata_pause - Flush writes and pause 400 nanoseconds.
+ * @ap: Port to wait for.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline void ata_pause(struct ata_port *ap)
{
ata_altstatus(ap);
ndelay(400);
}
+
+/**
+ * ata_busy_wait - Wait for a port status register
+ * @ap: Port to wait for.
+ *
+ * Waits up to max*10 microseconds for the selected bits in the port's
+ * status register to be cleared.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max)
{
return status;
}
+
+/**
+ * ata_wait_idle - Wait for a port to be idle.
+ * @ap: Port to wait for.
+ *
+ * Waits up to 10ms for port's BUSY and DRQ signals to clear.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
tf->device = ATA_DEVICE_OBS | ATA_DEV1;
}
+
+/**
+ * ata_irq_on - Enable interrupts on a port.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Enable interrupts on a legacy IDE device using MMIO or PIO,
+ * wait for idle, clear any pending interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
return tmp;
}
+
+/**
+ * ata_irq_ack - Acknowledge a device interrupt.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Wait up to 10 ms for legacy IDE device to become idle (BUSY
+ * or BUSY+DRQ clear). Obtain dma status and port status from
+ * device. Clear the interrupt. Return port status.
+ *
+ * LOCKING:
+ */
+
static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
ap->ops->scr_write(ap, reg, val);
}
-static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
+static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
u32 val)
{
ap->ops->scr_write(ap, reg, val);