]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - include/linux/nl80211.h
on_each_cpu(): kill unused 'retry' parameter
[linux-2.6-omap-h63xx.git] / include / linux / nl80211.h
index 9fecf902419c574eae20efe379fe50b2e8adbb9c..ea6517e58b04d74dddb1ab9db6fc06406e166dd3 100644 (file)
  *     or, if no MAC address given, all stations, on the interface identified
  *     by %NL80211_ATTR_IFINDEX.
  *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ *     destination %NL80211_ATTR_MAC on the interface identified by
+ *     %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
+ *     destination %NL80211_ATTR_MAC on the interface identified by
+ *     %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ *     the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ *     or, if no MAC address given, all mesh paths, on the interface identified
+ *     by %NL80211_ATTR_IFINDEX.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -112,6 +124,11 @@ enum nl80211_commands {
 
        /* add commands here */
 
+       NL80211_CMD_GET_MPATH,
+       NL80211_CMD_SET_MPATH,
+       NL80211_CMD_NEW_MPATH,
+       NL80211_CMD_DEL_MPATH,
+
        /* used to define NL80211_CMD_MAX below */
        __NL80211_CMD_AFTER_LAST,
        NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
@@ -157,9 +174,23 @@ enum nl80211_commands {
  *     restriction (at most %NL80211_MAX_SUPP_RATES).
  * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
  *     to, or the AP interface the station was originally added to to.
- * @NL80211_ATTR_STA_STATS: statistics for a station, part of station info
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
  *     given for %NL80211_CMD_GET_STATION, nested attribute containing
- *     info as possible, see &enum nl80211_sta_stats.
+ *     info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ *     consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ *     info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *     &enum nl80211_mpath_info.
+ *
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *      &enum nl80211_mntr_flags.
  *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -193,10 +224,19 @@ enum nl80211_attrs {
        NL80211_ATTR_STA_LISTEN_INTERVAL,
        NL80211_ATTR_STA_SUPPORTED_RATES,
        NL80211_ATTR_STA_VLAN,
-       NL80211_ATTR_STA_STATS,
+       NL80211_ATTR_STA_INFO,
+
+       NL80211_ATTR_WIPHY_BANDS,
+
+       NL80211_ATTR_MNTR_FLAGS,
 
        /* add attributes here, update the policy in nl80211.c */
 
+       NL80211_ATTR_MESH_ID,
+       NL80211_ATTR_STA_PLINK_ACTION,
+       NL80211_ATTR_MPATH_NEXT_HOP,
+       NL80211_ATTR_MPATH_INFO,
+
        __NL80211_ATTR_AFTER_LAST,
        NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
 };
@@ -213,6 +253,7 @@ enum nl80211_attrs {
  * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
  * @NL80211_IFTYPE_WDS: wireless distribution interface
  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @__NL80211_IFTYPE_AFTER_LAST: internal use
  *
@@ -228,6 +269,7 @@ enum nl80211_iftype {
        NL80211_IFTYPE_AP_VLAN,
        NL80211_IFTYPE_WDS,
        NL80211_IFTYPE_MONITOR,
+       NL80211_IFTYPE_MESH_POINT,
 
        /* keep last */
        __NL80211_IFTYPE_AFTER_LAST,
@@ -257,27 +299,167 @@ enum nl80211_sta_flags {
 };
 
 /**
- * enum nl80211_sta_stats - station statistics
+ * enum nl80211_sta_info - station information
  *
- * These attribute types are used with %NL80211_ATTR_STA_STATS
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
  * when getting information about a station.
  *
- * @__NL80211_STA_STAT_INVALID: attribute number 0 is reserved
- * @NL80211_STA_STAT_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_STAT_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_STAT_TX_BYTES: total transmitted bytes (u32, to this station)
- * @__NL80211_STA_STAT_AFTER_LAST: internal
- * @NL80211_STA_STAT_MAX: highest possible station stats attribute
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+       __NL80211_STA_INFO_INVALID,
+       NL80211_STA_INFO_INACTIVE_TIME,
+       NL80211_STA_INFO_RX_BYTES,
+       NL80211_STA_INFO_TX_BYTES,
+       NL80211_STA_INFO_LLID,
+       NL80211_STA_INFO_PLID,
+       NL80211_STA_INFO_PLINK_STATE,
+
+       /* keep last */
+       __NL80211_STA_INFO_AFTER_LAST,
+       NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+       NL80211_MPATH_FLAG_ACTIVE =     1<<0,
+       NL80211_MPATH_FLAG_RESOLVING =  1<<1,
+       NL80211_MPATH_FLAG_DSN_VALID =  1<<2,
+       NL80211_MPATH_FLAG_FIXED =      1<<3,
+       NL80211_MPATH_FLAG_RESOLVED =   1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_ATTR_MPATH_DSN: destination sequence number
+ * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
+ * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
+ *     &enum nl80211_mpath_flags;
+ * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
+ */
+enum nl80211_mpath_info {
+       __NL80211_MPATH_INFO_INVALID,
+       NL80211_MPATH_INFO_FRAME_QLEN,
+       NL80211_MPATH_INFO_DSN,
+       NL80211_MPATH_INFO_METRIC,
+       NL80211_MPATH_INFO_EXPTIME,
+       NL80211_MPATH_INFO_FLAGS,
+       NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+       NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+       /* keep last */
+       __NL80211_MPATH_INFO_AFTER_LAST,
+       NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ *     an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ *     an array of nested bitrate attributes
+ */
+enum nl80211_band_attr {
+       __NL80211_BAND_ATTR_INVALID,
+       NL80211_BAND_ATTR_FREQS,
+       NL80211_BAND_ATTR_RATES,
+
+       /* keep last */
+       __NL80211_BAND_ATTR_AFTER_LAST,
+       NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ *     regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
+ *     permitted on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
+ *     on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ *     on this channel in current regulatory domain.
+ */
+enum nl80211_frequency_attr {
+       __NL80211_FREQUENCY_ATTR_INVALID,
+       NL80211_FREQUENCY_ATTR_FREQ,
+       NL80211_FREQUENCY_ATTR_DISABLED,
+       NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
+       NL80211_FREQUENCY_ATTR_NO_IBSS,
+       NL80211_FREQUENCY_ATTR_RADAR,
+
+       /* keep last */
+       __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+       NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ *     in 2.4 GHz band.
+ */
+enum nl80211_bitrate_attr {
+       __NL80211_BITRATE_ATTR_INVALID,
+       NL80211_BITRATE_ATTR_RATE,
+       NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+       /* keep last */
+       __NL80211_BITRATE_ATTR_AFTER_LAST,
+       NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ *     overrides all other flags.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
  */
-enum nl80211_sta_stats {
-       __NL80211_STA_STAT_INVALID,
-       NL80211_STA_STAT_INACTIVE_TIME,
-       NL80211_STA_STAT_RX_BYTES,
-       NL80211_STA_STAT_TX_BYTES,
+enum nl80211_mntr_flags {
+       __NL80211_MNTR_FLAG_INVALID,
+       NL80211_MNTR_FLAG_FCSFAIL,
+       NL80211_MNTR_FLAG_PLCPFAIL,
+       NL80211_MNTR_FLAG_CONTROL,
+       NL80211_MNTR_FLAG_OTHER_BSS,
+       NL80211_MNTR_FLAG_COOK_FRAMES,
 
        /* keep last */
-       __NL80211_STA_STAT_AFTER_LAST,
-       NL80211_STA_STAT_MAX = __NL80211_STA_STAT_AFTER_LAST - 1
+       __NL80211_MNTR_FLAG_AFTER_LAST,
+       NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
 };
 
 #endif /* __LINUX_NL80211_H */