NR_CPUS: Replace NR_CPUS in speedstep-centrino.c

[linux-2.6-omap-h63xx.git] / include / linux / pci_regs.h

diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index c1914a8b94a975fa5360722536b49a3746c29028..19958b929905beb2af8a0a6ca6802510379c232a 100644 (file)
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -231,6 +231,7 @@
 #define  PCI_PM_CAP_PME_D2     0x2000  /* PME# from D2 */
 #define  PCI_PM_CAP_PME_D3     0x4000  /* PME# from D3 (hot) */
 #define  PCI_PM_CAP_PME_D3cold 0x8000  /* PME# from D3 (cold) */
+#define  PCI_PM_CAP_PME_SHIFT  11      /* Start of the PME Mask in PMC */
 #define PCI_PM_CTRL            4       /* PM control and status register */
 #define  PCI_PM_CTRL_STATE_MASK        0x0003  /* Current power state (D0 to D3) */
 #define  PCI_PM_CTRL_NO_SOFT_RESET     0x0004  /* No reset for D3hot->D0 */
@@ -395,9 +396,17 @@
 #define  PCI_EXP_DEVSTA_AUXPD  0x10    /* AUX Power Detected */
 #define  PCI_EXP_DEVSTA_TRPND  0x20    /* Transactions Pending */
 #define PCI_EXP_LNKCAP         12      /* Link Capabilities */
+#define  PCI_EXP_LNKCAP_ASPMS  0xc00   /* ASPM Support */
+#define  PCI_EXP_LNKCAP_L0SEL  0x7000  /* L0s Exit Latency */
+#define  PCI_EXP_LNKCAP_L1EL   0x38000 /* L1 Exit Latency */
+#define  PCI_EXP_LNKCAP_CLKPM  0x40000 /* L1 Clock Power Management */
 #define PCI_EXP_LNKCTL         16      /* Link Control */
+#define  PCI_EXP_LNKCTL_RL     0x20    /* Retrain Link */
+#define  PCI_EXP_LNKCTL_CCC    0x40    /* Common Clock COnfiguration */
 #define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100        /* Enable clkreq */
 #define PCI_EXP_LNKSTA         18      /* Link Status */
+#define  PCI_EXP_LNKSTA_LT     0x800   /* Link Training */
+#define  PCI_EXP_LNKSTA_SLC    0x1000  /* Slot Clock Configuration */
 #define PCI_EXP_SLTCAP         20      /* Slot Capabilities */
 #define PCI_EXP_SLTCTL         24      /* Slot Control */
 #define PCI_EXP_SLTSTA         26      /* Slot Status */