* Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
*/
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @mesh_id: mesh ID to use
+ * @mesh_id_len: length of the mesh ID
+ */
+struct vif_params {
+ u8 *mesh_id;
+ int mesh_id_len;
+};
+
/* Radiotap header iteration
* implemented in net/wireless/radiotap.c
* docs in Documentation/networking/radiotap-headers.txt
STATION_FLAG_WME = 1<<NL80211_STA_FLAG_WME,
};
+/**
+ * enum plink_action - actions to perform in mesh peers
+ *
+ * @PLINK_ACTION_INVALID: action 0 is reserved
+ * @PLINK_ACTION_OPEN: start mesh peer link establishment
+ * @PLINK_ACTION_BLOCL: block traffic from this mesh peer
+ */
+enum plink_actions {
+ PLINK_ACTION_INVALID,
+ PLINK_ACTION_OPEN,
+ PLINK_ACTION_BLOCK,
+};
+
/**
* struct station_parameters - station parameters
*
int listen_interval;
u16 aid;
u8 supported_rates_len;
+ u8 plink_action;
+ struct ieee80211_ht_cap *ht_capa;
};
/**
- * enum station_stats_flags - station statistics flags
+ * enum station_info_flags - station information flags
*
- * Used by the driver to indicate which info in &struct station_stats
- * it has filled in during get_station().
+ * Used by the driver to indicate which info in &struct station_info
+ * it has filled in during get_station() or dump_station().
*
- * @STATION_STAT_INACTIVE_TIME: @inactive_time filled
- * @STATION_STAT_RX_BYTES: @rx_bytes filled
- * @STATION_STAT_TX_BYTES: @tx_bytes filled
+ * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
+ * @STATION_INFO_RX_BYTES: @rx_bytes filled
+ * @STATION_INFO_TX_BYTES: @tx_bytes filled
+ * @STATION_INFO_LLID: @llid filled
+ * @STATION_INFO_PLID: @plid filled
+ * @STATION_INFO_PLINK_STATE: @plink_state filled
*/
-enum station_stats_flags {
- STATION_STAT_INACTIVE_TIME = 1<<0,
- STATION_STAT_RX_BYTES = 1<<1,
- STATION_STAT_TX_BYTES = 1<<2,
+enum station_info_flags {
+ STATION_INFO_INACTIVE_TIME = 1<<0,
+ STATION_INFO_RX_BYTES = 1<<1,
+ STATION_INFO_TX_BYTES = 1<<2,
+ STATION_INFO_LLID = 1<<3,
+ STATION_INFO_PLID = 1<<4,
+ STATION_INFO_PLINK_STATE = 1<<5,
};
/**
- * struct station_stats - station statistics
+ * struct station_info - station information
*
- * Station information filled by driver for get_station().
+ * Station information filled by driver for get_station() and dump_station.
*
- * @filled: bitflag of flags from &enum station_stats_flags
+ * @filled: bitflag of flags from &enum station_info_flags
* @inactive_time: time since last station activity (tx/rx) in milliseconds
* @rx_bytes: bytes received from this station
* @tx_bytes: bytes transmitted to this station
+ * @llid: mesh local link id
+ * @plid: mesh peer link id
+ * @plink_state: mesh peer link state
*/
-struct station_stats {
+struct station_info {
u32 filled;
u32 inactive_time;
u32 rx_bytes;
u32 tx_bytes;
+ u16 llid;
+ u16 plid;
+ u8 plink_state;
};
+/**
+ * enum monitor_flags - monitor flags
+ *
+ * Monitor interface configuration flags. Note that these must be the bits
+ * according to the nl80211 flags.
+ *
+ * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @MONITOR_FLAG_CONTROL: pass control frames
+ * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
+ */
+enum monitor_flags {
+ MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL,
+ MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL,
+ MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL,
+ MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS,
+ MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
+};
+
+/**
+ * enum mpath_info_flags - mesh path information flags
+ *
+ * Used by the driver to indicate which info in &struct mpath_info it has filled
+ * in during get_station() or dump_station().
+ *
+ * MPATH_INFO_FRAME_QLEN: @frame_qlen filled
+ * MPATH_INFO_DSN: @dsn filled
+ * MPATH_INFO_METRIC: @metric filled
+ * MPATH_INFO_EXPTIME: @exptime filled
+ * MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
+ * MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
+ * MPATH_INFO_FLAGS: @flags filled
+ */
+enum mpath_info_flags {
+ MPATH_INFO_FRAME_QLEN = BIT(0),
+ MPATH_INFO_DSN = BIT(1),
+ MPATH_INFO_METRIC = BIT(2),
+ MPATH_INFO_EXPTIME = BIT(3),
+ MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4),
+ MPATH_INFO_DISCOVERY_RETRIES = BIT(5),
+ MPATH_INFO_FLAGS = BIT(6),
+};
+
+/**
+ * struct mpath_info - mesh path information
+ *
+ * Mesh path information filled by driver for get_mpath() and dump_mpath().
+ *
+ * @filled: bitfield of flags from &enum mpath_info_flags
+ * @frame_qlen: number of queued frames for this destination
+ * @dsn: destination sequence number
+ * @metric: metric (cost) of this mesh path
+ * @exptime: expiration time for the mesh path from now, in msecs
+ * @flags: mesh path flags
+ * @discovery_timeout: total mesh path discovery timeout, in msecs
+ * @discovery_retries: mesh path discovery retries
+ */
+struct mpath_info {
+ u32 filled;
+ u32 frame_qlen;
+ u32 dsn;
+ u32 metric;
+ u32 exptime;
+ u32 discovery_timeout;
+ u8 discovery_retries;
+ u8 flags;
+};
+
+/**
+ * struct bss_parameters - BSS parameters
+ *
+ * Used to change BSS parameters (mainly for AP mode).
+ *
+ * @use_cts_prot: Whether to use CTS protection
+ * (0 = no, 1 = yes, -1 = do not change)
+ * @use_short_preamble: Whether the use of short preambles is allowed
+ * (0 = no, 1 = yes, -1 = do not change)
+ * @use_short_slot_time: Whether the use of short slot time is allowed
+ * (0 = no, 1 = yes, -1 = do not change)
+ */
+struct bss_parameters {
+ int use_cts_prot;
+ int use_short_preamble;
+ int use_short_slot_time;
+};
+
+/**
+ * enum reg_set_by - Indicates who is trying to set the regulatory domain
+ * @REGDOM_SET_BY_INIT: regulatory domain was set by initialization. We will be
+ * using a static world regulatory domain by default.
+ * @REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world regulatory domain.
+ * @REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * regulatory domain.
+ * @REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the wireless core
+ * it thinks its knows the regulatory domain we should be in.
+ * @REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 802.11 country
+ * information element with regulatory information it thinks we
+ * should consider.
+ */
+enum reg_set_by {
+ REGDOM_SET_BY_INIT,
+ REGDOM_SET_BY_CORE,
+ REGDOM_SET_BY_USER,
+ REGDOM_SET_BY_DRIVER,
+ REGDOM_SET_BY_COUNTRY_IE,
+};
+
+struct ieee80211_freq_range {
+ u32 start_freq_khz;
+ u32 end_freq_khz;
+ u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+ u32 max_antenna_gain;
+ u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+ struct ieee80211_freq_range freq_range;
+ struct ieee80211_power_rule power_rule;
+ u32 flags;
+};
+
+struct ieee80211_regdomain {
+ u32 n_reg_rules;
+ char alpha2[2];
+ struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) (freq * 1000)
+#define KHZ_TO_MHZ(freq) (freq / 1000)
+#define DBI_TO_MBI(gain) (gain * 100)
+#define MBI_TO_DBI(gain) (gain / 100)
+#define DBM_TO_MBM(gain) (gain * 100)
+#define MBM_TO_DBM(gain) (gain / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
+ .freq_range.start_freq_khz = (start) * 1000, \
+ .freq_range.end_freq_khz = (end) * 1000, \
+ .freq_range.max_bandwidth_khz = (bw) * 1000, \
+ .power_rule.max_antenna_gain = (gain) * 100, \
+ .power_rule.max_eirp = (eirp) * 100, \
+ .flags = reg_flags, \
+ }
+
/* from net/wireless.h */
struct wiphy;
* wireless extensions but this is subject to reevaluation as soon as this
* code is used more widely and we have a first user without wext.
*
- * @add_virtual_intf: create a new virtual interface with the given name
+ * @add_virtual_intf: create a new virtual interface with the given name,
+ * must set the struct wireless_dev's iftype.
*
* @del_virtual_intf: remove the virtual interface determined by ifindex.
*
- * @change_virtual_intf: change type of virtual interface
+ * @change_virtual_intf: change type/configuration of virtual interface,
+ * keep the struct wireless_dev's iftype updated.
*
* @add_key: add a key with the given parameters. @mac_addr will be %NULL
* when adding a group key.
* @del_station: Remove a station; @mac may be NULL to remove all stations.
*
* @change_station: Modify a given station.
+ *
+ * @set_mesh_cfg: set mesh parameters (by now, just mesh id)
+ *
+ * @change_bss: Modify parameters for a given BSS.
*/
struct cfg80211_ops {
int (*add_virtual_intf)(struct wiphy *wiphy, char *name,
- enum nl80211_iftype type);
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params);
int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex);
int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex,
- enum nl80211_iftype type);
+ enum nl80211_iftype type, u32 *flags,
+ struct vif_params *params);
int (*add_key)(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index, u8 *mac_addr,
int (*change_station)(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_parameters *params);
int (*get_station)(struct wiphy *wiphy, struct net_device *dev,
- u8 *mac, struct station_stats *stats);
+ u8 *mac, struct station_info *sinfo);
+ int (*dump_station)(struct wiphy *wiphy, struct net_device *dev,
+ int idx, u8 *mac, struct station_info *sinfo);
+
+ int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *dst, u8 *next_hop);
+ int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *dst);
+ int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *dst, u8 *next_hop);
+ int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
+ u8 *dst, u8 *next_hop,
+ struct mpath_info *pinfo);
+ int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
+ int idx, u8 *dst, u8 *next_hop,
+ struct mpath_info *pinfo);
+
+ int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
+ struct bss_parameters *params);
};
#endif /* __NET_CFG80211_H */
projects / linux-2.6-omap-h63xx.git / blobdiff