]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - include/net/mac80211.h
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
[linux-2.6-omap-h63xx.git] / include / net / mac80211.h
index 4dd3d93e196025d162217a0d6107a28733ac7af9..b397e4d984c7a0a870f6969741a01b3daba2fea0 100644 (file)
@@ -177,9 +177,10 @@ enum ieee80211_bss_change {
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
+ * @dtim_period: num of beacons before the next DTIM, for PSM
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
- * @assoc_capability: capabbilities taken from assoc resp
+ * @assoc_capability: capabilities taken from assoc resp
  * @assoc_ht: association in HT mode
  * @ht_conf: ht capabilities
  * @ht_bss_conf: ht extended capabilities
@@ -191,6 +192,7 @@ struct ieee80211_bss_conf {
        /* erp related data */
        bool use_cts_prot;
        bool use_short_preamble;
+       u8 dtim_period;
        u16 beacon_int;
        u16 assoc_capability;
        u64 timestamp;
@@ -206,8 +208,6 @@ struct ieee80211_bss_conf {
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
  * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
- *     e.g., for EAPOL frame
  * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
  * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
  *     for combined 802.11g / 802.11b networks)
@@ -220,7 +220,6 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
  * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
  *     through set_retry_limit configured long retry value
- * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
  * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
  * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
  * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@@ -253,7 +252,6 @@ struct ieee80211_bss_conf {
  */
 enum mac80211_tx_control_flags {
        IEEE80211_TX_CTL_REQ_TX_STATUS          = BIT(0),
-       IEEE80211_TX_CTL_DO_NOT_ENCRYPT         = BIT(1),
        IEEE80211_TX_CTL_USE_RTS_CTS            = BIT(2),
        IEEE80211_TX_CTL_USE_CTS_PROTECT        = BIT(3),
        IEEE80211_TX_CTL_NO_ACK                 = BIT(4),
@@ -263,7 +261,6 @@ enum mac80211_tx_control_flags {
        IEEE80211_TX_CTL_FIRST_FRAGMENT         = BIT(8),
        IEEE80211_TX_CTL_SHORT_PREAMBLE         = BIT(9),
        IEEE80211_TX_CTL_LONG_RETRY_LIMIT       = BIT(10),
-       IEEE80211_TX_CTL_EAPOL_FRAME            = BIT(11),
        IEEE80211_TX_CTL_SEND_AFTER_DTIM        = BIT(12),
        IEEE80211_TX_CTL_AMPDU                  = BIT(13),
        IEEE80211_TX_CTL_OFDM_HT                = BIT(14),
@@ -323,7 +320,6 @@ struct ieee80211_tx_info {
                        struct ieee80211_vif *vif;
                        struct ieee80211_key_conf *hw_key;
                        unsigned long jiffies;
-                       int ifindex;
                        u16 aid;
                        s8 rts_cts_rate_idx, alt_retry_rate_idx;
                        u8 retry_limit;
@@ -436,6 +432,7 @@ enum ieee80211_conf_flags {
  * @radio_enabled: when zero, driver is required to switch off the radio.
  *     TODO make a flag
  * @beacon_int: beacon interval (TODO make interface config)
+ * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
  * @max_antenna_gain: maximum antenna gain (in dBi)
@@ -450,6 +447,7 @@ struct ieee80211_conf {
        int radio_enabled;
 
        int beacon_int;
+       u16 listen_interval;
        u32 flags;
        int power_level;
        int max_antenna_gain;
@@ -746,7 +744,6 @@ enum ieee80211_tkip_key_type {
  *     Measurement, Channel Switch, Quieting, TPC
  */
 enum ieee80211_hw_flags {
-       IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE           = 1<<0,
        IEEE80211_HW_RX_INCLUDES_FCS                    = 1<<1,
        IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING        = 1<<2,
        IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE          = 1<<3,
@@ -792,6 +789,9 @@ enum ieee80211_hw_flags {
  * @max_signal: Maximum value for signal (rssi) in RX information, used
  *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
  *
+ * @max_listen_interval: max listen interval in units of beacon interval
+ *     that HW supports
+ *
  * @queues: number of available hardware transmit queues for
  *     data packets. WMM/QoS requires at least four, these
  *     queues need to have configurable access parameters.
@@ -819,7 +819,9 @@ struct ieee80211_hw {
        unsigned int extra_tx_headroom;
        int channel_change_time;
        int vif_data_size;
-       u16 queues, ampdu_queues;
+       u16 queues;
+       u16 ampdu_queues;
+       u16 max_listen_interval;
        s8 max_signal;
 };