[ARM] 5262/2: [AT91] Support for GPIO-connected buttons on SAM9260-EK board

[linux-2.6-omap-h63xx.git] / include / scsi / scsi_cmnd.h

diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 8d20e60a94b7e18b25f8d1c44d393635cd892211..f9f6e793575c0b7114c3162b25e430978977d2eb 100644 (file)
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -11,6 +11,23 @@
 struct Scsi_Host;
 struct scsi_device;
 
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
 struct scsi_data_buffer {
        struct sg_table table;
        unsigned length;
@@ -60,17 +77,21 @@ struct scsi_cmnd {
        int allowed;
        int timeout_per_command;
 
-       unsigned char cmd_len;
+       unsigned char prot_op;
+       unsigned char prot_type;
+
+       unsigned short cmd_len;
        enum dma_data_direction sc_data_direction;
 
        /* These elements define the operation we are about to perform */
-#define MAX_COMMAND_SIZE       16
-       unsigned char cmnd[MAX_COMMAND_SIZE];
+       unsigned char *cmnd;
 
        struct timer_list eh_timeout;   /* Used to time out the command. */
 
        /* These elements define the operation we ultimately want to perform */
        struct scsi_data_buffer sdb;
+       struct scsi_data_buffer *prot_sdb;
+
        unsigned underflow;     /* Return error if less than
                                   this amount is transferred */
 
@@ -192,4 +213,85 @@ static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
                                 buf, buflen);
 }
 
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+       /* Normal I/O */
+       SCSI_PROT_NORMAL = 0,
+
+       /* OS-HBA: Protected, HBA-Target: Unprotected */
+       SCSI_PROT_READ_INSERT,
+       SCSI_PROT_WRITE_STRIP,
+
+       /* OS-HBA: Unprotected, HBA-Target: Protected */
+       SCSI_PROT_READ_STRIP,
+       SCSI_PROT_WRITE_INSERT,
+
+       /* OS-HBA: Protected, HBA-Target: Protected */
+       SCSI_PROT_READ_PASS,
+       SCSI_PROT_WRITE_PASS,
+
+       /* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
+       SCSI_PROT_READ_CONVERT,
+       SCSI_PROT_WRITE_CONVERT,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+       scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+       return scmd->prot_op;
+}
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with.  However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+       SCSI_PROT_DIF_TYPE0 = 0,
+       SCSI_PROT_DIF_TYPE1,
+       SCSI_PROT_DIF_TYPE2,
+       SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+       scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+       return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+       return scmd->request->sector;
+}
+
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+       return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+       return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+       return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)              \
+       for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
 #endif /* _SCSI_SCSI_CMND_H */