*/
int vmtruncate(struct inode * inode, loff_t offset)
{
- struct address_space *mapping = inode->i_mapping;
- unsigned long limit;
+ if (inode->i_size < offset) {
+ unsigned long limit;
+
+ limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
+ if (limit != RLIM_INFINITY && offset > limit)
+ goto out_sig;
+ if (offset > inode->i_sb->s_maxbytes)
+ goto out_big;
+ i_size_write(inode, offset);
+ } else {
+ struct address_space *mapping = inode->i_mapping;
- if (inode->i_size < offset)
- goto do_expand;
- /*
- * truncation of in-use swapfiles is disallowed - it would cause
- * subsequent swapout to scribble on the now-freed blocks.
- */
- if (IS_SWAPFILE(inode))
- goto out_busy;
- i_size_write(inode, offset);
+ /*
+ * truncation of in-use swapfiles is disallowed - it would
+ * cause subsequent swapout to scribble on the now-freed
+ * blocks.
+ */
+ if (IS_SWAPFILE(inode))
+ return -ETXTBSY;
+ i_size_write(inode, offset);
+
+ /*
+ * unmap_mapping_range is called twice, first simply for
+ * efficiency so that truncate_inode_pages does fewer
+ * single-page unmaps. However after this first call, and
+ * before truncate_inode_pages finishes, it is possible for
+ * private pages to be COWed, which remain after
+ * truncate_inode_pages finishes, hence the second
+ * unmap_mapping_range call must be made for correctness.
+ */
+ unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(mapping, offset);
+ unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
+ }
- /*
- * unmap_mapping_range is called twice, first simply for efficiency
- * so that truncate_inode_pages does fewer single-page unmaps. However
- * after this first call, and before truncate_inode_pages finishes,
- * it is possible for private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second unmap_mapping_range
- * call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- goto out_truncate;
-
-do_expand:
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out_big;
- i_size_write(inode, offset);
-
-out_truncate:
if (inode->i_op && inode->i_op->truncate)
inode->i_op->truncate(inode);
return 0;
+
out_sig:
send_sig(SIGXFSZ, current, 0);
out_big:
return -EFBIG;
-out_busy:
- return -ETXTBSY;
}
EXPORT_SYMBOL(vmtruncate);
return 0;
}
-/**
- * swapin_readahead - swap in pages in hope we need them soon
- * @entry: swap entry of this memory
- * @addr: address to start
- * @vma: user vma this addresses belong to
- *
- * Primitive swap readahead code. We simply read an aligned block of
- * (1 << page_cluster) entries in the swap area. This method is chosen
- * because it doesn't cost us any seek time. We also make sure to queue
- * the 'original' request together with the readahead ones...
- *
- * This has been extended to use the NUMA policies from the mm triggering
- * the readahead.
- *
- * Caller must hold down_read on the vma->vm_mm if vma is not NULL.
- */
-void swapin_readahead(swp_entry_t entry, unsigned long addr,struct vm_area_struct *vma)
-{
-#ifdef CONFIG_NUMA
- struct vm_area_struct *next_vma = vma ? vma->vm_next : NULL;
-#endif
- int i, num;
- struct page *new_page;
- unsigned long offset;
-
- /*
- * Get the number of handles we should do readahead io to.
- */
- num = valid_swaphandles(entry, &offset);
- for (i = 0; i < num; offset++, i++) {
- /* Ok, do the async read-ahead now */
- new_page = read_swap_cache_async(swp_entry(swp_type(entry),
- offset), vma, addr);
- if (!new_page)
- break;
- page_cache_release(new_page);
-#ifdef CONFIG_NUMA
- /*
- * Find the next applicable VMA for the NUMA policy.
- */
- addr += PAGE_SIZE;
- if (addr == 0)
- vma = NULL;
- if (vma) {
- if (addr >= vma->vm_end) {
- vma = next_vma;
- next_vma = vma ? vma->vm_next : NULL;
- }
- if (vma && addr < vma->vm_start)
- vma = NULL;
- } else {
- if (next_vma && addr >= next_vma->vm_start) {
- vma = next_vma;
- next_vma = vma->vm_next;
- }
- }
-#endif
- }
- lru_add_drain(); /* Push any new pages onto the LRU now */
-}
-
/*
* We enter with non-exclusive mmap_sem (to exclude vma changes,
* but allow concurrent faults), and pte mapped but not yet locked.
page = lookup_swap_cache(entry);
if (!page) {
grab_swap_token(); /* Contend for token _before_ read-in */
- swapin_readahead(entry, address, vma);
- page = read_swap_cache_async(entry, vma, address);
+ page = swapin_readahead(entry,
+ GFP_HIGHUSER_MOVABLE, vma, address);
if (!page) {
/*
* Back out if somebody else faulted in this pte
return ret == len ? 0 : -1;
}
-/*
- * Map a vmalloc()-space virtual address to the physical page.
- */
-struct page * vmalloc_to_page(void * vmalloc_addr)
-{
- unsigned long addr = (unsigned long) vmalloc_addr;
- struct page *page = NULL;
- pgd_t *pgd = pgd_offset_k(addr);
- pud_t *pud;
- pmd_t *pmd;
- pte_t *ptep, pte;
-
- if (!pgd_none(*pgd)) {
- pud = pud_offset(pgd, addr);
- if (!pud_none(*pud)) {
- pmd = pmd_offset(pud, addr);
- if (!pmd_none(*pmd)) {
- ptep = pte_offset_map(pmd, addr);
- pte = *ptep;
- if (pte_present(pte))
- page = pte_page(pte);
- pte_unmap(ptep);
- }
- }
- }
- return page;
-}
-
-EXPORT_SYMBOL(vmalloc_to_page);
-
-/*
- * Map a vmalloc()-space virtual address to the physical page frame number.
- */
-unsigned long vmalloc_to_pfn(void * vmalloc_addr)
-{
- return page_to_pfn(vmalloc_to_page(vmalloc_addr));
-}
-
-EXPORT_SYMBOL(vmalloc_to_pfn);
-
#if !defined(__HAVE_ARCH_GATE_AREA)
#if defined(AT_SYSINFO_EHDR)
projects / linux-2.6-omap-h63xx.git / blobdiff