BUG_ON(PageActive(page));
sc->nr_scanned++;
+
+ if (!sc->may_swap && page_mapped(page))
+ goto keep_locked;
+
/* Double the slab pressure for mapped and swapcache pages */
if (page_mapped(page) || PageSwapCache(page))
sc->nr_scanned++;
if (!sc->may_swap)
goto keep_locked;
- switch (try_to_unmap(page)) {
+ switch (try_to_unmap(page, 0)) {
case SWAP_FAIL:
goto activate_locked;
case SWAP_AGAIN:
return count;
}
+/*
+ * Non migratable page
+ */
+int fail_migrate_page(struct page *newpage, struct page *page)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(fail_migrate_page);
+
/*
* swapout a single page
* page is locked upon entry, unlocked on exit
struct address_space *mapping = page_mapping(page);
if (page_mapped(page) && mapping)
- if (try_to_unmap(page) != SWAP_SUCCESS)
+ if (try_to_unmap(page, 1) != SWAP_SUCCESS)
goto unlock_retry;
if (PageDirty(page)) {
retry:
return -EAGAIN;
}
+EXPORT_SYMBOL(swap_page);
+
+/*
+ * Page migration was first developed in the context of the memory hotplug
+ * project. The main authors of the migration code are:
+ *
+ * IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
+ * Hirokazu Takahashi <taka@valinux.co.jp>
+ * Dave Hansen <haveblue@us.ibm.com>
+ * Christoph Lameter <clameter@sgi.com>
+ */
+
+/*
+ * Remove references for a page and establish the new page with the correct
+ * basic settings to be able to stop accesses to the page.
+ */
+int migrate_page_remove_references(struct page *newpage,
+ struct page *page, int nr_refs)
+{
+ struct address_space *mapping = page_mapping(page);
+ struct page **radix_pointer;
+
+ /*
+ * Avoid doing any of the following work if the page count
+ * indicates that the page is in use or truncate has removed
+ * the page.
+ */
+ if (!mapping || page_mapcount(page) + nr_refs != page_count(page))
+ return 1;
+
+ /*
+ * Establish swap ptes for anonymous pages or destroy pte
+ * maps for files.
+ *
+ * In order to reestablish file backed mappings the fault handlers
+ * will take the radix tree_lock which may then be used to stop
+ * processses from accessing this page until the new page is ready.
+ *
+ * A process accessing via a swap pte (an anonymous page) will take a
+ * page_lock on the old page which will block the process until the
+ * migration attempt is complete. At that time the PageSwapCache bit
+ * will be examined. If the page was migrated then the PageSwapCache
+ * bit will be clear and the operation to retrieve the page will be
+ * retried which will find the new page in the radix tree. Then a new
+ * direct mapping may be generated based on the radix tree contents.
+ *
+ * If the page was not migrated then the PageSwapCache bit
+ * is still set and the operation may continue.
+ */
+ try_to_unmap(page, 1);
+
+ /*
+ * Give up if we were unable to remove all mappings.
+ */
+ if (page_mapcount(page))
+ return 1;
+
+ write_lock_irq(&mapping->tree_lock);
+
+ radix_pointer = (struct page **)radix_tree_lookup_slot(
+ &mapping->page_tree,
+ page_index(page));
+
+ if (!page_mapping(page) || page_count(page) != nr_refs ||
+ *radix_pointer != page) {
+ write_unlock_irq(&mapping->tree_lock);
+ return 1;
+ }
+
+ /*
+ * Now we know that no one else is looking at the page.
+ *
+ * Certain minimal information about a page must be available
+ * in order for other subsystems to properly handle the page if they
+ * find it through the radix tree update before we are finished
+ * copying the page.
+ */
+ get_page(newpage);
+ newpage->index = page->index;
+ newpage->mapping = page->mapping;
+ if (PageSwapCache(page)) {
+ SetPageSwapCache(newpage);
+ set_page_private(newpage, page_private(page));
+ }
+
+ *radix_pointer = newpage;
+ __put_page(page);
+ write_unlock_irq(&mapping->tree_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(migrate_page_remove_references);
+
+/*
+ * Copy the page to its new location
+ */
+void migrate_page_copy(struct page *newpage, struct page *page)
+{
+ copy_highpage(newpage, page);
+
+ if (PageError(page))
+ SetPageError(newpage);
+ if (PageReferenced(page))
+ SetPageReferenced(newpage);
+ if (PageUptodate(page))
+ SetPageUptodate(newpage);
+ if (PageActive(page))
+ SetPageActive(newpage);
+ if (PageChecked(page))
+ SetPageChecked(newpage);
+ if (PageMappedToDisk(page))
+ SetPageMappedToDisk(newpage);
+
+ if (PageDirty(page)) {
+ clear_page_dirty_for_io(page);
+ set_page_dirty(newpage);
+ }
+
+ ClearPageSwapCache(page);
+ ClearPageActive(page);
+ ClearPagePrivate(page);
+ set_page_private(page, 0);
+ page->mapping = NULL;
+
+ /*
+ * If any waiters have accumulated on the new page then
+ * wake them up.
+ */
+ if (PageWriteback(newpage))
+ end_page_writeback(newpage);
+}
+EXPORT_SYMBOL(migrate_page_copy);
+
+/*
+ * Common logic to directly migrate a single page suitable for
+ * pages that do not use PagePrivate.
+ *
+ * Pages are locked upon entry and exit.
+ */
+int migrate_page(struct page *newpage, struct page *page)
+{
+ BUG_ON(PageWriteback(page)); /* Writeback must be complete */
+
+ if (migrate_page_remove_references(newpage, page, 2))
+ return -EAGAIN;
+
+ migrate_page_copy(newpage, page);
+
+ /*
+ * Remove auxiliary swap entries and replace
+ * them with real ptes.
+ *
+ * Note that a real pte entry will allow processes that are not
+ * waiting on the page lock to use the new page via the page tables
+ * before the new page is unlocked.
+ */
+ remove_from_swap(newpage);
+ return 0;
+}
+EXPORT_SYMBOL(migrate_page);
+
/*
* migrate_pages
*
* pages are swapped out.
*
* The function returns after 10 attempts or if no pages
- * are movable anymore because t has become empty
+ * are movable anymore because to has become empty
* or no retryable pages exist anymore.
*
- * SIMPLIFIED VERSION: This implementation of migrate_pages
- * is only swapping out pages and never touches the second
- * list. The direct migration patchset
- * extends this function to avoid the use of swap.
- *
* Return: Number of pages not migrated when "to" ran empty.
*/
int migrate_pages(struct list_head *from, struct list_head *to,
retry = 0;
list_for_each_entry_safe(page, page2, from, lru) {
+ struct page *newpage = NULL;
+ struct address_space *mapping;
+
cond_resched();
rc = 0;
/* page was freed from under us. So we are done. */
goto next;
+ if (to && list_empty(to))
+ break;
+
/*
* Skip locked pages during the first two passes to give the
* functions holding the lock time to release the page. Later we
}
}
+ if (!to) {
+ rc = swap_page(page);
+ goto next;
+ }
+
+ newpage = lru_to_page(to);
+ lock_page(newpage);
+
/*
- * Page is properly locked and writeback is complete.
+ * Pages are properly locked and writeback is complete.
* Try to migrate the page.
*/
- rc = swap_page(page);
- goto next;
+ mapping = page_mapping(page);
+ if (!mapping)
+ goto unlock_both;
+
+ if (mapping->a_ops->migratepage) {
+ /*
+ * Most pages have a mapping and most filesystems
+ * should provide a migration function. Anonymous
+ * pages are part of swap space which also has its
+ * own migration function. This is the most common
+ * path for page migration.
+ */
+ rc = mapping->a_ops->migratepage(newpage, page);
+ goto unlock_both;
+ }
+
+ /*
+ * Default handling if a filesystem does not provide
+ * a migration function. We can only migrate clean
+ * pages so try to write out any dirty pages first.
+ */
+ if (PageDirty(page)) {
+ switch (pageout(page, mapping)) {
+ case PAGE_KEEP:
+ case PAGE_ACTIVATE:
+ goto unlock_both;
+
+ case PAGE_SUCCESS:
+ unlock_page(newpage);
+ goto next;
+
+ case PAGE_CLEAN:
+ ; /* try to migrate the page below */
+ }
+ }
+
+ /*
+ * Buffers are managed in a filesystem specific way.
+ * We must have no buffers or drop them.
+ */
+ if (!page_has_buffers(page) ||
+ try_to_release_page(page, GFP_KERNEL)) {
+ rc = migrate_page(newpage, page);
+ goto unlock_both;
+ }
+
+ /*
+ * On early passes with mapped pages simply
+ * retry. There may be a lock held for some
+ * buffers that may go away. Later
+ * swap them out.
+ */
+ if (pass > 4) {
+ /*
+ * Persistently unable to drop buffers..... As a
+ * measure of last resort we fall back to
+ * swap_page().
+ */
+ unlock_page(newpage);
+ newpage = NULL;
+ rc = swap_page(page);
+ goto next;
+ }
+
+unlock_both:
+ unlock_page(newpage);
unlock_page:
unlock_page(page);
list_move(&page->lru, failed);
nr_failed++;
} else {
- /* Success */
+ if (newpage) {
+ /* Successful migration. Return page to LRU */
+ move_to_lru(newpage);
+ }
list_move(&page->lru, moved);
}
}
struct page *page;
struct pagevec pvec;
int reclaim_mapped = 0;
- long mapped_ratio;
- long distress;
- long swap_tendency;
+
+ if (unlikely(sc->may_swap)) {
+ long mapped_ratio;
+ long distress;
+ long swap_tendency;
+
+ /*
+ * `distress' is a measure of how much trouble we're having
+ * reclaiming pages. 0 -> no problems. 100 -> great trouble.
+ */
+ distress = 100 >> zone->prev_priority;
+
+ /*
+ * The point of this algorithm is to decide when to start
+ * reclaiming mapped memory instead of just pagecache. Work out
+ * how much memory
+ * is mapped.
+ */
+ mapped_ratio = (sc->nr_mapped * 100) / total_memory;
+
+ /*
+ * Now decide how much we really want to unmap some pages. The
+ * mapped ratio is downgraded - just because there's a lot of
+ * mapped memory doesn't necessarily mean that page reclaim
+ * isn't succeeding.
+ *
+ * The distress ratio is important - we don't want to start
+ * going oom.
+ *
+ * A 100% value of vm_swappiness overrides this algorithm
+ * altogether.
+ */
+ swap_tendency = mapped_ratio / 2 + distress + vm_swappiness;
+
+ /*
+ * Now use this metric to decide whether to start moving mapped
+ * memory onto the inactive list.
+ */
+ if (swap_tendency >= 100)
+ reclaim_mapped = 1;
+ }
lru_add_drain();
spin_lock_irq(&zone->lru_lock);
zone->nr_active -= pgmoved;
spin_unlock_irq(&zone->lru_lock);
- /*
- * `distress' is a measure of how much trouble we're having reclaiming
- * pages. 0 -> no problems. 100 -> great trouble.
- */
- distress = 100 >> zone->prev_priority;
-
- /*
- * The point of this algorithm is to decide when to start reclaiming
- * mapped memory instead of just pagecache. Work out how much memory
- * is mapped.
- */
- mapped_ratio = (sc->nr_mapped * 100) / total_memory;
-
- /*
- * Now decide how much we really want to unmap some pages. The mapped
- * ratio is downgraded - just because there's a lot of mapped memory
- * doesn't necessarily mean that page reclaim isn't succeeding.
- *
- * The distress ratio is important - we don't want to start going oom.
- *
- * A 100% value of vm_swappiness overrides this algorithm altogether.
- */
- swap_tendency = mapped_ratio / 2 + distress + vm_swappiness;
-
- /*
- * Now use this metric to decide whether to start moving mapped memory
- * onto the inactive list.
- */
- if (swap_tendency >= 100)
- reclaim_mapped = 1;
-
while (!list_empty(&l_hold)) {
cond_resched();
page = lru_to_page(&l_hold);
sc.nr_reclaimed = 0;
sc.priority = priority;
sc.swap_cluster_max = nr_pages? nr_pages : SWAP_CLUSTER_MAX;
- atomic_inc(&zone->reclaim_in_progress);
shrink_zone(zone, &sc);
- atomic_dec(&zone->reclaim_in_progress);
reclaim_state->reclaimed_slab = 0;
nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL,
lru_pages);
*/
int zone_reclaim_mode __read_mostly;
+#define RECLAIM_OFF 0
+#define RECLAIM_ZONE (1<<0) /* Run shrink_cache on the zone */
+#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */
+#define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */
+#define RECLAIM_SLAB (1<<3) /* Do a global slab shrink if the zone is out of memory */
+
/*
* Mininum time between zone reclaim scans
*/
-#define ZONE_RECLAIM_INTERVAL 30*HZ
+int zone_reclaim_interval __read_mostly = 30*HZ;
+
+/*
+ * Priority for ZONE_RECLAIM. This determines the fraction of pages
+ * of a node considered for each zone_reclaim. 4 scans 1/16th of
+ * a zone.
+ */
+#define ZONE_RECLAIM_PRIORITY 4
+
/*
* Try to free up some pages from this zone through reclaim.
*/
int node_id;
if (time_before(jiffies,
- zone->last_unsuccessful_zone_reclaim + ZONE_RECLAIM_INTERVAL))
+ zone->last_unsuccessful_zone_reclaim + zone_reclaim_interval))
return 0;
if (!(gfp_mask & __GFP_WAIT) ||
if (!cpus_empty(mask) && node_id != numa_node_id())
return 0;
- sc.may_writepage = 0;
- sc.may_swap = 0;
+ sc.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE);
+ sc.may_swap = !!(zone_reclaim_mode & RECLAIM_SWAP);
sc.nr_scanned = 0;
sc.nr_reclaimed = 0;
- sc.priority = 0;
+ sc.priority = ZONE_RECLAIM_PRIORITY + 1;
sc.nr_mapped = read_page_state(nr_mapped);
sc.gfp_mask = gfp_mask;
sc.swap_cluster_max = SWAP_CLUSTER_MAX;
cond_resched();
- p->flags |= PF_MEMALLOC;
+ /*
+ * We need to be able to allocate from the reserves for RECLAIM_SWAP
+ * and we also need to be able to write out pages for RECLAIM_WRITE
+ * and RECLAIM_SWAP.
+ */
+ p->flags |= PF_MEMALLOC | PF_SWAPWRITE;
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
- shrink_zone(zone, &sc);
+ /*
+ * Free memory by calling shrink zone with increasing priorities
+ * until we have enough memory freed.
+ */
+ do {
+ sc.priority--;
+ shrink_zone(zone, &sc);
+
+ } while (sc.nr_reclaimed < nr_pages && sc.priority > 0);
+
+ if (sc.nr_reclaimed < nr_pages && (zone_reclaim_mode & RECLAIM_SLAB)) {
+ /*
+ * shrink_slab does not currently allow us to determine
+ * how many pages were freed in the zone. So we just
+ * shake the slab and then go offnode for a single allocation.
+ *
+ * shrink_slab will free memory on all zones and may take
+ * a long time.
+ */
+ shrink_slab(sc.nr_scanned, gfp_mask, order);
+ }
p->reclaim_state = NULL;
- current->flags &= ~PF_MEMALLOC;
+ current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE);
if (sc.nr_reclaimed == 0)
zone->last_unsuccessful_zone_reclaim = jiffies;
projects / linux-2.6-omap-h63xx.git / blobdiff