/******************************************************************************
- Copyright(c) 2004 Intel Corporation. All rights reserved.
+ Copyright(c) 2004-2005 Intel Corporation. All rights reserved.
Portions of this file are based on the WEP enablement code provided by the
Host AP project hostap-drivers v0.1.3
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
-#include <linux/wireless.h>
-#include <linux/version.h>
+
#include <linux/kmod.h>
#include <linux/module.h>
+#include <linux/jiffies.h>
#include <net/ieee80211.h>
+#include <linux/wireless.h>
+
static const char *ieee80211_modes[] = {
"?", "a", "b", "ab", "g", "ag", "bg", "abg"
};
#define MAX_CUSTOM_LEN 64
static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee,
- char *start, char *stop,
+ char *start, char *stop,
struct ieee80211_network *network)
{
char custom[MAX_CUSTOM_LEN];
iwe.u.data.length = sizeof("<hidden>");
start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
} else {
- iwe.u.data.length = min(network->ssid_len, (u8)32);
+ iwe.u.data.length = min(network->ssid_len, (u8) 32);
start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
}
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
- snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
+ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s",
+ ieee80211_modes[network->mode]);
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN);
- /* Add mode */
- iwe.cmd = SIOCGIWMODE;
- if (network->capability &
- (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ if (network->capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
if (network->capability & WLAN_CAPABILITY_ESS)
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
- start = iwe_stream_add_event(start, stop, &iwe,
- IW_EV_UINT_LEN);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN);
}
- /* Add frequency/channel */
+ /* Add frequency/channel */
iwe.cmd = SIOCGIWFREQ;
/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
iwe.u.freq.e = 3; */
max_rate = 0;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
- for (i = 0, j = 0; i < network->rates_len; ) {
+ for (i = 0, j = 0; i < network->rates_len;) {
if (j < network->rates_ex_len &&
((network->rates_ex[j] & 0x7F) <
(network->rates[i] & 0x7F)))
iwe.cmd = SIOCGIWRATE;
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = max_rate * 500000;
- start = iwe_stream_add_event(start, stop, &iwe,
- IW_EV_PARAM_LEN);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_PARAM_LEN);
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = p - custom;
start = iwe_stream_add_point(start, stop, &iwe, custom);
/* Add quality statistics */
- /* TODO: Fix these values... */
iwe.cmd = IWEVQUAL;
- iwe.u.qual.qual = network->stats.signal;
- iwe.u.qual.level = network->stats.rssi;
- iwe.u.qual.noise = network->stats.noise;
- iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
- if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
- iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
- if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
+ iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
+ IW_QUAL_NOISE_UPDATED;
+
+ if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) {
+ iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID |
+ IW_QUAL_LEVEL_INVALID;
+ iwe.u.qual.qual = 0;
+ iwe.u.qual.level = 0;
+ } else {
+ iwe.u.qual.level = network->stats.rssi;
+ if (ieee->perfect_rssi == ieee->worst_rssi)
+ iwe.u.qual.qual = 100;
+ else
+ iwe.u.qual.qual =
+ (100 *
+ (ieee->perfect_rssi - ieee->worst_rssi) *
+ (ieee->perfect_rssi - ieee->worst_rssi) -
+ (ieee->perfect_rssi - network->stats.rssi) *
+ (15 * (ieee->perfect_rssi - ieee->worst_rssi) +
+ 62 * (ieee->perfect_rssi -
+ network->stats.rssi))) /
+ ((ieee->perfect_rssi -
+ ieee->worst_rssi) * (ieee->perfect_rssi -
+ ieee->worst_rssi));
+ if (iwe.u.qual.qual > 100)
+ iwe.u.qual.qual = 100;
+ else if (iwe.u.qual.qual < 1)
+ iwe.u.qual.qual = 0;
+ }
+
+ if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) {
iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
- if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
- iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
+ iwe.u.qual.noise = 0;
+ } else {
+ iwe.u.qual.noise = network->stats.noise;
+ }
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
- if (ieee->wpa_enabled && network->wpa_ie_len){
+ if (network->wpa_ie_len) {
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
- if (ieee->wpa_enabled && network->rsn_ie_len){
+ if (network->rsn_ie_len) {
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
iwe.cmd = IWEVCUSTOM;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
- " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
+ " Last beacon: %dms ago",
+ jiffies_to_msecs(jiffies - network->last_scanned));
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
-
return start;
}
time_after(network->last_scanned + ieee->scan_age, jiffies))
ev = ipw2100_translate_scan(ieee, ev, stop, network);
else
- IEEE80211_DEBUG_SCAN(
- "Not showing network '%s ("
- MAC_FMT ")' due to age (%lums).\n",
- escape_essid(network->ssid,
- network->ssid_len),
- MAC_ARG(network->bssid),
- (jiffies - network->last_scanned) / (HZ / 100));
+ IEEE80211_DEBUG_SCAN("Not showing network '%s ("
+ MAC_FMT ")' due to age (%dms).\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ MAC_ARG(network->bssid),
+ jiffies_to_msecs(jiffies -
+ network->
+ last_scanned));
}
spin_unlock_irqrestore(&ieee->lock, flags);
- wrqu->data.length = ev - extra;
+ wrqu->data.length = ev - extra;
wrqu->data.flags = 0;
IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
};
int i, key, key_provided, len;
struct ieee80211_crypt_data **crypt;
+ int host_crypto = ieee->host_encrypt || ieee->host_decrypt;
IEEE80211_DEBUG_WX("SET_ENCODE\n");
if (ieee->crypt[i] != NULL) {
if (key_provided)
break;
- ieee80211_crypt_delayed_deinit(
- ieee, &ieee->crypt[i]);
+ ieee80211_crypt_delayed_deinit(ieee,
+ &ieee->crypt[i]);
}
}
if (i == WEP_KEYS) {
sec.enabled = 0;
+ sec.encrypt = 0;
sec.level = SEC_LEVEL_0;
- sec.flags |= SEC_ENABLED | SEC_LEVEL;
+ sec.flags |= SEC_ENABLED | SEC_LEVEL | SEC_ENCRYPT;
}
goto done;
}
-
-
sec.enabled = 1;
- sec.flags |= SEC_ENABLED;
+ sec.encrypt = 1;
+ sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
if (*crypt != NULL && (*crypt)->ops != NULL &&
strcmp((*crypt)->ops->name, "WEP") != 0) {
ieee80211_crypt_delayed_deinit(ieee, crypt);
}
- if (*crypt == NULL) {
+ if (*crypt == NULL && host_crypto) {
struct ieee80211_crypt_data *new_crypt;
/* take WEP into use */
new_crypt = NULL;
printk(KERN_WARNING "%s: could not initialize WEP: "
- "load module ieee80211_crypt_wep\n",
- dev->name);
+ "load module ieee80211_crypt_wep\n", dev->name);
return -EOPNOTSUPP;
}
*crypt = new_crypt;
key, escape_essid(sec.keys[key], len),
erq->length, len);
sec.key_sizes[key] = len;
- (*crypt)->ops->set_key(sec.keys[key], len, NULL,
- (*crypt)->priv);
+ if (*crypt)
+ (*crypt)->ops->set_key(sec.keys[key], len, NULL,
+ (*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
* explicitely set */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
+
} else {
- len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
- NULL, (*crypt)->priv);
- if (len == 0) {
- /* Set a default key of all 0 */
- IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
- key);
- memset(sec.keys[key], 0, 13);
- (*crypt)->ops->set_key(sec.keys[key], 13, NULL,
- (*crypt)->priv);
- sec.key_sizes[key] = 13;
- sec.flags |= (1 << key);
+ if (host_crypto) {
+ len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
+ NULL, (*crypt)->priv);
+ if (len == 0) {
+ /* Set a default key of all 0 */
+ IEEE80211_DEBUG_WX("Setting key %d to all "
+ "zero.\n", key);
+ memset(sec.keys[key], 0, 13);
+ (*crypt)->ops->set_key(sec.keys[key], 13, NULL,
+ (*crypt)->priv);
+ sec.key_sizes[key] = 13;
+ sec.flags |= (1 << key);
+ }
}
-
/* No key data - just set the default TX key index */
if (key_provided) {
- IEEE80211_DEBUG_WX(
- "Setting key %d to default Tx key.\n", key);
+ IEEE80211_DEBUG_WX("Setting key %d to default Tx "
+ "key.\n", key);
ieee->tx_keyidx = key;
sec.active_key = key;
sec.flags |= SEC_ACTIVE_KEY;
}
}
-
- done:
- ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
- sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
- sec.flags |= SEC_AUTH_MODE;
- IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
- "OPEN" : "SHARED KEY");
+ if (erq->flags & (IW_ENCODE_OPEN | IW_ENCODE_RESTRICTED)) {
+ ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
+ sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN :
+ WLAN_AUTH_SHARED_KEY;
+ sec.flags |= SEC_AUTH_MODE;
+ IEEE80211_DEBUG_WX("Auth: %s\n",
+ sec.auth_mode == WLAN_AUTH_OPEN ?
+ "OPEN" : "SHARED KEY");
+ }
/* For now we just support WEP, so only set that security level...
* TODO: When WPA is added this is one place that needs to change */
sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+ sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+ sec.encode_alg[key] = SEC_ALG_WEP;
+ done:
if (ieee->set_security)
ieee->set_security(dev, &sec);
struct iw_point *erq = &(wrqu->encoding);
int len, key;
struct ieee80211_crypt_data *crypt;
+ struct ieee80211_security *sec = &ieee->sec;
IEEE80211_DEBUG_WX("GET_ENCODE\n");
crypt = ieee->crypt[key];
erq->flags = key + 1;
- if (crypt == NULL || crypt->ops == NULL) {
+ if (!sec->enabled) {
erq->length = 0;
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
- if (strcmp(crypt->ops->name, "WEP") != 0) {
- /* only WEP is supported with wireless extensions, so just
- * report that encryption is used */
- erq->length = 0;
- erq->flags |= IW_ENCODE_ENABLED;
- return 0;
- }
+ len = sec->key_sizes[key];
+ memcpy(keybuf, sec->keys[key], len);
- len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
erq->length = (len >= 0 ? len : 0);
-
erq->flags |= IW_ENCODE_ENABLED;
if (ieee->open_wep)
return 0;
}
+int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct net_device *dev = ieee->dev;
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int i, idx, ret = 0;
+ int group_key = 0;
+ const char *alg, *module;
+ struct ieee80211_crypto_ops *ops;
+ struct ieee80211_crypt_data **crypt;
+
+ struct ieee80211_security sec = {
+ .flags = 0,
+ };
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = ieee->tx_keyidx;
+
+ if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+ crypt = &ieee->crypt[idx];
+ group_key = 1;
+ } else {
+ /* some Cisco APs use idx>0 for unicast in dynamic WEP */
+ if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
+ return -EINVAL;
+ if (ieee->iw_mode == IW_MODE_INFRA)
+ crypt = &ieee->crypt[idx];
+ else
+ return -EINVAL;
+ }
+
+ sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
+ if ((encoding->flags & IW_ENCODE_DISABLED) ||
+ ext->alg == IW_ENCODE_ALG_NONE) {
+ if (*crypt)
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ for (i = 0; i < WEP_KEYS; i++)
+ if (ieee->crypt[i] != NULL)
+ break;
+
+ if (i == WEP_KEYS) {
+ sec.enabled = 0;
+ sec.encrypt = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_LEVEL;
+ }
+ goto done;
+ }
+
+ sec.enabled = 1;
+ sec.encrypt = 1;
+
+ if (group_key ? !ieee->host_mc_decrypt :
+ !(ieee->host_encrypt || ieee->host_decrypt ||
+ ieee->host_encrypt_msdu))
+ goto skip_host_crypt;
+
+ switch (ext->alg) {
+ case IW_ENCODE_ALG_WEP:
+ alg = "WEP";
+ module = "ieee80211_crypt_wep";
+ break;
+ case IW_ENCODE_ALG_TKIP:
+ alg = "TKIP";
+ module = "ieee80211_crypt_tkip";
+ break;
+ case IW_ENCODE_ALG_CCMP:
+ alg = "CCMP";
+ module = "ieee80211_crypt_ccmp";
+ break;
+ default:
+ IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ dev->name, ext->alg);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ ops = ieee80211_get_crypto_ops(alg);
+ if (ops == NULL) {
+ request_module(module);
+ ops = ieee80211_get_crypto_ops(alg);
+ }
+ if (ops == NULL) {
+ IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ dev->name, ext->alg);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (*crypt == NULL || (*crypt)->ops != ops) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ new_crypt = (struct ieee80211_crypt_data *)
+ kmalloc(sizeof(*new_crypt), GFP_KERNEL);
+ if (new_crypt == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+ new_crypt->ops = ops;
+ if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ new_crypt->priv = new_crypt->ops->init(idx);
+ if (new_crypt->priv == NULL) {
+ kfree(new_crypt);
+ ret = -EINVAL;
+ goto done;
+ }
+ *crypt = new_crypt;
+ }
+
+ if (ext->key_len > 0 && (*crypt)->ops->set_key &&
+ (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
+ (*crypt)->priv) < 0) {
+ IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ skip_host_crypt:
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ ieee->tx_keyidx = idx;
+ sec.active_key = idx;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+
+ if (ext->alg != IW_ENCODE_ALG_NONE) {
+ memcpy(sec.keys[idx], ext->key, ext->key_len);
+ sec.key_sizes[idx] = ext->key_len;
+ sec.flags |= (1 << idx);
+ if (ext->alg == IW_ENCODE_ALG_WEP) {
+ sec.encode_alg[idx] = SEC_ALG_WEP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1;
+ } else if (ext->alg == IW_ENCODE_ALG_TKIP) {
+ sec.encode_alg[idx] = SEC_ALG_TKIP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_2;
+ } else if (ext->alg == IW_ENCODE_ALG_CCMP) {
+ sec.encode_alg[idx] = SEC_ALG_CCMP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_3;
+ }
+ /* Don't set sec level for group keys. */
+ if (group_key)
+ sec.flags &= ~SEC_LEVEL;
+ }
+ done:
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+
+ /*
+ * Do not reset port if card is in Managed mode since resetting will
+ * generate new IEEE 802.11 authentication which may end up in looping
+ * with IEEE 802.1X. If your hardware requires a reset after WEP
+ * configuration (for example... Prism2), implement the reset_port in
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
+ if (ieee->reset_on_keychange &&
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port && ieee->reset_port(dev)) {
+ IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ struct ieee80211_security *sec = &ieee->sec;
+ int idx, max_key_len;
+
+ max_key_len = encoding->length - sizeof(*ext);
+ if (max_key_len < 0)
+ return -EINVAL;
+
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = ieee->tx_keyidx;
+
+ if (!ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY &&
+ ext->alg != IW_ENCODE_ALG_WEP)
+ if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA)
+ return -EINVAL;
+
+ encoding->flags = idx + 1;
+ memset(ext, 0, sizeof(*ext));
+
+ if (!sec->enabled) {
+ ext->alg = IW_ENCODE_ALG_NONE;
+ ext->key_len = 0;
+ encoding->flags |= IW_ENCODE_DISABLED;
+ } else {
+ if (sec->encode_alg[idx] == SEC_ALG_WEP)
+ ext->alg = IW_ENCODE_ALG_WEP;
+ else if (sec->encode_alg[idx] == SEC_ALG_TKIP)
+ ext->alg = IW_ENCODE_ALG_TKIP;
+ else if (sec->encode_alg[idx] == SEC_ALG_CCMP)
+ ext->alg = IW_ENCODE_ALG_CCMP;
+ else
+ return -EINVAL;
+
+ ext->key_len = sec->key_sizes[idx];
+ memcpy(ext->key, sec->keys[idx], ext->key_len);
+ encoding->flags |= IW_ENCODE_ENABLED;
+ if (ext->key_len &&
+ (ext->alg == IW_ENCODE_ALG_TKIP ||
+ ext->alg == IW_ENCODE_ALG_CCMP))
+ ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID;
+
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(ieee80211_wx_set_encodeext);
+EXPORT_SYMBOL(ieee80211_wx_get_encodeext);
+
EXPORT_SYMBOL(ieee80211_wx_get_scan);
EXPORT_SYMBOL(ieee80211_wx_set_encode);
EXPORT_SYMBOL(ieee80211_wx_get_encode);
projects / linux-2.6-omap-h63xx.git / blobdiff