mod_timer(&ifsta->timer, jiffies + IEEE80211_AUTH_TIMEOUT);
}
+static int ieee80211_compatible_rates(struct ieee80211_sta_bss *bss,
+ struct ieee80211_supported_band *sband,
+ u64 *rates)
+{
+ int i, j, count;
+ *rates = 0;
+ count = 0;
+ for (i = 0; i < bss->supp_rates_len; i++) {
+ int rate = (bss->supp_rates[i] & 0x7F) * 5;
+
+ for (j = 0; j < sband->n_bitrates; j++)
+ if (sband->bitrates[j].bitrate == rate) {
+ *rates |= BIT(j);
+ count++;
+ break;
+ }
+ }
+
+ return count;
+}
static void ieee80211_send_assoc(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos, *ies;
- int i, len;
+ int i, len, count, rates_len, supp_rates_len;
u16 capab;
struct ieee80211_sta_bss *bss;
int wmm = 0;
struct ieee80211_supported_band *sband;
+ u64 rates = 0;
skb = dev_alloc_skb(local->hw.extra_tx_headroom +
sizeof(*mgmt) + 200 + ifsta->extra_ie_len +
if (bss->wmm_ie) {
wmm = 1;
}
+
+ /* get all rates supported by the device and the AP as
+ * some APs don't like getting a superset of their rates
+ * in the association request (e.g. D-Link DAP 1353 in
+ * b-only mode) */
+ rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+
ieee80211_rx_bss_put(dev, bss);
+ } else {
+ rates = ~0;
+ rates_len = sband->n_bitrates;
}
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
*pos++ = ifsta->ssid_len;
memcpy(pos, ifsta->ssid, ifsta->ssid_len);
+ /* add all rates which were marked to be used above */
+ supp_rates_len = rates_len;
+ if (supp_rates_len > 8)
+ supp_rates_len = 8;
+
len = sband->n_bitrates;
- if (len > 8)
- len = 8;
- pos = skb_put(skb, len + 2);
+ pos = skb_put(skb, supp_rates_len + 2);
*pos++ = WLAN_EID_SUPP_RATES;
- *pos++ = len;
- for (i = 0; i < len; i++) {
- int rate = sband->bitrates[i].bitrate;
- *pos++ = (u8) (rate / 5);
- }
+ *pos++ = supp_rates_len;
- if (sband->n_bitrates > len) {
- pos = skb_put(skb, sband->n_bitrates - len + 2);
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos++ = sband->n_bitrates - len;
- for (i = len; i < sband->n_bitrates; i++) {
+ count = 0;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (BIT(i) & rates) {
int rate = sband->bitrates[i].bitrate;
*pos++ = (u8) (rate / 5);
+ if (++count == 8)
+ break;
+ }
+ }
+
+ if (count == 8) {
+ pos = skb_put(skb, rates_len - count + 2);
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = rates_len - count;
+
+ for (i++; i < sband->n_bitrates; i++) {
+ if (BIT(i) & rates) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
}
}
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
- kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+ kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
if (!tid_agg_rx->reorder_buf) {
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
- buf_size * sizeof(struct sk_buf *));
+ buf_size * sizeof(struct sk_buff *));
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
* only one argument, and both sta_info and TID are needed, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
- u16 tid = *(int *)data;
+ u16 tid = *(u8 *)data;
struct sta_info *temp_sta = container_of((void *)data,
struct sta_info, timer_to_tid[tid]);
void sta_rx_agg_session_timer_expired(unsigned long data)
{
/* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and verious sta_info are needed here, so init
+ * only one argument, and various sta_info are needed here, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u8 *ptid = (u8 *)data;
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
- ieee80211_rx_bss_put(dev, bss);
-
return res;
}
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
- if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
- IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
- ifsta->state = IEEE80211_AUTHENTICATE;
- ieee80211_sta_reset_auth(dev, ifsta);
- return 0;
- }
-
spin_lock_bh(&local->sta_bss_lock);
freq = local->oper_channel->center_freq;
list_for_each_entry(bss, &local->sta_bss_list, list) {
if (!(bss->capability & WLAN_CAPABILITY_ESS))
continue;
- if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
- !!sdata->default_key)
+ if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+ IEEE80211_STA_AUTO_BSSID_SEL |
+ IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+ (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+ !!sdata->default_key))
continue;
if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN], *pos;
int i;
+ int ret;
DECLARE_MAC_BUF(mac);
#if 0
*pos++ = (u8) (rate / 5);
}
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
(bss = ieee80211_rx_bss_get(dev, bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len))) {
+ int ret;
printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
" based on configured SSID\n",
dev->name, print_mac(mac, bssid));
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = bss->freq;
- iwe.u.freq.e = 6;
+ iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
+ iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
- iwe.u.freq.e = 0;
+ iwe.u.freq.m = bss->freq;
+ iwe.u.freq.e = 6;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
-
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.qual = bss->signal;
projects / linux-2.6-omap-h63xx.git / blobdiff