static int ac97_channel_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
{
- static const char *texts[] = { "2ch", "4ch", "6ch" };
- if (kcontrol->private_value)
- return ac97_enum_text_info(kcontrol, uinfo, texts, 2); /* 4ch only */
- return ac97_enum_text_info(kcontrol, uinfo, texts, 3);
+ static const char *texts[] = { "2ch", "4ch", "6ch", "8ch" };
+ return ac97_enum_text_info(kcontrol, uinfo, texts,
+ kcontrol->private_value);
}
static int ac97_channel_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned char mode = ucontrol->value.enumerated.item[0];
+ if (mode >= kcontrol->private_value)
+ return -EINVAL;
+
if (mode != ac97->channel_mode) {
ac97->channel_mode = mode;
if (ac97->build_ops->update_jacks)
.get = ac97_surround_jack_mode_get, \
.put = ac97_surround_jack_mode_put, \
}
+/* 6ch */
#define AC97_CHANNEL_MODE_CTL \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.info = ac97_channel_mode_info, \
.get = ac97_channel_mode_get, \
.put = ac97_channel_mode_put, \
+ .private_value = 3, \
}
+/* 4ch */
#define AC97_CHANNEL_MODE_4CH_CTL \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.info = ac97_channel_mode_info, \
.get = ac97_channel_mode_get, \
.put = ac97_channel_mode_put, \
- .private_value = 1, \
+ .private_value = 2, \
+ }
+/* 8ch */
+#define AC97_CHANNEL_MODE_8CH_CTL \
+ { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = "Channel Mode", \
+ .info = ac97_channel_mode_info, \
+ .get = ac97_channel_mode_get, \
+ .put = ac97_channel_mode_put, \
+ .private_value = 4, \
}
static inline int is_surround_on(struct snd_ac97 *ac97)
return !ac97->indep_surround && !is_clfe_on(ac97);
}
+static inline int alc850_is_aux_back_surround(struct snd_ac97 *ac97)
+{
+ return is_surround_on(ac97);
+}
/* The following snd_ac97_ymf753_... items added by David Shust (dshust@shustring.com) */
/* Modified for YMF743 by Keita Maehara <maehara@debian.org> */
val = ac97->regs[AC97_AD_MISC];
ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL);
+ if (ac97->spec.ad18xx.lo_as_master)
+ ucontrol->value.integer.value[0] =
+ !ucontrol->value.integer.value[0];
return 0;
}
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned short val;
- val = !ucontrol->value.integer.value[0]
- ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
+ val = !ucontrol->value.integer.value[0];
+ if (ac97->spec.ad18xx.lo_as_master)
+ val = !val;
+ val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
return snd_ac97_update_bits(ac97, AC97_AD_MISC,
AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val);
}
{
unsigned short val = 0;
/* clear LODIS if shared jack is to be used for Surround out */
- if (is_shared_linein(ac97))
+ if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97))
val |= (1 << 12);
/* clear CLDIS if shared jack is to be used for C/LFE out */
if (is_shared_micin(ac97))
static int patch_ad1888_specific(struct snd_ac97 *ac97)
{
- /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
- snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback");
- snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback");
+ if (!ac97->spec.ad18xx.lo_as_master) {
+ /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
+ snd_ac97_rename_vol_ctl(ac97, "Master Playback",
+ "Master Surround Playback");
+ snd_ac97_rename_vol_ctl(ac97, "Headphone Playback",
+ "Master Playback");
+ }
return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls));
}
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1888_build_ops;
- /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
- /* it seems that most vendors connect line-out connector to headphone out of AC'97 */
+
+ /*
+ * LO can be used as a real line-out on some devices,
+ * and we need to revert the front/surround mixer switches
+ */
+ if (ac97->subsystem_vendor == 0x1043 &&
+ ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */
+ ac97->spec.ad18xx.lo_as_master = 1;
+
+ misc = snd_ac97_read(ac97, AC97_AD_MISC);
/* AD-compatible mode */
/* Stereo mutes enabled */
- misc = snd_ac97_read(ac97, AC97_AD_MISC);
- snd_ac97_write_cache(ac97, AC97_AD_MISC, misc |
- AC97_AD198X_LOSEL |
- AC97_AD198X_HPSEL |
- AC97_AD198X_MSPLT |
- AC97_AD198X_AC97NC);
+ misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC;
+ if (!ac97->spec.ad18xx.lo_as_master)
+ /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
+ /* it seems that most vendors connect line-out connector to
+ * headphone out of AC'97
+ */
+ misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL;
+
+ snd_ac97_write_cache(ac97, AC97_AD_MISC, misc);
ac97->flags |= AC97_STEREO_MUTES;
return 0;
}
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned short val;
- if (ucontrol->value.enumerated.item[0] > 3
- || ucontrol->value.enumerated.item[0] < 0)
+ if (ucontrol->value.enumerated.item[0] > 3)
return -EINVAL;
val = ctrl2reg[ucontrol->value.enumerated.item[0]]
<< AC97_AD198X_VREF_SHIFT;
#define AC97_ALC850_JACK_SELECT 0x76
#define AC97_ALC850_MISC1 0x7a
+#define AC97_ALC850_MULTICH 0x6a
static void alc850_update_jacks(struct snd_ac97 *ac97)
{
int shared;
+ int aux_is_back_surround;
/* shared Line-In / Surround Out */
shared = is_shared_surrout(ac97);
/* MIC-IN = 1, CENTER-LFE = 5 */
snd_ac97_update_bits(ac97, AC97_ALC850_JACK_SELECT, 7 << 4,
shared ? (5<<4) : (1<<4));
+
+ aux_is_back_surround = alc850_is_aux_back_surround(ac97);
+ /* Aux is Back Surround */
+ snd_ac97_update_bits(ac97, AC97_ALC850_MULTICH, 1 << 10,
+ aux_is_back_surround ? (1<<10) : (0<<10));
}
static const struct snd_kcontrol_new snd_ac97_controls_alc850[] = {
AC97_PAGE_SINGLE("Duplicate Front", AC97_ALC650_MULTICH, 0, 1, 0, 0),
AC97_SINGLE("Mic Front Input Switch", AC97_ALC850_JACK_SELECT, 15, 1, 1),
AC97_SURROUND_JACK_MODE_CTL,
- AC97_CHANNEL_MODE_CTL,
+ AC97_CHANNEL_MODE_8CH_CTL,
};
static int patch_alc850_specific(struct snd_ac97 *ac97)
ac97->build_ops = &patch_alc850_ops;
ac97->spec.dev_flags = 0; /* for IEC958 playback route - ALC655 compatible */
+ ac97->flags |= AC97_HAS_8CH;
/* assume only page 0 for writing cache */
snd_ac97_update_bits(ac97, AC97_INT_PAGING, AC97_PAGE_MASK, AC97_PAGE_VENDOR);
spdif-in monitor off, spdif-in PCM off
center on mic off, surround on line-in off
duplicate front off
+ NB default bit 10=0 = Aux is Capture, not Back Surround
*/
snd_ac97_write_cache(ac97, AC97_ALC650_MULTICH, 1<<15);
/* SURR_OUT: on, Surr 1kOhm: on, Surr Amp: off, Front 1kOhm: off
AC97_SINGLE("Downmix Surround to Front", 0x5a, 11, 1, 0),
};
+static const char *slave_vols_vt1616[] = {
+ "Front Playback Volume",
+ "Surround Playback Volume",
+ "Center Playback Volume",
+ "LFE Playback Volume",
+ NULL
+};
+
+static const char *slave_sws_vt1616[] = {
+ "Front Playback Switch",
+ "Surround Playback Switch",
+ "Center Playback Switch",
+ "LFE Playback Switch",
+ NULL
+};
+
+/* find a mixer control element with the given name */
+static struct snd_kcontrol *snd_ac97_find_mixer_ctl(struct snd_ac97 *ac97,
+ const char *name)
+{
+ struct snd_ctl_elem_id id;
+ memset(&id, 0, sizeof(id));
+ id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ strcpy(id.name, name);
+ return snd_ctl_find_id(ac97->bus->card, &id);
+}
+
+/* create a virtual master control and add slaves */
+int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name,
+ const unsigned int *tlv, const char **slaves)
+{
+ struct snd_kcontrol *kctl;
+ const char **s;
+ int err;
+
+ kctl = snd_ctl_make_virtual_master(name, tlv);
+ if (!kctl)
+ return -ENOMEM;
+ err = snd_ctl_add(ac97->bus->card, kctl);
+ if (err < 0)
+ return err;
+
+ for (s = slaves; *s; s++) {
+ struct snd_kcontrol *sctl;
+
+ sctl = snd_ac97_find_mixer_ctl(ac97, *s);
+ if (!sctl) {
+ snd_printdd("Cannot find slave %s, skipped\n", *s);
+ continue;
+ }
+ err = snd_ctl_add_slave(kctl, sctl);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
static int patch_vt1616_specific(struct snd_ac97 * ac97)
{
+ struct snd_kcontrol *kctl;
int err;
if (snd_ac97_try_bit(ac97, 0x5a, 9))
return err;
if ((err = patch_build_controls(ac97, &snd_ac97_controls_vt1616[1], ARRAY_SIZE(snd_ac97_controls_vt1616) - 1)) < 0)
return err;
+
+ /* There is already a misnamed master switch. Rename it. */
+ kctl = snd_ac97_find_mixer_ctl(ac97, "Master Playback Volume");
+ if (!kctl)
+ return -EINVAL;
+
+ snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Front Playback");
+
+ err = snd_ac97_add_vmaster(ac97, "Master Playback Volume",
+ kctl->tlv.p, slave_vols_vt1616);
+ if (err < 0)
+ return err;
+
+ err = snd_ac97_add_vmaster(ac97, "Master Playback Switch",
+ NULL, slave_sws_vt1616);
+ if (err < 0)
+ return err;
+
return 0;
}
int patch_vt1617a(struct snd_ac97 * ac97)
{
int err = 0;
+ int val;
/* we choose to not fail out at this point, but we tell the
caller when we return */
/* bring analog power consumption to normal by turning off the
* headphone amplifier, like WinXP driver for EPIA SP
*/
- snd_ac97_write_cache(ac97, 0x5c, 0x20);
+ /* We need to check the bit before writing it.
+ * On some (many?) hardwares, setting bit actually clears it!
+ */
+ val = snd_ac97_read(ac97, 0x5c);
+ if (!(val & 0x20))
+ snd_ac97_write_cache(ac97, 0x5c, 0x20);
+
ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
ac97->build_ops = &patch_vt1616_ops;
projects / linux-2.6-omap-h63xx.git / blobdiff