]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - sound/pci/ca0106/ca0106.h
Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-mmc.git
[linux-2.6-omap-h63xx.git] / sound / pci / ca0106 / ca0106.h
index deb028851056bd85fad5f8171cf405987e88776f..da09cab405a92748904bd925aba7662b488fc7a7 100644 (file)
@@ -1,7 +1,7 @@
 /*
  *  Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
  *  Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
- *  Version: 0.0.20
+ *  Version: 0.0.21
  *
  *  FEATURES currently supported:
  *    See ca0106_main.c for features.
@@ -45,6 +45,8 @@
  *    Added I2C and SPI registers. Filled in interrupt enable.
  *  0.0.20
  *    Added GPIO info for SB Live 24bit.
+ *  0.0.21
+ *   Implement support for Line-in capture on SB Live 24bit.
  *
  *
  *  This code was initally based on code from ALSA's emu10k1x.c which is:
                                                 * bit 9 0 = Mute / 1 = Analog out.
                                                 * bit 10 0 = Line-in / 1 = Mic-in.
                                                 * bit 11 0 = ? / 1 = ?
-                                                * bit 12 0 = ? / 1 = ?
+                                                * bit 12 0 = 48 Khz / 1 = 96 Khz Analog out on SB Live 24bit.
                                                 * bit 13 0 = ? / 1 = ?
                                                 * bit 14 0 = Mute / 1 = Analog out
                                                 * bit 15 0 = ? / 1 = ?
                                                /* Causes interrupts based on timer intervals. */
 #define SPI                    0x7a            /* SPI: Serial Interface Register */
 #define I2C_A                  0x7b            /* I2C Address. 32 bit */
-#define I2C_0                  0x7c            /* I2C Data Port 0. 32 bit */
-#define I2C_1                  0x7d            /* I2C Data Port 1. 32 bit */
+#define I2C_D0                 0x7c            /* I2C Data Port 0. 32 bit */
+#define I2C_D1                 0x7d            /* I2C Data Port 1. 32 bit */
+//I2C values
+#define I2C_A_ADC_ADD_MASK     0x000000fe      //The address is a 7 bit address
+#define I2C_A_ADC_RW_MASK      0x00000001      //bit mask for R/W
+#define I2C_A_ADC_TRANS_MASK   0x00000010      //Bit mask for I2c address DAC value
+#define I2C_A_ADC_ABORT_MASK   0x00000020      //Bit mask for I2C transaction abort flag
+#define I2C_A_ADC_LAST_MASK    0x00000040      //Bit mask for Last word transaction
+#define I2C_A_ADC_BYTE_MASK    0x00000080      //Bit mask for Byte Mode
 
+#define I2C_A_ADC_ADD          0x00000034      //This is the Device address for ADC 
+#define I2C_A_ADC_READ         0x00000001      //To perform a read operation
+#define I2C_A_ADC_START                0x00000100      //Start I2C transaction
+#define I2C_A_ADC_ABORT                0x00000200      //I2C transaction abort
+#define I2C_A_ADC_LAST         0x00000400      //I2C last transaction
+#define I2C_A_ADC_BYTE         0x00000800      //I2C one byte mode
+
+#define I2C_D_ADC_REG_MASK     0xfe000000      //ADC address register 
+#define I2C_D_ADC_DAT_MASK     0x01ff0000      //ADC data register
+
+#define ADC_TIMEOUT            0x00000007      //ADC Timeout Clock Disable
+#define ADC_IFC_CTRL           0x0000000b      //ADC Interface Control
+#define ADC_MASTER             0x0000000c      //ADC Master Mode Control
+#define ADC_POWER              0x0000000d      //ADC PowerDown Control
+#define ADC_ATTEN_ADCL         0x0000000e      //ADC Attenuation ADCL
+#define ADC_ATTEN_ADCR         0x0000000f      //ADC Attenuation ADCR
+#define ADC_ALC_CTRL1          0x00000010      //ADC ALC Control 1
+#define ADC_ALC_CTRL2          0x00000011      //ADC ALC Control 2
+#define ADC_ALC_CTRL3          0x00000012      //ADC ALC Control 3
+#define ADC_NOISE_CTRL         0x00000013      //ADC Noise Gate Control
+#define ADC_LIMIT_CTRL         0x00000014      //ADC Limiter Control
+#define ADC_MUX                        0x00000015      //ADC Mux offset
+
+#if 0
+/* FIXME: Not tested yet. */
+#define ADC_GAIN_MASK          0x000000ff      //Mask for ADC Gain
+#define ADC_ZERODB             0x000000cf      //Value to set ADC to 0dB
+#define ADC_MUTE_MASK          0x000000c0      //Mask for ADC mute
+#define ADC_MUTE               0x000000c0      //Value to mute ADC
+#define ADC_OSR                        0x00000008      //Mask for ADC oversample rate select
+#define ADC_TIMEOUT_DISABLE    0x00000008      //Value and mask to disable Timeout clock
+#define ADC_HPF_DISABLE                0x00000100      //Value and mask to disable High pass filter
+#define ADC_TRANWIN_MASK       0x00000070      //Mask for Length of Transient Window
+#endif
+
+#define ADC_MUX_MASK           0x0000000f      //Mask for ADC Mux
+#define ADC_MUX_MIC            0x00000002      //Value to select Mic at ADC Mux
+#define ADC_MUX_LINEIN         0x00000004      //Value to select LineIn at ADC Mux
+#define ADC_MUX_PHONE          0x00000001      //Value to select TAD at ADC Mux (Not used)
+#define ADC_MUX_AUX            0x00000008      //Value to select Aux at ADC Mux
 
 #define SET_CHANNEL 0  /* Testing channel outputs 0=Front, 1=Center/LFE, 2=Unknown, 3=Rear */
 #define PCM_FRONT_CHANNEL 0
@@ -508,9 +557,18 @@ struct snd_ca0106_pcm {
        unsigned short running;
 };
 
+typedef struct {
+        u32 serial;
+        char * name;
+        int ac97;
+       int gpio_type;
+       int i2c_adc;
+} ca0106_details_t;
+
 // definition of the chip-specific record
 struct snd_ca0106 {
        snd_card_t *card;
+       ca0106_details_t *details;
        struct pci_dev *pci;
 
        unsigned long port;
@@ -531,6 +589,7 @@ struct snd_ca0106 {
        u32 spdif_bits[4];             /* s/pdif out setup */
        int spdif_enable;
        int capture_source;
+       int capture_mic_line_in;
 
        struct snd_dma_buffer buffer;
 };
@@ -547,3 +606,6 @@ void snd_ca0106_ptr_write(ca0106_t *emu,
                                   unsigned int chn, 
                                   unsigned int data);
 
+int snd_ca0106_i2c_write(ca0106_t *emu, u32 reg, u32 value);
+
+