#include <linux/usb.h>
#include <linux/input.h>
#include <linux/spinlock.h>
-#include <sound/driver.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <sound/rawmidi.h>
+#include <sound/control.h>
#include "caiaq-device.h"
#include "caiaq-audio.h"
#include "caiaq-midi.h"
+#include "caiaq-control.h"
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
#include "caiaq-input.h"
#endif
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.2.0");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.2");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
"{Native Instruments, Kore Controller},"
+ "{Native Instruments, Kore Controller 2},"
"{Native Instruments, Audio Kontrol 1}"
"{Native Instruments, Audio 8 DJ}}");
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_KORECONTROLLER
},
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_KORECONTROLLER2
+ },
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
case EP1_CMD_MIDI_READ:
snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]);
break;
-
+ case EP1_CMD_READ_IO:
+ if (dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) {
+ if (urb->actual_length > sizeof(dev->control_state))
+ urb->actual_length = sizeof(dev->control_state);
+ memcpy(dev->control_state, buf + 1, urb->actual_length);
+ wake_up(&dev->ep1_wait_queue);
+ break;
+ }
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
case EP1_CMD_READ_ERP:
case EP1_CMD_READ_ANALOG:
- case EP1_CMD_READ_IO:
snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length);
- break;
#endif
+ break;
}
dev->ep1_in_urb.actual_length = 0;
log("unable to submit urb. OOM!?\n");
}
-static int send_command (struct snd_usb_caiaqdev *dev,
- unsigned char command,
- const unsigned char *buffer,
- int len)
+int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
+ unsigned char command,
+ const unsigned char *buffer,
+ int len)
{
int actual_len;
struct usb_device *usb_dev = dev->chip.dev;
rate, depth, bpp);
dev->audio_parm_answer = -1;
- ret = send_command(dev, EP1_CMD_AUDIO_PARAMS, tmp, sizeof(tmp));
+ ret = snd_usb_caiaq_send_command(dev, EP1_CMD_AUDIO_PARAMS,
+ tmp, sizeof(tmp));
if (ret)
return ret;
int digital, int analog, int erp)
{
char tmp[3] = { digital, analog, erp };
- return send_command(dev, EP1_CMD_AUTO_MSG, tmp, sizeof(tmp));
+ return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
+ tmp, sizeof(tmp));
}
-static void setup_card(struct snd_usb_caiaqdev *dev)
+static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
{
int ret;
char val[4];
val[0] = 0x00;
val[1] = 0x00;
val[2] = 0x01;
- send_command(dev, EP1_CMD_WRITE_IO, val, 3);
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
/* RigKontrol2 - display two centered dashes ('--') */
val[1] = 0x40;
val[2] = 0x40;
val[3] = 0x00;
- send_command(dev, EP1_CMD_WRITE_IO, val, 4);
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
/* Audio Kontrol 1 - make USB-LED stop blinking */
val[0] = 0x00;
- send_command(dev, EP1_CMD_WRITE_IO, val, 1);
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+ /* Audio 8 DJ - trigger read of current settings */
+ dev->control_state[0] = 0xff;
+ snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0);
+ snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0);
+
+ if (!wait_event_timeout(dev->ep1_wait_queue,
+ dev->control_state[0] != 0xff, HZ))
+ return;
+
+ /* fix up some defaults */
+ if ((dev->control_state[1] != 2) ||
+ (dev->control_state[2] != 3) ||
+ (dev->control_state[4] != 2)) {
+ dev->control_state[1] = 2;
+ dev->control_state[2] = 3;
+ dev->control_state[4] = 2;
+ snd_usb_caiaq_send_command(dev,
+ EP1_CMD_WRITE_IO, dev->control_state, 6);
+ }
+
break;
}
- ret = snd_usb_caiaq_audio_init(dev);
- if (ret < 0)
- log("Unable to set up audio system (ret=%d)\n", ret);
+ if (dev->spec.num_analog_audio_out +
+ dev->spec.num_analog_audio_in +
+ dev->spec.num_digital_audio_out +
+ dev->spec.num_digital_audio_in > 0) {
+ ret = snd_usb_caiaq_audio_init(dev);
+ if (ret < 0)
+ log("Unable to set up audio system (ret=%d)\n", ret);
+ }
- ret = snd_usb_caiaq_midi_init(dev);
- if (ret < 0)
- log("Unable to set up MIDI system (ret=%d)\n", ret);
+ if (dev->spec.num_midi_in +
+ dev->spec.num_midi_out > 0) {
+ ret = snd_usb_caiaq_midi_init(dev);
+ if (ret < 0)
+ log("Unable to set up MIDI system (ret=%d)\n", ret);
+ }
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
ret = snd_usb_caiaq_input_init(dev);
log("snd_card_register() returned %d\n", ret);
snd_card_free(dev->chip.card);
}
+
+ ret = snd_usb_caiaq_control_init(dev);
+ if (ret < 0)
+ log("Unable to set up control system (ret=%d)\n", ret);
}
static struct snd_card* create_card(struct usb_device* usb_dev)
return card;
}
-static int init_card(struct snd_usb_caiaqdev *dev)
+static int __devinit init_card(struct snd_usb_caiaqdev *dev)
{
char *c;
struct usb_device *usb_dev = dev->chip.dev;
if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
return -EIO;
- err = send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
+ err = snd_usb_caiaq_send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
if (err)
return err;
return 0;
}
-static int snd_probe(struct usb_interface *intf,
+static int __devinit snd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret;
projects / linux-2.6-omap-h63xx.git / blobdiff