X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=drivers%2Finput%2Fmouse%2Fappletouch.c;h=079816e6b23b042bff9a883aa984ffea757ee5a6;hb=b1cd2ee3b95f1c3108c68c82342c614e58ce1f13;hp=1f41ae94f26bdf216a5f667e754b3c559831e7ed;hpb=0e2f65ee30eee2db054f7fd73f462c5da33ec963;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 1f41ae94f26..079816e6b23 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -136,12 +136,28 @@ MODULE_DEVICE_TABLE(usb, atp_table);
 #define ATP_GEYSER_MODE_REQUEST_INDEX		0
 #define ATP_GEYSER_MODE_VENDOR_VALUE		0x04
 
+/**
+ * enum atp_status_bits - status bit meanings
+ *
+ * These constants represent the meaning of the status bits.
+ * (only Geyser 3/4)
+ *
+ * @ATP_STATUS_BUTTON: The button was pressed
+ * @ATP_STATUS_BASE_UPDATE: Update of the base values (untouched pad)
+ * @ATP_STATUS_FROM_RESET: Reset previously performed
+ */
+enum atp_status_bits {
+	ATP_STATUS_BUTTON	= BIT(0),
+	ATP_STATUS_BASE_UPDATE	= BIT(2),
+	ATP_STATUS_FROM_RESET	= BIT(4),
+};
+
 /* Structure to hold all of our device specific stuff */
 struct atp {
 	char			phys[64];
 	struct usb_device	*udev;		/* usb device */
 	struct urb		*urb;		/* usb request block */
-	signed char		*data;		/* transferred data */
+	u8			*data;		/* transferred data */
 	struct input_dev	*input;		/* input dev */
 	enum atp_touchpad_type	type;		/* type of touchpad */
 	bool			open;
@@ -251,8 +267,6 @@ static void atp_reinit(struct work_struct *work)
 	int retval;
 
 	dprintk("appletouch: putting appletouch to sleep (reinit)\n");
-	dev->idlecount = 0;
-
 	atp_geyser_init(udev);
 
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -327,11 +341,14 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers)
 	input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
 }
 
-static void atp_complete(struct urb *urb)
+/* Check URB status and for correct length of data package */
+
+#define ATP_URB_STATUS_SUCCESS		0
+#define ATP_URB_STATUS_ERROR		1
+#define ATP_URB_STATUS_ERROR_FATAL	2
+
+static int atp_status_check(struct urb *urb)
 {
-	int x, y, x_z, y_z, x_f, y_f;
-	int retval, i, j;
-	int key;
 	struct atp *dev = urb->context;
 
 	switch (urb->status) {
@@ -351,11 +368,12 @@ static void atp_complete(struct urb *urb)
 		/* This urb is terminated, clean up */
 		dbg("atp_complete: urb shutting down with status: %d",
 		    urb->status);
-		return;
+		return ATP_URB_STATUS_ERROR_FATAL;
+
 	default:
 		dbg("atp_complete: nonzero urb status received: %d",
 		    urb->status);
-		goto exit;
+		return ATP_URB_STATUS_ERROR;
 	}
 
 	/* drop incomplete datasets */
@@ -363,30 +381,33 @@ static void atp_complete(struct urb *urb)
 		dprintk("appletouch: incomplete data package"
 			" (first byte: %d, length: %d).\n",
 			dev->data[0], dev->urb->actual_length);
-		goto exit;
+		return ATP_URB_STATUS_ERROR;
 	}
 
-	/* reorder the sensors values */
-	if (dev->type == ATP_GEYSER3 || dev->type == ATP_GEYSER4) {
-		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
+	return ATP_URB_STATUS_SUCCESS;
+}
 
-		/*
-		 * The values are laid out like this:
-		 * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
-		 * '-' is an unused value.
-		 */
+/*
+ * USB interrupt callback functions
+ */
 
-		/* read X values */
-		for (i = 0, j = 19; i < 20; i += 2, j += 3) {
-			dev->xy_cur[i] = dev->data[j + 1];
-			dev->xy_cur[i + 1] = dev->data[j + 2];
-		}
-		/* read Y values */
-		for (i = 0, j = 1; i < 9; i += 2, j += 3) {
-			dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
-			dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
-		}
-	} else if (dev->type == ATP_GEYSER2) {
+/* Interrupt function for older touchpads: FOUNTAIN/GEYSER1/GEYSER2 */
+
+static void atp_complete_geyser_1_2(struct urb *urb)
+{
+	int x, y, x_z, y_z, x_f, y_f;
+	int retval, i, j;
+	int key;
+	struct atp *dev = urb->context;
+	int status = atp_status_check(urb);
+
+	if (status == ATP_URB_STATUS_ERROR_FATAL)
+		return;
+	else if (status == ATP_URB_STATUS_ERROR)
+		goto exit;
+
+	/* reorder the sensors values */
+	if (dev->type == ATP_GEYSER2) {
 		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
 
 		/*
@@ -427,34 +448,40 @@ static void atp_complete(struct urb *urb)
 		/* first sample */
 		dev->valid = true;
 		dev->x_old = dev->y_old = -1;
+
+		/* Store first sample */
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 
-		if (dev->size_detect_done ||
-		    dev->type == ATP_GEYSER3) /* No 17" Macbooks (yet) */
-			goto exit;
+		/* Perform size detection, if not done already */
+		if (!dev->size_detect_done) {
+
+			/* 17" Powerbooks have extra X sensors */
+			for (i = (dev->type == ATP_GEYSER2 ? 15 : 16);
+			     i < ATP_XSENSORS; i++) {
+				if (!dev->xy_cur[i])
+					continue;
+
+				printk(KERN_INFO
+					"appletouch: 17\" model detected.\n");
+
+				if (dev->type == ATP_GEYSER2)
+					input_set_abs_params(dev->input, ABS_X,
+							     0,
+							     (20 - 1) *
+							     ATP_XFACT - 1,
+							     ATP_FUZZ, 0);
+				else
+					input_set_abs_params(dev->input, ABS_X,
+							     0,
+							     (26 - 1) *
+							     ATP_XFACT - 1,
+							     ATP_FUZZ, 0);
+				break;
+			}
 
-		/* 17" Powerbooks have extra X sensors */
-		for (i = (dev->type == ATP_GEYSER2 ? 15 : 16);
-		     i < ATP_XSENSORS; i++) {
-			if (!dev->xy_cur[i])
-				continue;
-
-			printk(KERN_INFO "appletouch: 17\" model detected.\n");
-			if (dev->type == ATP_GEYSER2)
-				input_set_abs_params(dev->input, ABS_X, 0,
-						     (20 - 1) *
-						     ATP_XFACT - 1,
-						     ATP_FUZZ, 0);
-			else
-				input_set_abs_params(dev->input, ABS_X, 0,
-						     (ATP_XSENSORS - 1) *
-						     ATP_XFACT - 1,
-						     ATP_FUZZ, 0);
-			break;
+			dev->size_detect_done = 1;
+			goto exit;
 		}
-
-		dev->size_detect_done = 1;
-		goto exit;
 	}
 
 	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
@@ -475,7 +502,118 @@ static void atp_complete(struct urb *urb)
 			      ATP_XFACT, &x_z, &x_f);
 	y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
 			      ATP_YFACT, &y_z, &y_f);
-	key = dev->data[dev->datalen - 1] & 1;
+	key = dev->data[dev->datalen - 1] & ATP_STATUS_BUTTON;
+
+	if (x && y) {
+		if (dev->x_old != -1) {
+			x = (dev->x_old * 3 + x) >> 2;
+			y = (dev->y_old * 3 + y) >> 2;
+			dev->x_old = x;
+			dev->y_old = y;
+
+			if (debug > 1)
+				printk(KERN_DEBUG "appletouch: "
+					"X: %3d Y: %3d Xz: %3d Yz: %3d\n",
+					x, y, x_z, y_z);
+
+			input_report_key(dev->input, BTN_TOUCH, 1);
+			input_report_abs(dev->input, ABS_X, x);
+			input_report_abs(dev->input, ABS_Y, y);
+			input_report_abs(dev->input, ABS_PRESSURE,
+					 min(ATP_PRESSURE, x_z + y_z));
+			atp_report_fingers(dev->input, max(x_f, y_f));
+		}
+		dev->x_old = x;
+		dev->y_old = y;
+
+	} else if (!x && !y) {
+
+		dev->x_old = dev->y_old = -1;
+		input_report_key(dev->input, BTN_TOUCH, 0);
+		input_report_abs(dev->input, ABS_PRESSURE, 0);
+		atp_report_fingers(dev->input, 0);
+
+		/* reset the accumulator on release */
+		memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
+	}
+
+	input_report_key(dev->input, BTN_LEFT, key);
+	input_sync(dev->input);
+
+ exit:
+	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+	if (retval)
+		err("atp_complete: usb_submit_urb failed with result %d",
+		    retval);
+}
+
+/* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
+
+static void atp_complete_geyser_3_4(struct urb *urb)
+{
+	int x, y, x_z, y_z, x_f, y_f;
+	int retval, i, j;
+	int key;
+	struct atp *dev = urb->context;
+	int status = atp_status_check(urb);
+
+	if (status == ATP_URB_STATUS_ERROR_FATAL)
+		return;
+	else if (status == ATP_URB_STATUS_ERROR)
+		goto exit;
+
+	/* Reorder the sensors values:
+	 *
+	 * The values are laid out like this:
+	 * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
+	 * '-' is an unused value.
+	 */
+
+	/* read X values */
+	for (i = 0, j = 19; i < 20; i += 2, j += 3) {
+		dev->xy_cur[i] = dev->data[j + 1];
+		dev->xy_cur[i + 1] = dev->data[j + 2];
+	}
+	/* read Y values */
+	for (i = 0, j = 1; i < 9; i += 2, j += 3) {
+		dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
+		dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
+	}
+
+	dbg_dump("sample", dev->xy_cur);
+
+	/* Just update the base values (i.e. touchpad in untouched state) */
+	if (dev->data[dev->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
+
+		dprintk(KERN_DEBUG "appletouch: updated base values\n");
+
+		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
+		goto exit;
+	}
+
+	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
+		/* calculate the change */
+		dev->xy_acc[i] = dev->xy_cur[i] - dev->xy_old[i];
+
+		/* this is a round-robin value, so couple with that */
+		if (dev->xy_acc[i] > 127)
+			dev->xy_acc[i] -= 256;
+
+		if (dev->xy_acc[i] < -127)
+			dev->xy_acc[i] += 256;
+
+		/* prevent down drifting */
+		if (dev->xy_acc[i] < 0)
+			dev->xy_acc[i] = 0;
+	}
+
+	dbg_dump("accumulator", dev->xy_acc);
+
+	x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
+			      ATP_XFACT, &x_z, &x_f);
+	y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
+			      ATP_YFACT, &y_z, &y_f);
+	key = dev->data[dev->datalen - 1] & ATP_STATUS_BUTTON;
 
 	if (x && y) {
 		if (dev->x_old != -1) {
@@ -514,28 +652,27 @@ static void atp_complete(struct urb *urb)
 	input_sync(dev->input);
 
 	/*
-	 * Many Geysers will continue to send packets continually after
+	 * Geysers 3/4 will continue to send packets continually after
 	 * the first touch unless reinitialised. Do so if it's been
 	 * idle for a while in order to avoid waking the kernel up
-	 * several hundred times a second. Re-initialization does not
-	 * work on Fountain touchpads.
+	 * several hundred times a second.
 	 */
-	if (dev->type != ATP_FOUNTAIN) {
-		/*
-		 * Button must not be pressed when entering suspend,
-		 * otherwise we will never release the button.
-		 */
-		if (!x && !y && !key) {
-			dev->idlecount++;
-			if (dev->idlecount == 10) {
-				dev->valid = false;
-				schedule_work(&dev->work);
-				/* Don't resubmit urb here, wait for reinit */
-				return;
-			}
-		} else
+
+	/*
+	 * Button must not be pressed when entering suspend,
+	 * otherwise we will never release the button.
+	 */
+	if (!x && !y && !key) {
+		dev->idlecount++;
+		if (dev->idlecount == 10) {
+			dev->x_old = dev->y_old = -1;
 			dev->idlecount = 0;
-	}
+			schedule_work(&dev->work);
+			/* Don't resubmit urb here, wait for reinit */
+			return;
+		}
+	} else
+		dev->idlecount = 0;
 
  exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -632,9 +769,19 @@ static int atp_probe(struct usb_interface *iface,
 	if (!dev->data)
 		goto err_free_urb;
 
-	usb_fill_int_urb(dev->urb, udev,
-			 usb_rcvintpipe(udev, int_in_endpointAddr),
-			 dev->data, dev->datalen, atp_complete, dev, 1);
+	/* Select the USB complete (callback) function */
+	if (dev->type == ATP_FOUNTAIN ||
+	    dev->type == ATP_GEYSER1 ||
+	    dev->type == ATP_GEYSER2)
+		usb_fill_int_urb(dev->urb, udev,
+				 usb_rcvintpipe(udev, int_in_endpointAddr),
+				 dev->data, dev->datalen,
+				 atp_complete_geyser_1_2, dev, 1);
+	else
+		usb_fill_int_urb(dev->urb, udev,
+				 usb_rcvintpipe(udev, int_in_endpointAddr),
+				 dev->data, dev->datalen,
+				 atp_complete_geyser_3_4, dev, 1);
 
 	error = atp_handle_geyser(dev);
 	if (error)
@@ -751,8 +898,6 @@ static int atp_suspend(struct usb_interface *iface, pm_message_t message)
 	struct atp *dev = usb_get_intfdata(iface);
 
 	usb_kill_urb(dev->urb);
-	dev->valid = false;
-
 	return 0;
 }