X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fserial%2F8250_gsc.c;h=c5d0addfda4f9404d97ffb9f39c46b9f5e79a7c8;hb=d0ad3bc97c06fba5d37b4ca03c03b7eeeda39c47;hp=431aa5761a7a5791992a90e7c0d3d3f9731d6501;hpb=1da177e4c3f41524e886b7f1b8a0c1fc7321cac2;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa5761a7..c5d0addfda4 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -22,14 +22,12 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/io.h>
-#include <asm/serial.h> /* for LASI_BASE_BAUD */
 
 #include "8250.h"
 
 static int __init 
 serial_init_chip(struct parisc_device *dev)
 {
-	static int serial_line_nr;
 	struct uart_port port;
 	unsigned long address;
 	int err;
@@ -42,27 +40,31 @@ serial_init_chip(struct parisc_device *dev)
 		 */
 		if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
 			printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
-				"Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+				"Enable support for Wax, Lasi, Asp or Dino.\n",
+				dev->hpa.start);
 		}
 		return -ENODEV;
 	}
 
-	address = dev->hpa;
+	address = dev->hpa.start;
 	if (dev->id.sversion != 0x8d) {
 		address += 0x800;
 	}
 
-	memset(&port, 0, sizeof(struct uart_port));
-	port.mapbase = address;
-	port.irq = dev->irq;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-	port.uartclk = LASI_BASE_BAUD * 16;
-	port.dev = &dev->dev;
+	memset(&port, 0, sizeof(port));
+	port.iotype	= UPIO_MEM;
+	/* 7.272727MHz on Lasi.  Assumed the same for Dino, Wax and Timi. */
+	port.uartclk	= 7272727;
+	port.mapbase	= address;
+	port.membase	= ioremap_nocache(address, 16);
+	port.irq	= dev->irq;
+	port.flags	= UPF_BOOT_AUTOCONF;
+	port.dev	= &dev->dev;
 
 	err = serial8250_register_port(&port);
 	if (err < 0) {
 		printk(KERN_WARNING "serial8250_register_port returned error %d\n", err);
+		iounmap(port.membase);
 		return err;
 	}