X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fhwmon%2Fsmsc47b397;h=3a43b694892490b564350cff1169e26e6487d048;hb=0b8f15dcebb58ef8956203803c6de8f41a173dbc;hp=da9d80c9643286183750fd978aec69ac78e0633b;hpb=1d492eb41371d9a5145651e8eb64bea1042a4057;p=linux-2.6-omap-h63xx.git

diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c9643..3a43b694892 100644
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,8 @@ Kernel driver smsc47b397
 
 Supported chips:
   * SMSC LPC47B397-NC
+  * SMSC SCH5307-NS
+  * SMSC SCH5317
     Prefix: 'smsc47b397'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: In this file
@@ -12,11 +14,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com>
 
 November 23, 2004
 
-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip
 (for which there is no public datasheet available). This document was
 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
 by Mark M. Hoffman <mhoffman@lightlink.com>.
 
+[1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are
+otherwise compatible.
+
 * * * * *
 
 Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@@ -127,7 +132,7 @@ OUT	DX,AL
 The registers of interest for identifying the SIO on the dc7100 are Device ID
 (0x20) and Device Rev  (0x21).
 
-The Device ID will read 0X6F
+The Device ID will read 0x6F (0x81 for SCH5307-NS, and 0x85 for SCH5317)
 The Device Rev currently reads 0x01
 
 Obtaining the HWM Base Address.