X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=0122e5f810fb998225ec66784d8ea1d497e8e492;hb=b0d44c0dbbd52effb731b1c0af9afd56215c48de;hp=1a29ff3df3c58231a3c8a639758a9f9e7557ea6b;hpb=39b566eedbe9e35d38502cc5e62ef7abf1aff9c9;p=linux-2.6-omap-h63xx.git

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 1a29ff3df3c..0122e5f810f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -492,11 +492,23 @@ and is between 256 and 4096 characters. It is defined in the file
 			Range: 0 - 8192
 			Default: 64
 
+	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support
+			this option disables the debugging code at boot.
+
+	dma_debug_entries=<number>
+			This option allows to tune the number of preallocated
+			entries for DMA-API debugging code. One entry is
+			required per DMA-API allocation. Use this if the
+			DMA-API debugging code disables itself because the
+			architectural default is too low.
+
 	hpet=		[X86-32,HPET] option to control HPET usage
-			Format: { enable (default) | disable | force }
+			Format: { enable (default) | disable | force |
+				verbose }
 			disable: disable HPET and use PIT instead
 			force: allow force enabled of undocumented chips (ICH4,
 			VIA, nVidia)
+			verbose: show contents of HPET registers during setup
 
 	com20020=	[HW,NET] ARCnet - COM20020 chipset
 			Format:
@@ -830,6 +842,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hvc_iucv=	[S390] Number of z/VM IUCV hypervisor console (HVC)
 			       terminal devices. Valid values: 0..8
+	hvc_iucv_allow=	[S390] Comma-separated list of z/VM user IDs.
+			       If specified, z/VM IUCV HVC accepts connections
+			       from listed z/VM user IDs only.
 
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
@@ -1320,8 +1335,13 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	memtest=	[KNL,X86] Enable memtest
 			Format: <integer>
-			range: 0,4 : pattern number
 			default : 0 <disable>
+			Specifies the number of memtest passes to be
+			performed. Each pass selects another test
+			pattern from a given set of patterns. Memtest
+			fills the memory with this pattern, validates
+			memory contents and reserves bad memory
+			regions that are detected.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
 			See Documentation/video4linux/meye.txt.