X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=0b7351b0582cadbb44eae0fc08808d0d03ba9dd6;hb=5412b5399e095730008a14f2107331b2123733e4;hp=fa4e1239a8fa308b69c57995b575e347ca0530eb;hpb=d54b3538b0bfb31351d02d1669d4a978d2abfc5f;p=linux-2.6-omap-h63xx.git

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fa4e1239a8f..0b7351b0582 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -492,6 +492,16 @@ and is between 256 and 4096 characters. It is defined in the file
 			Range: 0 - 8192
 			Default: 64
 
+	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support
+			this option disables the debugging code at boot.
+
+	dma_debug_entries=<number>
+			This option allows to tune the number of preallocated
+			entries for DMA-API debugging code. One entry is
+			required per DMA-API allocation. Use this if the
+			DMA-API debugging code disables itself because the
+			architectural default is too low.
+
 	hpet=		[X86-32,HPET] option to control HPET usage
 			Format: { enable (default) | disable | force |
 				verbose }
@@ -607,6 +617,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	debug_objects	[KNL] Enable object debugging
 
+	no_debug_objects
+			[KNL] Disable object debugging
+
 	debugpat	[X86] Enable PAT debugging
 
 	decnet.addr=	[HW,NET]
@@ -836,6 +849,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			       If specified, z/VM IUCV HVC accepts connections
 			       from listed z/VM user IDs only.
 
+	i2c_bus=	[HW] Override the default board specific I2C bus speed
+			     or register an additional I2C bus that is not
+			     registered from board initialization code.
+			     Format:
+			     <bus_id>,<clkrate>
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from
@@ -1325,8 +1344,13 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	memtest=	[KNL,X86] Enable memtest
 			Format: <integer>
-			range: 0,4 : pattern number
 			default : 0 <disable>
+			Specifies the number of memtest passes to be
+			performed. Each pass selects another test
+			pattern from a given set of patterns. Memtest
+			fills the memory with this pattern, validates
+			memory contents and reserves bad memory
+			regions that are detected.
 
 	meye.*=		[HW] Set MotionEye Camera parameters
 			See Documentation/video4linux/meye.txt.
@@ -1502,7 +1526,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
 
-	nohlt		[BUGS=ARM,SH]
+	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
+			wfi(ARM) instruction doesn't work correctly and not to
+			use it. This is also useful when using JTAG debugger.
 
 	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
 			instruction doesn't work correctly and not to
@@ -1582,7 +1608,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
 	noswapaccount	[KNL] Disable accounting of swap in memory resource
-			controller. (See Documentation/controllers/memory.txt)
+			controller. (See Documentation/cgroups/memory.txt)
 
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
@@ -1674,6 +1700,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			See also Documentation/blockdev/paride.txt.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options:
+		earlydump	[X86] dump PCI config space before the kernel
+			        changes anything
 		off		[X86] don't probe for the PCI bus
 		bios		[X86-32] force use of PCI BIOS, don't access
 				the hardware directly. Use this if your machine
@@ -1773,6 +1801,15 @@ and is between 256 and 4096 characters. It is defined in the file
 		cbmemsize=nn[KMG]	The fixed amount of bus space which is
 				reserved for the CardBus bridge's memory
 				window. The default value is 64 megabytes.
+		resource_alignment=
+				Format:
+				[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
+				Specifies alignment and device to reassign
+				aligned memory resources.
+				If <order of align> is not specified,
+				PAGE_SIZE is used as alignment.
+				PCI-PCI bridge can be specified, if resource
+				windows need to be expanded.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -1921,7 +1958,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
-			See Documentation/cpusets.txt.
+			See Documentation/cgroups/cpusets.txt.
 
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
@@ -2019,15 +2056,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
-	selinux_compat_net =
-			[SELINUX] Set initial selinux_compat_net flag value.
-                        Format: { "0" | "1" }
-                        0 -- use new secmark-based packet controls
-                        1 -- use legacy packet controls
-                        Default value is 0 (preferred).
-                        Value can be changed at runtime via
-                        /selinux/compat_net.
-
 	serialnumber	[BUGS=X86-32]
 
 	shapers=	[NET]