X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=54f21a5c262b02ef6cb4718f72b8357693197cf3;hb=b0d44c0dbbd52effb731b1c0af9afd56215c48de;hp=b182626739ea7e7fb5c4ca98ce02b8bc76b21608;hpb=eca217b36e5d7d4377493d5cedd89105e66a5a72;p=linux-2.6-omap-h63xx.git diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b182626739e..0122e5f810f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -44,6 +44,7 @@ parameter is applicable: FB The frame buffer device is enabled. HW Appropriate hardware is enabled. IA-64 IA-64 architecture is enabled. + IMA Integrity measurement architecture is enabled. IOSCHED More than one I/O scheduler is enabled. IP_PNP IP DHCP, BOOTP, or RARP is enabled. ISAPNP ISA PnP code is enabled. @@ -114,7 +115,7 @@ In addition, the following text indicates that the option: Parameters denoted with BOOT are actually interpreted by the boot loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme -need or coordination with . +need or coordination with . There are also arch-specific kernel-parameters not documented here. See for example . @@ -134,7 +135,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi= [HW,ACPI,X86-64,i386] Advanced Configuration and Power Interface - Format: { force | off | ht | strict | noirq } + Format: { force | off | ht | strict | noirq | rsdt } force -- enable ACPI if default was off off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing @@ -491,11 +492,23 @@ and is between 256 and 4096 characters. It is defined in the file Range: 0 - 8192 Default: 64 + dma_debug=off If the kernel is compiled with DMA_API_DEBUG support + this option disables the debugging code at boot. + + dma_debug_entries= + This option allows to tune the number of preallocated + entries for DMA-API debugging code. One entry is + required per DMA-API allocation. Use this if the + DMA-API debugging code disables itself because the + architectural default is too low. + hpet= [X86-32,HPET] option to control HPET usage - Format: { enable (default) | disable | force } + Format: { enable (default) | disable | force | + verbose } disable: disable HPET and use PIT instead force: allow force enabled of undocumented chips (ICH4, VIA, nVidia) + verbose: show contents of HPET registers during setup com20020= [HW,NET] ARCnet - COM20020 chipset Format: @@ -829,6 +842,9 @@ and is between 256 and 4096 characters. It is defined in the file hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) terminal devices. Valid values: 0..8 + hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs. + If specified, z/VM IUCV HVC accepts connections + from listed z/VM user IDs only. i8042.debug [HW] Toggle i8042 debug mode i8042.direct [HW] Put keyboard port into non-translated mode @@ -868,8 +884,10 @@ and is between 256 and 4096 characters. It is defined in the file icn= [HW,ISDN] Format: [,[,[,]]] - ide= [HW] (E)IDE subsystem - Format: ide=nodma or ide=doubler + ide-core.nodma= [HW] (E)IDE subsystem + Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc + .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom + .chs .ignore_cable are additional options See Documentation/ide/ide.txt. idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed @@ -900,6 +918,15 @@ and is between 256 and 4096 characters. It is defined in the file ihash_entries= [KNL] Set number of hash buckets for inode cache. + ima_audit= [IMA] + Format: { "0" | "1" } + 0 -- integrity auditing messages. (Default) + 1 -- enable informational integrity auditing messages. + + ima_hash= [IMA] + Formt: { "sha1" | "md5" } + default: "sha1" + in2000= [HW,SCSI] See header of drivers/scsi/in2000.c. @@ -1308,8 +1335,13 @@ and is between 256 and 4096 characters. It is defined in the file memtest= [KNL,X86] Enable memtest Format: - range: 0,4 : pattern number default : 0 + Specifies the number of memtest passes to be + performed. Each pass selects another test + pattern from a given set of patterns. Memtest + fills the memory with this pattern, validates + memory contents and reserves bad memory + regions that are detected. meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. @@ -1814,11 +1846,6 @@ and is between 256 and 4096 characters. It is defined in the file autoconfiguration. Ranges are in pairs (memory base and size). - dynamic_printk Enables pr_debug()/dev_dbg() calls if - CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. - These can also be switched on/off via - /dynamic_printk/modules - print-fatal-signals= [KNL] debug: print fatal signals print-fatal-signals=1: print segfault info to @@ -2449,7 +2476,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/fb/modedb.txt. vga= [BOOT,X86-32] Select a particular video mode - See Documentation/x86/i386/boot.txt and + See Documentation/x86/boot.txt and Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is