X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=Documentation%2Fusb%2Fproc_usb_info.txt;h=fafcd47232600a1a80351fcd5dfc79492e6ce8e9;hb=eae34c67940f2a71837ed30d571b93572186d46b;hp=f86550fe38ee21afc0381a991ac4e58b07426f57;hpb=5833f1420b96c4f9b193b7f2fcbc0003dc032fe8;p=linux-2.6-omap-h63xx.git

diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index f86550fe38e..fafcd472326 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
@@ -59,7 +61,7 @@ bind to an interface (or perhaps several) using an ioctl call.  You
 would issue more ioctls to the device to communicate to it using
 control, bulk, or other kinds of USB transfers.  The IOCTLs are
 listed in the <linux/usbdevice_fs.h> file, and at this writing the
-source code (linux/drivers/usb/devio.c) is the primary reference
+source code (linux/drivers/usb/core/devio.c) is the primary reference
 for how to access devices through those files.
 
 Note that since by default these BBB/DDD files are writable only by
@@ -213,15 +215,16 @@ C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA
 
 Interface descriptor info (can be multiple per Config):
 
-I:  If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
-|   |      |      |       |             |      |       |__Driver name
-|   |      |      |       |             |      |          or "(none)"
-|   |      |      |       |             |      |__InterfaceProtocol
-|   |      |      |       |             |__InterfaceSubClass
-|   |      |      |       |__InterfaceClass
-|   |      |      |__NumberOfEndpoints
-|   |      |__AlternateSettingNumber
-|   |__InterfaceNumber
+I:* If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
+| | |      |      |       |             |      |       |__Driver name
+| | |      |      |       |             |      |          or "(none)"
+| | |      |      |       |             |      |__InterfaceProtocol
+| | |      |      |       |             |__InterfaceSubClass
+| | |      |      |       |__InterfaceClass
+| | |      |      |__NumberOfEndpoints
+| | |      |__AlternateSettingNumber
+| | |__InterfaceNumber
+| |__ "*" indicates the active altsetting (others are " ")
 |__Interface info tag
 
     A given interface may have one or more "alternate" settings.
@@ -277,7 +280,7 @@ of the USB devices on a system's root hub.  (See more below
 on how to do this.)
 
 The Interface lines can be used to determine what driver is
-being used for each device.
+being used for each device, and which altsetting it activated.
 
 The Configuration lines could be used to list maximum power
 (in milliamps) that a system's USB devices are using.