X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-at91%2FKconfig;h=0fc07b6db749ea98c7b42f87d4536e28ae2b1ad7;hb=ad48ce74f70a201c4c1cf3b4e8f6b6203a2e4a8d;hp=a31157f1655a571d42a1f95e5350de2829a5fe09;hpb=de7860c3f3272086a4c3a1b4280b11ffae7c32be;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a31157f1655..0fc07b6db74 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -7,21 +7,43 @@ choice
 
 config ARCH_AT91RM9200
 	bool "AT91RM9200"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_AT91CAP9
+	bool "AT91CAP9"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_AT91X40
+	bool "AT91x40"
 
 endchoice
 
+config AT91_PMC_UNIT
+	bool
+	default !ARCH_AT91X40
+
 # ----------------------------------------------------------
 
 if ARCH_AT91RM9200
@@ -97,6 +119,13 @@ config MACH_KAFA
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
+config MACH_ECBAT91
+	bool "emQbit ECB_AT91 SBC"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using emQbit's ECB_AT91 board.
+	  <http://wiki.emqbit.com/free-ecb-at91>
+
 endif
 
 # ----------------------------------------------------------
@@ -121,6 +150,20 @@ config MACH_AT91SAM9260EK
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
+config MACH_CAM60
+	bool "KwikByte KB9260 (CAM60) board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+	  <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+	bool "Olimex SAM9-L9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+	  <http://www.olimex.com/dev/sam9-L9260.html>
+
 endif
 
 # ----------------------------------------------------------
@@ -169,17 +212,48 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91CAP9
+
+comment "AT91CAP9 Board Type"
+
+config MACH_AT91CAP9ADK
+	bool "Atmel AT91CAP9A-DK Evaluation Kit"
+	depends on ARCH_AT91CAP9
+	help
+	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+	bool "Atmel AT91EB01 Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+	  It is also a popular target for simulators such as GDB's
+	  ARM simulator (commonly known as the ARMulator) and the
+	  Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -194,6 +268,52 @@ config AT91_PROGRAMMABLE_CLOCKS
 	  Select this if you need to program one or more of the PCK0..PCK3
 	  programmable clock outputs.
 
+config AT91_TIMER_HZ
+       int "Kernel HZ (jiffies per second)"
+       range 32 1024
+       depends on ARCH_AT91
+       default "128" if ARCH_AT91RM9200
+       default "100"
+       help
+	  On AT91rm9200 chips where you're using a system clock derived
+	  from the 32768 Hz hardware clock, this tick rate should divide
+	  it exactly: use a power-of-two value, such as 128 or 256, to
+	  reduce timing errors caused by rounding.
+
+	  On AT91sam926x chips, or otherwise when using a higher precision
+	  system clock (of at least several MHz), rounding is less of a
+	  problem so it can be safer to use a decimal values like 100.
+
+choice
+	prompt "Select a UART for early kernel messages"
+
+config AT91_EARLY_DBGU
+	bool "DBGU"
+
+config AT91_EARLY_USART0
+	bool "USART0"
+
+config AT91_EARLY_USART1
+	bool "USART1"
+
+config AT91_EARLY_USART2
+	bool "USART2"
+	depends on ! ARCH_AT91X40
+
+config AT91_EARLY_USART3
+	bool "USART3"
+	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
+
+config AT91_EARLY_USART4
+	bool "USART4"
+	depends on ARCH_AT91SAM9260
+
+config AT91_EARLY_USART5
+	bool "USART5"
+	depends on ARCH_AT91SAM9260
+
+endchoice
+
 endmenu
 
 endif