X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-at91%2Fat91sam9261_devices.c;h=37cd547855b1baa5dbd894b3942c35d5cebbd5cd;hb=11aadac4f6adc032cfd1e41c348a7a568819ed94;hp=245641263fce1cc1269d55e3b9abda85159235c5;hpb=6e5565f949af1322f8f3d3f43d044645ae448499;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 245641263fc..37cd547855b 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,7 +24,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9261.h>
 #include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -547,6 +547,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_TCB0,
+		.end	= AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_TC0,
+		.end	= AT91SAM9261_ID_TC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91SAM9261_ID_TC1,
+		.end	= AT91SAM9261_ID_TC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91SAM9261_ID_TC2,
+		.end	= AT91SAM9261_ID_TC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has a separate clock and irq for each TC channel */
+	at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
+	at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
+	at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
+	platform_device_register(&at91sam9261_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
 /* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
@@ -561,7 +610,7 @@ static struct resource rtt_resources[] = {
 
 static struct platform_device at91sam9261_rtt_device = {
 	.name		= "at91_rtt",
-	.id		= -1,
+	.id		= 0,
 	.resource	= rtt_resources,
 	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
@@ -938,49 +987,9 @@ static inline void configure_usart2_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PA16, 0);	/* CTS2 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9261_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(0);
-				at91_uarts[i] = &at91sam9261_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91sam9261_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9261_dbgu_device;
-				at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -1019,8 +1028,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1031,9 +1038,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
@@ -1050,6 +1059,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }