X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap1%2Fboard-h3.c;h=c3ef1ee5f77bcd4a01fb9a5ecac297493c850651;hb=c6b349ed8a288f1f69fdd560d509d81351cafd89;hp=0565198605656d9136a46aa45f037c98a99e18dd;hpb=c64768a7d671bcde80bca2aed93f9e07edc069c3;p=linux-2.6-omap-h63xx.git diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 05651986056..c3ef1ee5f77 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -42,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -50,7 +52,7 @@ #include #include -extern int omap_gpio_init(void); +#define H3_TS_GPIO 48 static int h3_keymap[] = { KEY(0, 0, KEY_LEFT), @@ -179,7 +181,7 @@ static struct mtd_partition nand_partitions[] = { }; /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, .parts = nand_partitions, .nr_parts = ARRAY_SIZE(nand_partitions), @@ -374,6 +376,17 @@ static struct platform_device h3_lcd_device = { .id = -1, }; +static struct spi_board_info h3_spi_board_info[] __initdata = { + [0] = { + .modalias = "tsc2101", + .bus_num = 2, + .chip_select = 0, + .irq = OMAP_GPIO_IRQ(H3_TS_GPIO), + .max_speed_hz = 16000000, + /* .platform_data = &tsc_platform_data, */ + }, +}; + static struct omap_mcbsp_reg_cfg mcbsp_regs = { .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), .spcr1 = RINTM(3) | RRST, @@ -387,18 +400,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H3 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h3_mcbsp1_device = { @@ -436,12 +449,13 @@ static struct omap_usb_config h3_usb_config __initdata = { static struct omap_mmc_config h3_mmc_config __initdata = { .mmc[0] = { - .enabled = 1, - .power_pin = -1, /* tps65010 GPIO4 */ - .switch_pin = OMAP_MPUIO(1), - }, + .enabled = 1, + .wire4 = 1, + }, }; +extern struct omap_mmc_platform_data h3_mmc_data; + static struct omap_uart_config h3_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -450,7 +464,7 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] = { +static struct omap_board_config_kernel h3_config[] __initdata = { { OMAP_TAG_USB, &h3_usb_config }, { OMAP_TAG_MMC, &h3_mmc_config }, { OMAP_TAG_UART, &h3_uart_config }, @@ -458,21 +472,28 @@ static struct omap_board_config_kernel h3_config[] = { }; static struct i2c_board_info __initdata h3_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65013", + /* .irq = OMAP_GPIO_IRQ(??), */ + }, +}; + +static struct omap_gpio_switch h3_gpio_switches[] __initdata = { { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65013", - /* .irq = OMAP_GPIO_IRQ(??), */ + .name = "mmc_slot", + .gpio = OMAP_MPUIO(1), + .type = OMAP_GPIO_SWITCH_TYPE_COVER, + .debounce_rising = 100, + .debounce_falling = 0, + .notify = h3_mmc_slot_cover_handler, + .notify_data = NULL, }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - ... - */ }; #define H3_NAND_RB_GPIO_PIN 10 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN); } @@ -500,13 +521,14 @@ static void __init h3_init(void) omap_cfg_reg(V2_1710_GPIO10); platform_add_devices(devices, ARRAY_SIZE(devices)); + spi_register_board_info(h3_spi_board_info, + ARRAY_SIZE(h3_spi_board_info)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); - - /* FIXME setup irq for tps65013 chip */ - i2c_register_board_info(1, h3_i2c_board_info, - ARRAY_SIZE(h3_i2c_board_info)); + omap_register_i2c_bus(1, 100, h3_i2c_board_info, + ARRAY_SIZE(h3_i2c_board_info)); + h3_mmc_init(); } static void __init h3_init_smc91x(void) @@ -531,23 +553,6 @@ static void __init h3_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h3_tps_init(void) -{ - if (!machine_is_omap_h3()) - return 0; - - /* gpio4 for SD, gpio3 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65013_set_low_pwr(ON); - - return 0; -} -fs_initcall(h3_tps_init); -#endif - MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .phys_io = 0xfff00000,