X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-pxa%2Fsharpsl.h;h=da4769caaf72b74a9cabe231e98081b6a1d82d37;hb=53173920dab204a31ef37e7d2cb25b964a8a7752;hp=4879c0f7da72ce733b799c03f7a50234a0a8d35b;hpb=0da36b3467040908d3df6bc1f5b4d592a8b23b63;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 4879c0f7da7..da4769caaf7 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -1,7 +1,17 @@
 /*
- * SharpSL SSP Driver
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
  */
 
+#include <asm/hardware/sharpsl_pm.h>
+
+/*
+ * SharpSL SSP Driver
+ */
 struct corgissp_machinfo {
 	int port;
 	int cs_lcdcon;
@@ -14,18 +24,18 @@ struct corgissp_machinfo {
 
 void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
 
+
 /*
  * SharpSL Backlight
  */
-
 void corgi_bl_set_intensity(int intensity);
 void spitz_bl_set_intensity(int intensity);
 void akita_bl_set_intensity(int intensity);
 
+
 /*
  * SharpSL Touchscreen Driver
  */
-
 unsigned long corgi_get_hsync_len(void);
 unsigned long spitz_get_hsync_len(void);
 void corgi_put_hsync(void);
@@ -33,89 +43,22 @@ void spitz_put_hsync(void);
 void corgi_wait_hsync(void);
 void spitz_wait_hsync(void);
 
+
 /*
  * SharpSL Battery/PM Driver
  */
 
-struct sharpsl_charger_machinfo {
-	void (*init)(void);
-	int gpio_acin;
-	int gpio_batfull;
-	int gpio_batlock;
-	int gpio_fatal;
-	int (*status_acin)(void);
-	void (*discharge)(int);
-	void (*discharge1)(int);
-	void (*charge)(int);
-	void (*chargeled)(int);
-	void (*measure_temp)(int);
-	void (*presuspend)(void);
-	void (*postsuspend)(void);
-	unsigned long (*charger_wakeup)(void);
-	int (*should_wakeup)(unsigned int resume_on_alarm);
-	int bat_levels;
-	struct battery_thresh *bat_levels_noac;
-	struct battery_thresh *bat_levels_acin;
-	int status_high_acin;
-	int status_low_acin;
-	int status_high_noac;
-	int status_low_noac;
-};
-
-struct battery_thresh {
-	int voltage;
-	int percentage;
-};
-
-struct battery_stat {
-	int ac_status;         /* APM AC Present/Not Present */
-	int mainbat_status;    /* APM Main Battery Status */
-	int mainbat_percent;   /* Main Battery Percentage Charge */
-	int mainbat_voltage;   /* Main Battery Voltage */
-};
-
-struct sharpsl_pm_status {
-	struct device *dev;
-	struct timer_list ac_timer;
-	struct timer_list chrg_full_timer;
-
-	int charge_mode;
-#define CHRG_ERROR    (-1)
-#define CHRG_OFF      (0)
-#define CHRG_ON       (1)
-#define CHRG_DONE     (2)
-
-	unsigned int flags;
-#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
-#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
-#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
-#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
-#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
 
-	int full_count;
-	unsigned long charge_start_time;
-	struct sharpsl_charger_machinfo *machinfo;
-	struct battery_stat battstat;
-};
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT   4u
+#define MAX1111_BATT_TEMP   2u
+#define MAX1111_ACIN_VOLT   6u
 
-extern struct sharpsl_pm_status sharpsl_pm;
 extern struct battery_thresh spitz_battery_levels_acin[];
 extern struct battery_thresh spitz_battery_levels_noac[];
+void sharpsl_pm_pxa_init(void);
+void sharpsl_pm_pxa_remove(void);
+int sharpsl_pm_pxa_read_max1111(int channel);
 
-#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
-
-#define SHARPSL_LED_ERROR  2
-#define SHARPSL_LED_ON     1
-#define SHARPSL_LED_OFF    0
 
-#define CHARGE_ON()         sharpsl_pm.machinfo->charge(1)
-#define CHARGE_OFF()        sharpsl_pm.machinfo->charge(0)
-#define CHARGE_LED_ON()     sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
-#define CHARGE_LED_OFF()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
-#define CHARGE_LED_ERR()    sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
-#define DISCHARGE_ON()      sharpsl_pm.machinfo->discharge(1)
-#define DISCHARGE_OFF()     sharpsl_pm.machinfo->discharge(0)
-#define STATUS_AC_IN        sharpsl_pm.machinfo->status_acin()
-#define STATUS_BATT_LOCKED  READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
-#define STATUS_CHRG_FULL    READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
-#define STATUS_FATAL        READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)