X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-pxa%2Fzylonite_pxa300.c;h=324fb9daae285300d68d3fc5bbeaf543bc6bb296;hb=e9b62693ae0a1e13ccc97a6792d9a7770c8d1b5b;hp=1832bc316501a07071dfaf08519fefb74ed3cce5;hpb=a89b7717a8c9be41a4856134b60a4d7a66df13f6;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 1832bc31650..324fb9daae2 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
 #include <asm/arch/mfp-pxa300.h>
 #include <asm/arch/zylonite.h>
 
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+#include "generic.h"
 
 /* PXA300/PXA310 common configurations */
 static mfp_cfg_t common_mfp_cfg[] __initdata = {
@@ -53,13 +53,13 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 
 	/* BTUART */
 	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD,
+	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
 	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS,
+	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
 
 	/* STUART */
 	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
+	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
 
 	/* AC97 */
 	GPIO23_AC97_nACRESET,
@@ -69,17 +69,20 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
 
+	/* WM9713 IRQ */
+	GPIO26_GPIO,
+
 	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO2_2_KP_MKIN_6,
-	GPIO3_2_KP_MKIN_7,
+	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
 	GPIO121_KP_MKOUT_0,
 	GPIO122_KP_MKOUT_1,
 	GPIO123_KP_MKOUT_2,
@@ -88,16 +91,33 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO4_2_KP_MKOUT_5,
 	GPIO5_2_KP_MKOUT_6,
 	GPIO6_2_KP_MKOUT_7,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
+	GPIO15_GPIO,	/* CMD1 default as GPIO for slot 0 */
+
+	/* MMC2 */
+	GPIO9_MMC2_DAT0,
+	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO11_MMC2_DAT2,
+	GPIO12_MMC2_DAT3,
+	GPIO13_MMC2_CLK,
+	GPIO14_MMC2_CMD,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
 	/* FFUART */
-	GPIO30_UART1_RXD,
+	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
 	GPIO31_UART1_TXD,
 	GPIO32_UART1_CTS,
 	GPIO37_UART1_RTS,
 	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR,
+	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
 	GPIO35_UART1_RI,
 	GPIO36_UART1_DTR,
 
@@ -108,7 +128,7 @@ static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
 
 static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
 	/* FFUART */
-	GPIO99_UART1_RXD,
+	GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
 	GPIO100_UART1_TXD,
 	GPIO101_UART1_CTS,
 	GPIO106_UART1_RTS,
@@ -116,6 +136,14 @@ static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
 	/* Ethernet */
 	GPIO2_nCS3,
 	GPIO102_GPIO,
+
+	/* MMC3 */
+	GPIO7_2_MMC3_DAT0,
+	GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO9_2_MMC3_DAT2,
+	GPIO10_2_MMC3_DAT3,
+	GPIO103_MMC3_CLK,
+	GPIO105_MMC3_CMD,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -174,6 +202,13 @@ void __init zylonite_pxa300_init(void)
 
 		/* GPIO pin assignment */
 		gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
+
+		/* MMC card detect & write protect for controller 0 */
+		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
+		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
+
+		/* WM9713 IRQ */
+		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 	}
 
 	if (cpu_is_pxa300()) {
@@ -184,5 +219,9 @@ void __init zylonite_pxa300_init(void)
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
 		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
+
+		/* MMC card detect & write protect for controller 2 */
+		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
+		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
 }