X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-realview%2Fcore.h;h=33dbbb41a6638b23c141fb4598c7b1a59bf0004f;hb=135cedad7457be6a96d5e151dfd48f7888a75e94;hp=2b53420f9c1b41181c82e77120acd336bcdcd823;hpb=b361735043e3001eadb1d40916fd1a4fca1a9363;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 2b53420f9c1..33dbbb41a66 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -27,8 +27,6 @@
 #include <asm/leds.h>
 #include <asm/io.h>
 
-extern struct sys_timer realview_timer;
-
 #define AMBA_DEVICE(name,busid,base,plat)			\
 static struct amba_device name##_device = {			\
 	.dev		= {					\
@@ -38,7 +36,7 @@ static struct amba_device name##_device = {			\
 	},							\
 	.res		= {					\
 		.start	= REALVIEW_##base##_BASE,		\
-		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,\
+		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,	\
 		.flags	= IORESOURCE_MEM,			\
 	},							\
 	.dma_mask	= ~0,					\
@@ -46,74 +44,24 @@ static struct amba_device name##_device = {			\
 	/* .dma		= base##_DMA,*/				\
 }
 
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
-#define GPIO2_DMA	{ 0, 0 }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
-#define GPIO3_DMA	{ 0, 0 }
-
-#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
-#define AACI_DMA	{ 0x80, 0x81 }
-#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_MMCI0B }
-#define MMCI0_DMA	{ 0x84, 0 }
-#define KMI0_IRQ	{ IRQ_KMI0, NO_IRQ }
-#define KMI0_DMA	{ 0, 0 }
-#define KMI1_IRQ	{ IRQ_KMI1, NO_IRQ }
-#define KMI1_DMA	{ 0, 0 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define SMC_DMA		{ 0, 0 }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA	{ 0, 0 }
-#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
-#define CLCD_DMA	{ 0, 0 }
-#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
-#define DMAC_DMA	{ 0, 0 }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA	{ 0, 0 }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
-#define WATCHDOG_DMA	{ 0, 0 }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
-#define GPIO0_DMA	{ 0, 0 }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
-#define GPIO1_DMA	{ 0, 0 }
-#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
-#define RTC_DMA		{ 0, 0 }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
-#define SCI_DMA		{ 7, 6 }
-#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
-#define UART0_DMA	{ 15, 14 }
-#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
-#define UART1_DMA	{ 13, 12 }
-#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
-#define UART2_DMA	{ 11, 10 }
-#define UART3_IRQ	{ IRQ_UART3, NO_IRQ }
-#define UART3_DMA	{ 0x86, 0x87 }
-#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
-#define SSP_DMA		{ 9, 8 }
-
-
 extern struct platform_device realview_flash_device;
-extern struct platform_device realview_smc91x_device;
 extern struct platform_device realview_i2c_device;
 extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clk realview_clcd_clk;
 extern struct clcd_board clcd_plat_data;
+extern void __iomem *gic_cpu_base_addr;
+#ifdef CONFIG_LOCAL_TIMERS
+extern void __iomem *twd_base_addr;
+extern unsigned int twd_size;
+#endif
+extern void __iomem *timer0_va_base;
+extern void __iomem *timer1_va_base;
+extern void __iomem *timer2_va_base;
+extern void __iomem *timer3_va_base;
 
 extern void realview_leds_event(led_event_t ledevt);
+extern void realview_timer_init(unsigned int timer_irq);
+extern int realview_flash_register(struct resource *res, u32 num);
 
 #endif