X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Farm%2Fmach-s3c2440%2Fclock.c;h=184d804934c9b3d8c4d185a95b5c28208323083a;hb=751851af7aae9b8bd5a60b3897209081fbc18b2b;hp=79e2ea4adaf36defb9b1f863c1a0444146d2a9e0;hpb=9654640d0af8f2de40ff3807d3695109d3463f54;p=linux-2.6-omap-h63xx.git

diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 79e2ea4adaf..184d804934c 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -111,14 +111,9 @@ static struct clk s3c2440_clk_ac97 = {
 
 static int s3c2440_clk_add(struct sys_device *sysdev)
 {
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
+	struct clk *clock_upll;
 	struct clk *clock_h;
 	struct clk *clock_p;
-	struct clk *clock_upll;
-
-	printk("S3C2440: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
 
 	clock_p = clk_get(NULL, "pclk");
 	clock_h = clk_get(NULL, "hclk");
@@ -129,21 +124,6 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 		return -EINVAL;
 	}
 
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		mutex_lock(&clocks_mutex);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		mutex_unlock(&clocks_mutex);
-	}
-
 	s3c2440_clk_cam.parent = clock_h;
 	s3c2440_clk_ac97.parent = clock_p;
 	s3c2440_clk_cam_upll.parent = clock_upll;