X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Fpowerpc%2Fboot%2Fdcr.h;h=95b9f5344016a619d97d413d738dc89394c28511;hb=0f1bce41fed02e45f31c2409f29e69e1fedebcdc;hp=14b44aa96feaabb42de57f51f87f3d64501488e4;hpb=99e1221d1a1edac316f7f8116c781f75733b1159;p=linux-2.6-omap-h63xx.git

diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 14b44aa96fe..95b9f534401 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -14,12 +14,20 @@
 #define DCRN_SDRAM0_CFGADDR				0x010
 #define DCRN_SDRAM0_CFGDATA				0x011
 
+#define SDRAM0_READ(offset) ({\
+	mtdcr(DCRN_SDRAM0_CFGADDR, offset); \
+	mfdcr(DCRN_SDRAM0_CFGDATA); })
+#define SDRAM0_WRITE(offset, data) ({\
+	mtdcr(DCRN_SDRAM0_CFGADDR, offset); \
+	mtdcr(DCRN_SDRAM0_CFGDATA, data); })
+
 #define 	SDRAM0_B0CR				0x40
 #define 	SDRAM0_B1CR				0x44
 #define 	SDRAM0_B2CR				0x48
 #define 	SDRAM0_B3CR				0x4c
 
-static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR };
+static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
+					    SDRAM0_B2CR, SDRAM0_B3CR };
 
 #define			SDRAM_CONFIG_BANK_ENABLE        0x00000001
 #define			SDRAM_CONFIG_SIZE_MASK          0x000e0000
@@ -121,4 +129,71 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C
 #define DCRN_CPC0_MIRQ1					0x0ed
 #define DCRN_CPC0_JTAGID				0x0ef
 
+#define DCRN_MAL0_CFG					0x180
+#define MAL_RESET 0x80000000
+
+/* 440EP Clock/Power-on Reset regs */
+#define DCRN_CPR0_ADDR	0xc
+#define DCRN_CPR0_DATA	0xd
+#define CPR0_PLLD0	0x60
+#define CPR0_OPBD0	0xc0
+#define CPR0_PERD0	0xe0
+#define CPR0_PRIMBD0	0xa0
+#define CPR0_SCPID	0x120
+#define CPR0_PLLC0	0x40
+
+/* 405GP Clocking/Power Management/Chip Control regs */
+#define DCRN_CPC0_PLLMR 0xb0
+#define DCRN_405_CPC0_CR0 0xb1
+#define DCRN_405_CPC0_CR1 0xb2
+#define DCRN_405_CPC0_PSR 0xb4
+
+/* 405EP Clocking/Power Management/Chip Control regs */
+#define DCRN_CPC0_PLLMR0  0xf0
+#define DCRN_CPC0_PLLMR1  0xf4
+#define DCRN_CPC0_UCR     0xf5
+
+/* 440GX Clock control etc */
+
+
+#define DCRN_CPR0_CLKUPD				0x020
+#define DCRN_CPR0_PLLC					0x040
+#define DCRN_CPR0_PLLD					0x060
+#define DCRN_CPR0_PRIMAD				0x080
+#define DCRN_CPR0_PRIMBD				0x0a0
+#define DCRN_CPR0_OPBD					0x0c0
+#define DCRN_CPR0_PERD					0x0e0
+#define DCRN_CPR0_MALD					0x100
+
+#define DCRN_SDR0_CONFIG_ADDR 	0xe
+#define DCRN_SDR0_CONFIG_DATA	0xf
+
+/* SDR read/write helper macros */
+#define SDR0_READ(offset) ({\
+	mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \
+	mfdcr(DCRN_SDR0_CONFIG_DATA); })
+#define SDR0_WRITE(offset, data) ({\
+	mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \
+	mtdcr(DCRN_SDR0_CONFIG_DATA, data); })
+
+#define DCRN_SDR0_UART0		0x0120
+#define DCRN_SDR0_UART1		0x0121
+#define DCRN_SDR0_UART2		0x0122
+#define DCRN_SDR0_UART3		0x0123
+
+
+/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */
+
+#define DCRN_CPR0_CFGADDR				0xc
+#define DCRN_CPR0_CFGDATA				0xd
+
+#define CPR0_READ(offset) ({\
+	mtdcr(DCRN_CPR0_CFGADDR, offset); \
+	mfdcr(DCRN_CPR0_CFGDATA); })
+#define CPR0_WRITE(offset, data) ({\
+	mtdcr(DCRN_CPR0_CFGADDR, offset); \
+	mtdcr(DCRN_CPR0_CFGDATA, data); })
+
+
+
 #endif	/* _PPC_BOOT_DCR_H_ */