X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Fpowerpc%2Fboot%2Fwrapper;h=d6c96d9ab29177513788e06ead0dddc45e8f3501;hb=92794a5d6359f9e8ed0d43fe0f3c653f748dcc90;hp=39b27e5ef6c19a840d4b2a9fc0f87d621e72d789;hpb=408af0dab78ef4145203b849d6bfd3195f6e3ec9;p=linux-2.6-omap-h63xx.git

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 39b27e5ef6c..d6c96d9ab29 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -21,6 +21,14 @@
 #		(default ./arch/powerpc/boot)
 # -W dir	specify working directory for temporary files (default .)
 
+# Stop execution if any command fails
+set -e
+
+# Allow for verbose output
+if [ "$V" = 1 ]; then
+    set -x
+fi
+
 # defaults
 kernel=
 ofile=zImage
@@ -37,6 +45,7 @@ CROSS=
 
 # directory for object and other files used by this script
 object=arch/powerpc/boot
+objbin=$object
 
 # directory for working files
 tmpdir=.
@@ -87,6 +96,7 @@ while [ "$#" -gt 0 ]; do
 	shift
 	[ "$#" -gt 0 ] || usage
 	object="$1"
+	objbin="$1"
 	;;
     -W)
 	shift
@@ -108,10 +118,13 @@ while [ "$#" -gt 0 ]; do
 done
 
 if [ -n "$dts" ]; then
+    if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
+	dts="$object/dts/$dts"
+    fi
     if [ -z "$dtb" ]; then
 	dtb="$platform.dtb"
     fi
-    dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
+    $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
 fi
 
 if [ -z "$kernel" ]; then
@@ -145,21 +158,51 @@ miboot|uboot)
 cuboot*)
     binary=y
     gzip=
+    case "$platform" in
+    *-mpc885ads|*-adder875*|*-ep88xc)
+        platformo=$object/cuboot-8xx.o
+        ;;
+    *5200*|*-motionpro)
+        platformo=$object/cuboot-52xx.o
+        ;;
+    *-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter)
+        platformo=$object/cuboot-pq2.o
+        ;;
+    *-mpc824*)
+        platformo=$object/cuboot-824x.o
+        ;;
+    *-mpc83*)
+        platformo=$object/cuboot-83xx.o
+        ;;
+    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
+        platformo=$object/cuboot-85xx-cpm2.o
+        ;;
+    *-mpc85*|*-tqm8540|*-sbc85*)
+        platformo=$object/cuboot-85xx.o
+        ;;
+    esac
     ;;
 ps3)
     platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
     lds=$object/zImage.ps3.lds
-    binary=y
     gzip=
     ext=bin
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     ;;
-ep88xc)
+ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
     binary=y
     ;;
+adder875-redboot)
+    platformo="$object/fixed-head.o $object/redboot-8xx.o"
+    binary=y
+    ;;
+simpleboot-virtex405-*)
+    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -187,10 +230,13 @@ if [ -n "$version" ]; then
     uboot_version="-n Linux-$version"
 fi
 
+# physical offset of kernel image
+membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
+
 case "$platform" in
 uboot)
     rm -f "$ofile"
-    mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
+    mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
 	$uboot_version -d "$vmz" "$ofile"
     if [ -z "$cacheit" ]; then
 	rm -f "$vmz"
@@ -233,73 +279,66 @@ entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
 
 if [ -n "$binary" ]; then
     mv "$ofile" "$ofile".elf
-    ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
+    ${CROSS}objcopy -O binary "$ofile".elf "$ofile"
 fi
 
 # post-processing needed for some platforms
 case "$platform" in
 pseries|chrp)
-    $object/addnote "$ofile"
+    $objbin/addnote "$ofile"
     ;;
 coff)
     ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
-    $object/hack-coff "$ofile"
+    $objbin/hack-coff "$ofile"
     ;;
 cuboot*)
-    gzip -f -9 "$ofile".bin
+    gzip -f -9 "$ofile"
     mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
-            $uboot_version -d "$ofile".bin.gz "$ofile"
+            $uboot_version -d "$ofile".gz "$ofile"
     ;;
 treeboot*)
     mv "$ofile" "$ofile.elf"
-    $object/mktree "$ofile.elf" "$ofile" "$base" "$entry"
+    $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
     if [ -z "$cacheit" ]; then
 	rm -f "$ofile.elf"
     fi
     exit 0
     ;;
 ps3)
-    # The ps3's loader supports loading gzipped binary images from flash
-    # rom to addr zero. The loader enters the image at addr 0x100.  A
-    # bootwrapper overlay is use to arrange for the kernel to be loaded
-    # to addr zero and to have a suitable bootwrapper entry at 0x100.
-    # To construct the rom image, 0x100 bytes from offset 0x100 in the
-    # kernel is copied to the bootwrapper symbol __system_reset_kernel.
-    # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
-    # then copied to offset 0x100.  At runtime the bootwrapper program
-    # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
-
-    system_reset_overlay=0x`${CROSS}nm "$ofile".elf \
+    # The ps3's loader supports loading a gzipped binary image from flash
+    # rom to ram addr zero. The loader then enters the system reset
+    # vector at addr 0x100.  A bootwrapper overlay is used to arrange for
+    # a binary image of the kernel to be at addr zero, and yet have a
+    # suitable bootwrapper entry at 0x100.  To construct the final rom
+    # image 512 bytes from offset 0x100 is copied to the bootwrapper
+    # place holder at symbol __system_reset_kernel.  The 512 bytes of the
+    # bootwrapper entry code at symbol __system_reset_overlay is then
+    # copied to offset 0x100.  At runtime the bootwrapper program copies
+    # the data at __system_reset_kernel back to addr 0x100.
+
+    system_reset_overlay=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_overlay$'       \
         | cut -d' ' -f1`
     system_reset_overlay=`printf "%d" $system_reset_overlay`
-    system_reset_kernel=0x`${CROSS}nm "$ofile".elf \
+    system_reset_kernel=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_kernel$'       \
         | cut -d' ' -f1`
     system_reset_kernel=`printf "%d" $system_reset_kernel`
     overlay_dest="256"
-    overlay_size="256"
-
-    rm -f "$object/otheros.bld"
+    overlay_size="512"
 
-    msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
-        skip=$overlay_dest seek=$system_reset_kernel      \
-        count=$overlay_size bs=1 2>&1)
+    ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
 
-    if [ $? -ne "0" ]; then
-       echo $msg
-       exit 1
-    fi
+    dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
+        skip=$overlay_dest seek=$system_reset_kernel  \
+        count=$overlay_size bs=1
 
-    msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
-        skip=$system_reset_overlay seek=$overlay_dest     \
-        count=$overlay_size bs=1 2>&1)
-
-    if [ $? -ne "0" ]; then
-       echo $msg
-       exit 2
-    fi
+    dd if="$ofile.bin" of="$ofile.bin" conv=notrunc   \
+        skip=$system_reset_overlay seek=$overlay_dest \
+        count=$overlay_size bs=1
 
-    gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld"
+    odir="$(dirname "$ofile.bin")"
+    rm -f "$odir/otheros.bld"
+    gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
     ;;
 esac