X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Facpi%2Fboot.c;h=eb875cdc7367c3aee3fcb285606c1e993cc808af;hb=acbaa41a780490c791492c41144c774c04875af1;hp=bfd10fd211cd30f4e0867c8bbfd8458461aec3c8;hpb=0962f402af1bb0b53ccee626785d202a10c12fff;p=linux-2.6-omap-h63xx.git

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index bfd10fd211c..eb875cdc736 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -58,7 +58,6 @@ EXPORT_SYMBOL(acpi_disabled);
 #ifdef	CONFIG_X86_64
 
 #include <asm/proto.h>
-#include <asm/genapic.h>
 
 #else				/* X86 */
 
@@ -97,8 +96,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #warning ACPI uses CMPXCHG, i486 and later hardware
 #endif
 
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
    -------------------------------------------------------------------------- */
@@ -160,6 +157,8 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
 
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
 {
 	if (!strcmp(mcfg->header.oem_id, "SGI"))
@@ -253,10 +252,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled)
 		return;
 	}
 
-#ifdef CONFIG_X86_32
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
-#endif
 
 	generic_processor_info(id, ver);
 }
@@ -775,11 +772,9 @@ static void __init acpi_register_lapic_address(unsigned long address)
 
 	set_fixmap_nocache(FIX_APIC_BASE, address);
 	if (boot_cpu_physical_apicid == -1U) {
-		boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
-#ifdef CONFIG_X86_32
+		boot_cpu_physical_apicid  = read_apic_id();
 		apic_version[boot_cpu_physical_apicid] =
 			 GET_APIC_VERSION(apic_read(APIC_LVR));
-#endif
 	}
 }
 
@@ -1351,7 +1346,9 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
+#ifdef CONFIG_X86_32
 				setup_apic_routing();
+#endif
 			}
 		}
 		if (error == -EINVAL) {
@@ -1421,8 +1418,16 @@ static int __init force_acpi_ht(const struct dmi_system_id *d)
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
-	pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
-	acpi_skip_timer_override = 1;
+	/*
+	 * The ati_ixp4x0_rev() early PCI quirk should have set
+	 * the acpi_skip_timer_override flag already:
+	 */
+	if (!acpi_skip_timer_override) {
+		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+			d->ident);
+		acpi_skip_timer_override = 1;
+	}
 	return 0;
 }
 
@@ -1603,6 +1608,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
 	 * override in that cases.
 	 */
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP nx6115 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+		     },
+	 },
 	{
 	 .callback = dmi_ignore_irq0_timer_override,
 	 .ident = "HP NX6125 laptop",
@@ -1619,6 +1632,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
 		     },
 	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP 6715b laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+		     },
+	 },
 	{}
 };