X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fkernel%2Fentry_32.S;h=b21fbfaffe391a974d10d7417a9f00c99ab05228;hb=02683ffdf655b4ae15245376ba6fea6d9e5829a6;hp=cdfd94cc6b14e4fd1c06c058904e13c2f6575810;hpb=76c3bb15d6786a0b8da0ad0090e0c9c3672fc08b;p=linux-2.6-omap-h63xx.git

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index cdfd94cc6b1..b21fbfaffe3 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -54,6 +54,16 @@
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysenter_audit	syscall_trace_entry
+#define sysexit_audit	syscall_exit_work
+#endif
+
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
@@ -333,7 +343,8 @@ sysenter_past_esp:
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
 	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz syscall_trace_entry
+	jnz sysenter_audit
+sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
 	call *sys_call_table(,%eax,4)
@@ -343,7 +354,8 @@ sysenter_past_esp:
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx
-	jne syscall_exit_work
+	jne sysexit_audit
+sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
 	movl PT_EIP(%esp), %edx
 	movl PT_OLDESP(%esp), %ecx
@@ -351,6 +363,45 @@ sysenter_past_esp:
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
 	ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	addl $4,%esp
+	CFI_ADJUST_CFA_OFFSET -4
+	/* %esi already in 8(%esp)	   6th arg: 4th syscall arg */
+	/* %edx already in 4(%esp)	   5th arg: 3rd syscall arg */
+	/* %ecx already in 0(%esp)	   4th arg: 2nd syscall arg */
+	movl %ebx,%ecx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%edx			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%eax	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	movl PT_EAX(%esp),%eax		/* reload syscall number */
+	jmp sysenter_do_call
+
+sysexit_audit:
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	movl %eax,%edx		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%eax		/* zero-extend that */
+	inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	movl PT_EAX(%esp),%eax	/* reload syscall return value */
+	jmp sysenter_exit
+#endif
+
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
@@ -679,6 +730,7 @@ error_code:
 	movl $(__USER_DS), %ecx
 	movl %ecx, %ds
 	movl %ecx, %es
+	TRACE_IRQS_OFF
 	movl %esp,%eax			# pt_regs pointer
 	call *%edi
 	jmp ret_from_exception
@@ -709,20 +761,9 @@ ENTRY(device_not_available)
 	RING0_INT_FRAME
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
-	GET_CR0_INTO_EAX
-	testl $0x4, %eax		# EM (math emulation bit)
-	jne device_not_available_emulate
-	preempt_stop(CLBR_ANY)
-	call math_state_restore
-	jmp ret_from_exception
-device_not_available_emulate:
-	pushl $0			# temporary storage for ORIG_EIP
+	pushl $do_device_not_available
 	CFI_ADJUST_CFA_OFFSET 4
-	call math_emulate
-	addl $4, %esp
-	CFI_ADJUST_CFA_OFFSET -4
-	jmp ret_from_exception
+	jmp error_code
 	CFI_ENDPROC
 END(device_not_available)
 
@@ -763,6 +804,7 @@ debug_stack_correct:
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	xorl %edx,%edx			# error code 0
 	movl %esp,%eax			# pt_regs pointer
 	call do_debug
@@ -807,6 +849,7 @@ nmi_stack_correct:
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_nmi
@@ -847,6 +890,7 @@ nmi_espfix_stack:
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	FIXUP_ESPFIX_STACK		# %eax == %esp
 	xorl %edx,%edx			# zero error code
 	call do_nmi
@@ -877,6 +921,7 @@ KPROBE_ENTRY(int3)
 	pushl $-1			# mark this as an int
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
+	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_int3
@@ -979,7 +1024,7 @@ ENTRY(machine_check)
 	RING0_INT_FRAME
 	pushl $0
 	CFI_ADJUST_CFA_OFFSET 4
-	pushl machine_check_vector
+	pushl $do_machine_check
 	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
 	CFI_ENDPROC