X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=arch%2Fx86%2Fpci%2Ffixup.c;h=3c27a809393b59051aaa794ad33b2310fd70402c;hb=be3bfbba8f7f6c8f32e8444ef895433701a3f801;hp=4bdaa590375dd302bac474145f6614924a7a6387;hpb=6679ce6e5f519096612b480d255d9ca97be0c2be;p=linux-2.6-omap-h63xx.git

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 4bdaa590375..3c27a809393 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -511,3 +511,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+
+/*
+ * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
+ * confusing the PCI engine:
+ */
+static void sb600_disable_hpet_bar(struct pci_dev *dev)
+{
+	u8 val;
+
+	/*
+	 * The SB600 and SB700 both share the same device
+	 * ID, but the PM register 0x55 does something different
+	 * for the SB700, so make sure we are dealing with the
+	 * SB600 before touching the bit:
+	 */
+
+	pci_read_config_byte(dev, 0x08, &val);
+
+	if (val < 0x2F) {
+		outb(0x55, 0xCD6);
+		val = inb(0xCD7);
+
+		/* Set bit 7 in PM register 0x55 */
+		outb(0x55, 0xCD6);
+		outb(val | 0x80, 0xCD7);
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);