X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Flibata-acpi.c;h=9330b7922f6281e758a795603d18e2550fb70da1;hb=862f76f86d64c2cf34a7ff5ddf0a175073b76534;hp=3ff8b14420d9bad5c2de548dd5edee8e730537e0;hpb=a177ba3b7a08beef3f0fe74efa0f90701891945a;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 3ff8b14420d..9330b7922f6 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -29,14 +29,16 @@
 enum {
 	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
 	ATA_ACPI_FILTER_LOCK	= 1 << 1,
+	ATA_ACPI_FILTER_DIPM	= 1 << 2,
 
 	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
-				  ATA_ACPI_FILTER_LOCK,
+				  ATA_ACPI_FILTER_LOCK |
+				  ATA_ACPI_FILTER_DIPM,
 };
 
 static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
 
 #define NO_PORT_MULT		0xffff
 #define SATA_ADR(root, pmp)	(((root) << 16) | (pmp))
@@ -195,6 +197,10 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 		/* This device does not support hotplug */
 		return;
 
+	if (event == ACPI_NOTIFY_BUS_CHECK ||
+	    event == ACPI_NOTIFY_DEVICE_CHECK)
+		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+
 	spin_lock_irqsave(ap->lock, flags);
 
 	switch (event) {
@@ -202,7 +208,6 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
 
-		status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
 		if (ACPI_FAILURE(status)) {
 			ata_port_printk(ap, KERN_ERR,
 				"acpi: failed to determine bay status (0x%x)\n",
@@ -690,6 +695,14 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
 			return 1;
 	}
 
+	if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+		/* inhibit enabling DIPM */
+		if (tf->command == ATA_CMD_SET_FEATURES &&
+		    tf->feature == SETFEATURES_SATA_ENABLE &&
+		    tf->nsect == SATA_DIPM)
+			return 1;
+	}
+
 	return 0;
 }