X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Flibata-core.c;h=1ee9499bd343717ca95252a775c01d77ef3f892f;hb=ba14a9c291aa867896a90b3571fcc1c3759942ff;hp=79e3a8e7a84a36de25dea2bcb7161b7bcdcc6fd5;hpb=e6aa0f07cb5e81a7cbeaf3be6e2101234c2f0d30;p=linux-2.6-omap-h63xx.git diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 79e3a8e7a84..8824c8da3f2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -163,6 +163,67 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +/* + * Iterator helpers. Don't use directly. + * + * LOCKING: + * Host lock or EH context. + */ +struct ata_link *__ata_port_next_link(struct ata_port *ap, + struct ata_link *link, bool dev_only) +{ + /* NULL link indicates start of iteration */ + if (!link) { + if (dev_only && sata_pmp_attached(ap)) + return ap->pmp_link; + return &ap->link; + } + + /* we just iterated over the host master link, what's next? */ + if (link == &ap->link) { + if (!sata_pmp_attached(ap)) { + if (unlikely(ap->slave_link) && !dev_only) + return ap->slave_link; + return NULL; + } + return ap->pmp_link; + } + + /* slave_link excludes PMP */ + if (unlikely(link == ap->slave_link)) + return NULL; + + /* iterate to the next PMP link */ + if (++link < ap->pmp_link + ap->nr_pmp_links) + return link; + return NULL; +} + +/** + * ata_dev_phys_link - find physical link for a device + * @dev: ATA device to look up physical link for + * + * Look up physical link which @dev is attached to. Note that + * this is different from @dev->link only when @dev is on slave + * link. For all other cases, it's the same as @dev->link. + * + * LOCKING: + * Don't care. + * + * RETURNS: + * Pointer to the found physical link. + */ +struct ata_link *ata_dev_phys_link(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + + if (!ap->slave_link) + return dev->link; + if (!dev->devno) + return &ap->link; + return ap->slave_link; +} + /** * ata_force_cbl - force cable type according to libata.force * @ap: ATA port of interest @@ -206,7 +267,8 @@ void ata_force_cbl(struct ata_port *ap) * the host link and all fan-out ports connected via PMP. If the * device part is specified as 0 (e.g. 1.00:), it specifies the * first fan-out link not the host link. Device number 15 always - * points to the host link whether PMP is attached or not. + * points to the host link whether PMP is attached or not. If the + * controller has slave link, device number 16 points to it. * * LOCKING: * EH context. @@ -214,12 +276,11 @@ void ata_force_cbl(struct ata_port *ap) static void ata_force_link_limits(struct ata_link *link) { bool did_spd = false; - int linkno, i; + int linkno = link->pmp; + int i; if (ata_is_host_link(link)) - linkno = 15; - else - linkno = link->pmp; + linkno += 15; for (i = ata_force_tbl_size - 1; i >= 0; i--) { const struct ata_force_ent *fe = &ata_force_tbl[i]; @@ -266,9 +327,9 @@ static void ata_force_xfermask(struct ata_device *dev) int alt_devno = devno; int i; - /* allow n.15 for the first device attached to host port */ - if (ata_is_host_link(dev->link) && devno == 0) - alt_devno = 15; + /* allow n.15/16 for devices attached to host port */ + if (ata_is_host_link(dev->link)) + alt_devno += 15; for (i = ata_force_tbl_size - 1; i >= 0; i--) { const struct ata_force_ent *fe = &ata_force_tbl[i]; @@ -320,9 +381,9 @@ static void ata_force_horkage(struct ata_device *dev) int alt_devno = devno; int i; - /* allow n.15 for the first device attached to host port */ - if (ata_is_host_link(dev->link) && devno == 0) - alt_devno = 15; + /* allow n.15/16 for devices attached to host port */ + if (ata_is_host_link(dev->link)) + alt_devno += 15; for (i = 0; i < ata_force_tbl_size; i++) { const struct ata_force_ent *fe = &ata_force_tbl[i]; @@ -1207,7 +1268,7 @@ u64 ata_tf_to_lba48(const struct ata_taskfile *tf) sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; - sectors |= (tf->hob_lbal & 0xff) << 24; + sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; sectors |= (tf->lbah & 0xff) << 16; sectors |= (tf->lbam & 0xff) << 8; sectors |= (tf->lbal & 0xff); @@ -1541,7 +1602,6 @@ unsigned long ata_id_xfermask(const u16 *id) /** * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled * @data: data for @fn to use * @delay: delay time in msecs for workqueue function * @@ -1652,8 +1712,6 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, else tag = 0; - if (test_and_set_bit(tag, &ap->qc_allocated)) - BUG(); qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; @@ -2681,7 +2739,7 @@ static void sata_print_link_status(struct ata_link *link) return; sata_scr_read(link, SCR_CONTROL, &scontrol); - if (ata_link_online(link)) { + if (ata_phys_link_online(link)) { tmp = (sstatus >> 4) & 0xf; ata_link_printk(link, KERN_INFO, "SATA link up %s (SStatus %X SControl %X)\n", @@ -3372,6 +3430,12 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); int warned = 0; + /* Slave readiness can't be tested separately from master. On + * M/S emulation configuration, this function should be called + * only on the master and it will handle both master and slave. + */ + WARN_ON(link == link->ap->slave_link); + if (time_after(nodev_deadline, deadline)) nodev_deadline = deadline; @@ -3593,7 +3657,7 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline) } /* no point in trying softreset on offline link */ - if (ata_link_offline(link)) + if (ata_phys_link_offline(link)) ehc->i.action &= ~ATA_EH_SOFTRESET; return 0; @@ -3671,7 +3735,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, if (rc) goto out; /* if link is offline nothing more to do */ - if (ata_link_offline(link)) + if (ata_phys_link_offline(link)) goto out; /* Link is online. From this point, -ENODEV too is an error. */ @@ -4091,29 +4155,33 @@ static int cable_is_40wire(struct ata_port *ap) struct ata_link *link; struct ata_device *dev; - /* If the controller thinks we are 40 wire, we are */ + /* If the controller thinks we are 40 wire, we are. */ if (ap->cbl == ATA_CBL_PATA40) return 1; - /* If the controller thinks we are 80 wire, we are */ + + /* If the controller thinks we are 80 wire, we are. */ if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) return 0; - /* If the system is known to be 40 wire short cable (eg laptop), - then we allow 80 wire modes even if the drive isn't sure */ + + /* If the system is known to be 40 wire short cable (eg + * laptop), then we allow 80 wire modes even if the drive + * isn't sure. + */ if (ap->cbl == ATA_CBL_PATA40_SHORT) return 0; - /* If the controller doesn't know we scan - - - Note: We look for all 40 wire detects at this point. - Any 80 wire detect is taken to be 80 wire cable - because - - In many setups only the one drive (slave if present) - will give a valid detect - - If you have a non detect capable drive you don't - want it to colour the choice - */ + + /* If the controller doesn't know, we scan. + * + * Note: We look for all 40 wire detects at this point. Any + * 80 wire detect is taken to be 80 wire cable because + * - in many setups only the one drive (slave if present) will + * give a valid detect + * - if you have a non detect capable drive you don't want it + * to colour the choice + */ ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) { - if (!ata_is_40wire(dev)) + if (ata_dev_enabled(dev) && !ata_is_40wire(dev)) return 0; } } @@ -4485,55 +4553,29 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) #endif /* __BIG_ENDIAN */ } -/** - * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) -{ - struct ata_queued_cmd *qc = NULL; - unsigned int i; - - /* no command while frozen */ - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); - break; - } - - if (qc) - qc->tag = i; - - return qc; -} - /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: command tag * * LOCKING: * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) { struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; - qc = ata_qc_new(ap); + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + qc = __ata_qc_from_tag(ap, tag); if (qc) { qc->scsicmd = NULL; qc->ap = ap; qc->dev = dev; + qc->tag = tag; ata_qc_reinit(qc); } @@ -4541,31 +4583,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) return qc; } -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_qc_free(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qc_allocated); - } -} - void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -4630,7 +4647,6 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @err_mask: ATA Status register contents * * Indicate to the mid and upper layers that an ATA * command has completed, with either an ok or not-ok status. @@ -4868,10 +4884,8 @@ int sata_scr_valid(struct ata_link *link) int sata_scr_read(struct ata_link *link, int reg, u32 *val) { if (ata_is_host_link(link)) { - struct ata_port *ap = link->ap; - if (sata_scr_valid(link)) - return ap->ops->scr_read(ap, reg, val); + return link->ap->ops->scr_read(link, reg, val); return -EOPNOTSUPP; } @@ -4897,10 +4911,8 @@ int sata_scr_read(struct ata_link *link, int reg, u32 *val) int sata_scr_write(struct ata_link *link, int reg, u32 val) { if (ata_is_host_link(link)) { - struct ata_port *ap = link->ap; - if (sata_scr_valid(link)) - return ap->ops->scr_write(ap, reg, val); + return link->ap->ops->scr_write(link, reg, val); return -EOPNOTSUPP; } @@ -4925,13 +4937,12 @@ int sata_scr_write(struct ata_link *link, int reg, u32 val) int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) { if (ata_is_host_link(link)) { - struct ata_port *ap = link->ap; int rc; if (sata_scr_valid(link)) { - rc = ap->ops->scr_write(ap, reg, val); + rc = link->ap->ops->scr_write(link, reg, val); if (rc == 0) - rc = ap->ops->scr_read(ap, reg, &val); + rc = link->ap->ops->scr_read(link, reg, &val); return rc; } return -EOPNOTSUPP; @@ -4941,7 +4952,7 @@ int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) } /** - * ata_link_online - test whether the given link is online + * ata_phys_link_online - test whether the given link is online * @link: ATA link to test * * Test whether @link is online. Note that this function returns @@ -4952,20 +4963,20 @@ int sata_scr_write_flush(struct ata_link *link, int reg, u32 val) * None. * * RETURNS: - * 1 if the port online status is available and online. + * True if the port online status is available and online. */ -int ata_link_online(struct ata_link *link) +bool ata_phys_link_online(struct ata_link *link) { u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && (sstatus & 0xf) == 0x3) - return 1; - return 0; + return true; + return false; } /** - * ata_link_offline - test whether the given link is offline + * ata_phys_link_offline - test whether the given link is offline * @link: ATA link to test * * Test whether @link is offline. Note that this function @@ -4976,16 +4987,68 @@ int ata_link_online(struct ata_link *link) * None. * * RETURNS: - * 1 if the port offline status is available and offline. + * True if the port offline status is available and offline. */ -int ata_link_offline(struct ata_link *link) +bool ata_phys_link_offline(struct ata_link *link) { u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && (sstatus & 0xf) != 0x3) - return 1; - return 0; + return true; + return false; +} + +/** + * ata_link_online - test whether the given link is online + * @link: ATA link to test + * + * Test whether @link is online. This is identical to + * ata_phys_link_online() when there's no slave link. When + * there's a slave link, this function should only be called on + * the master link and will return true if any of M/S links is + * online. + * + * LOCKING: + * None. + * + * RETURNS: + * True if the port online status is available and online. + */ +bool ata_link_online(struct ata_link *link) +{ + struct ata_link *slave = link->ap->slave_link; + + WARN_ON(link == slave); /* shouldn't be called on slave link */ + + return ata_phys_link_online(link) || + (slave && ata_phys_link_online(slave)); +} + +/** + * ata_link_offline - test whether the given link is offline + * @link: ATA link to test + * + * Test whether @link is offline. This is identical to + * ata_phys_link_offline() when there's no slave link. When + * there's a slave link, this function should only be called on + * the master link and will return true if both M/S links are + * offline. + * + * LOCKING: + * None. + * + * RETURNS: + * True if the port offline status is available and offline. + */ +bool ata_link_offline(struct ata_link *link) +{ + struct ata_link *slave = link->ap->slave_link; + + WARN_ON(link == slave); /* shouldn't be called on slave link */ + + return ata_phys_link_offline(link) && + (!slave || ata_phys_link_offline(slave)); } #ifdef CONFIG_PM @@ -5127,11 +5190,11 @@ int ata_port_start(struct ata_port *ap) */ void ata_dev_init(struct ata_device *dev) { - struct ata_link *link = dev->link; + struct ata_link *link = ata_dev_phys_link(dev); struct ata_port *ap = link->ap; unsigned long flags; - /* SATA spd limit is bound to the first device */ + /* SATA spd limit is bound to the attached device, reset together */ link->sata_spd_limit = link->hw_sata_spd_limit; link->sata_spd = 0; @@ -5259,11 +5322,14 @@ struct ata_port *ata_port_alloc(struct ata_host *host) #ifdef CONFIG_ATA_SFF INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); +#else + INIT_DELAYED_WORK(&ap->port_task, NULL); #endif INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); + init_completion(&ap->park_req_pending); init_timer_deferrable(&ap->fastdrain_timer); ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn; ap->fastdrain_timer.data = (unsigned long)ap; @@ -5294,6 +5360,7 @@ static void ata_host_release(struct device *gendev, void *res) scsi_host_put(ap->scsi_host); kfree(ap->pmp_link); + kfree(ap->slave_link); kfree(ap); host->ports[i] = NULL; } @@ -5414,6 +5481,68 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev, return host; } +/** + * ata_slave_link_init - initialize slave link + * @ap: port to initialize slave link for + * + * Create and initialize slave link for @ap. This enables slave + * link handling on the port. + * + * In libata, a port contains links and a link contains devices. + * There is single host link but if a PMP is attached to it, + * there can be multiple fan-out links. On SATA, there's usually + * a single device connected to a link but PATA and SATA + * controllers emulating TF based interface can have two - master + * and slave. + * + * However, there are a few controllers which don't fit into this + * abstraction too well - SATA controllers which emulate TF + * interface with both master and slave devices but also have + * separate SCR register sets for each device. These controllers + * need separate links for physical link handling + * (e.g. onlineness, link speed) but should be treated like a + * traditional M/S controller for everything else (e.g. command + * issue, softreset). + * + * slave_link is libata's way of handling this class of + * controllers without impacting core layer too much. For + * anything other than physical link handling, the default host + * link is used for both master and slave. For physical link + * handling, separate @ap->slave_link is used. All dirty details + * are implemented inside libata core layer. From LLD's POV, the + * only difference is that prereset, hardreset and postreset are + * called once more for the slave link, so the reset sequence + * looks like the following. + * + * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> + * softreset(M) -> postreset(M) -> postreset(S) + * + * Note that softreset is called only for the master. Softreset + * resets both M/S by definition, so SRST on master should handle + * both (the standard method will work just fine). + * + * LOCKING: + * Should be called before host is registered. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_slave_link_init(struct ata_port *ap) +{ + struct ata_link *link; + + WARN_ON(ap->slave_link); + WARN_ON(ap->flags & ATA_FLAG_PMP); + + link = kzalloc(sizeof(*link), GFP_KERNEL); + if (!link) + return -ENOMEM; + + ata_link_init(ap, link, 1); + ap->slave_link = link; + return 0; +} + static void ata_host_stop(struct device *gendev, void *res) { struct ata_host *host = dev_get_drvdata(gendev); @@ -5640,6 +5769,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* init sata_spd_limit to the current value */ sata_link_init_spd(&ap->link); + if (ap->slave_link) + sata_link_init_spd(ap->slave_link); /* print per-port info to dmesg */ xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, @@ -6260,10 +6391,12 @@ EXPORT_SYMBOL_GPL(ata_base_port_ops); EXPORT_SYMBOL_GPL(sata_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_ops); EXPORT_SYMBOL_GPL(ata_dummy_port_info); +EXPORT_SYMBOL_GPL(__ata_port_next_link); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_host_init); EXPORT_SYMBOL_GPL(ata_host_alloc); EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo); +EXPORT_SYMBOL_GPL(ata_slave_link_init); EXPORT_SYMBOL_GPL(ata_host_start); EXPORT_SYMBOL_GPL(ata_host_register); EXPORT_SYMBOL_GPL(ata_host_activate);