X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_cs5535.c;h=f1b6556f0483ac1106b7fd31a53644dd02955da4;hb=be8f78b8e8b5bcafc19ac85b815e98049aa86314;hp=08cccc9c659b9cebbbe7ff13fe2c1a1cdd292d2c;hpb=152a6a9da1bd3ed5dcbbf6ff17c7ebde0eb9a754;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 08cccc9c659..f1b6556f048 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -25,7 +25,7 @@
  * Documentation:
  *	Available from AMD web site.
  * TODO
- *	Review errata to see if serializing is neccessary
+ *	Review errata to see if serializing is necessary
  */
 
 #include <linux/kernel.h>
@@ -39,7 +39,7 @@
 #include <asm/msr.h>
 
 #define DRV_NAME	"cs5535"
-#define DRV_VERSION	"0.2.11"
+#define DRV_VERSION	"0.2.12"
 
 /*
  *	The Geode (Aka Athlon GX now) uses an internal MSR based
@@ -72,6 +72,7 @@
 /**
  *	cs5535_cable_detect	-	detect cable type
  *	@ap: Port to detect on
+ *	@deadline: deadline jiffies for the operation
  *
  *	Perform cable detection for ATA66 capable cable. Return a libata
  *	cable type.
@@ -157,61 +158,14 @@ static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5535_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cs5535_port_ops = {
-	.port_disable	= ata_port_disable,
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= cs5535_cable_detect,
 	.set_piomode	= cs5535_set_piomode,
 	.set_dmamode	= cs5535_set_dmamode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= cs5535_cable_detect,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
-
-	.port_start	= ata_port_start,
 };
 
 /**
@@ -226,15 +180,14 @@ static struct ata_port_operations cs5535_port_ops = {
 
 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	static struct ata_port_info info = {
-		.sht = &cs5535_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+	static const struct ata_port_info info = {
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x1f,
+		.udma_mask = ATA_UDMA4,
 		.port_ops = &cs5535_port_ops
 	};
-	struct ata_port_info *ports[1] = { &info };
+	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 
 	u32 timings, dummy;
 
@@ -246,7 +199,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
-	return ata_pci_init_one(dev, ports, 1);
+	return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL);
 }
 
 static const struct pci_device_id cs5535[] = {