X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_cs5536.c;h=73f8332cb67992ac70d0bad0ba6166017d997ba1;hb=2476b4d0426e1d6d4a42b2f7ae08f668b2cfe510;hp=1c4ff9b52b5c0b0bc39c27d2eaf73c5da601cda6;hpb=bdc08942897f6be33d00bb659761516f4652836d;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 1c4ff9b52b5..73f8332cb67 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -221,55 +221,14 @@ static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 static struct scsi_host_template cs5536_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations cs5536_port_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= cs5536_cable_detect,
 	.set_piomode		= cs5536_set_piomode,
 	.set_dmamode		= cs5536_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= cs5536_cable_detect,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-
-	.port_start		= ata_port_start,
 };
 
 /**
@@ -282,7 +241,6 @@ static struct ata_port_operations cs5536_port_ops = {
 static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
-		.sht = &cs5536_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -303,7 +261,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	return ata_pci_init_one(dev, ppi);
+	return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
 }
 
 static const struct pci_device_id cs5536[] = {