X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_netcell.c;h=d9719c8b9dbe2540028695af0635f59ae1888331;hb=e49856d82a887ce365637176f9f99ab68076eae8;hp=dbba5b77d79c907e0444a89a1732848cab277891;hpb=cd9bb7e7367c03400d6e918fd3502820fc3b9084;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index dbba5b77d79..d9719c8b9db 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -21,61 +21,12 @@
 /* No PIO or DMA methods needed for this device */
 
 static struct scsi_host_template netcell_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	/* Use standard CHS mapping rules */
-	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations netcell_ops = {
-	.port_disable		= ata_port_disable,
-
-	/* Task file is PCI ATA format, use helpers */
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+static struct ata_port_operations netcell_ops = {
+	.inherits	= &ata_bmdma_port_ops,
 	.cable_detect		= ata_cable_80wire,
-
-	/* BMDMA handling is PCI ATA format, use helpers */
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	/* IRQ-related hooks */
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
-
-	/* Generic PATA PCI ATA helpers */
-	.port_start		= ata_port_start,
 };
 
 
@@ -96,27 +47,31 @@ static const struct ata_port_operations netcell_ops = {
 static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	static struct ata_port_info info = {
-		.sht		= &netcell_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	static const struct ata_port_info info = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		/* Actually we don't really care about these as the
 		   firmware deals with it */
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask 	= 0x3f, /* UDMA 133 */
+		.udma_mask 	= ATA_UDMA5, /* UDMA 133 */
 		.port_ops	= &netcell_ops,
 	};
-	static struct ata_port_info *port_info[2] = { &info, &info };
+	const struct ata_port_info *port_info[] = { &info, NULL };
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
 	/* Any chip specific setup/optimisation/messages here */
-	ata_pci_clear_simplex(pdev);
+	ata_pci_bmdma_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_init_one(pdev, port_info, 2);
+	return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {