X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_opti.c;h=8f79447b6151a006629ce1b0aea6a94d7f030b4d;hb=b63b133165b876838e8685350ef469620f4abd99;hp=da1aa148b37d9f69b5d91c88b57608f1e7d65461;hpb=60f29b1e1600d89aee5e529acb4b276a6650cb8b;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index da1aa148b37..8f79447b615 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.9"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -46,13 +46,15 @@ enum {
 
 /**
  *	opti_pre_reset		-	probe begin
- *	@ap: ATA port
+ *	@link: ATA link
+ *	@deadline: deadline jiffies for the operation
  *
  *	Set up cable type and use generic probe init
  */
 
-static int opti_pre_reset(struct ata_port *ap)
+static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	static const struct pci_bits opti_enable_bits[] = {
 		{ 0x45, 1, 0x80, 0x00 },
@@ -62,8 +64,7 @@ static int opti_pre_reset(struct ata_port *ap)
 	if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
+	return ata_std_prereset(link, deadline);
 }
 
 /**
@@ -179,12 +180,9 @@ static struct scsi_host_template opti_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations opti_port_ops = {
-	.port_disable	= ata_port_disable,
 	.set_piomode	= opti_set_piomode,
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
@@ -196,6 +194,7 @@ static struct ata_port_operations opti_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= opti_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -210,26 +209,25 @@ static struct ata_port_operations opti_port_ops = {
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	static struct ata_port_info info = {
+	static const struct ata_port_info info = {
 		.sht = &opti_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &opti_port_ops
 	};
-	static struct ata_port_info *port_info[2] = { &info, &info };
+	const struct ata_port_info *ppi[] = { &info, NULL };
 	static int printed_version;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(dev, port_info, 2);
+	return ata_pci_init_one(dev, ppi);
 }
 
 static const struct pci_device_id opti[] = {
@@ -244,8 +242,10 @@ static struct pci_driver opti_pci_driver = {
 	.id_table	= opti,
 	.probe 		= opti_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend	= ata_pci_device_suspend,
 	.resume		= ata_pci_device_resume,
+#endif
 };
 
 static int __init opti_init(void)