X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_radisys.c;h=1c0d9fa7ee54687d32d05512a6b09ec4d3c2f1ac;hb=b726e923ea4d216027e466aa602d914e4b4a63af;hp=7d1aabed422db6bd11c45c6f951171bed7a2c564;hpb=e030dbf91a87da7e8be3be3ca781558695bea683;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 7d1aabed422..1c0d9fa7ee5 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -156,17 +156,17 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	radisys_qc_issue_prot	-	command issue
+ *	radisys_qc_issue	-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings if
- *	neccessary. Our logic also clears TIME0/TIME1 for the other device so
+ *	necessary. Our logic also clears TIME0/TIME1 for the other device so
  *	that, even if we get this wrong, cycles to the other device will
  *	be made PIO0.
  */
 
-static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ata_device *adev = qc->dev;
@@ -180,60 +180,20 @@ static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
 				radisys_set_piomode(ap, adev);
 		}
 	}
-	return ata_qc_issue_prot(qc);
+	return ata_sff_qc_issue(qc);
 }
 
 
 static struct scsi_host_template radisys_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_BMDMA_SHT(DRV_NAME),
 };
 
-static const struct ata_port_operations radisys_pata_ops = {
-	.port_disable		= ata_port_disable,
+static struct ata_port_operations radisys_pata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.qc_issue		= radisys_qc_issue,
+	.cable_detect		= ata_cable_unknown,
 	.set_piomode		= radisys_set_piomode,
 	.set_dmamode		= radisys_set_dmamode,
-	.mode_filter		= ata_pci_default_filter,
-
-	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
-
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.cable_detect		= ata_cable_unknown,
-
-	.bmdma_setup		= ata_bmdma_setup,
-	.bmdma_start		= ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= radisys_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-
-	.irq_handler		= ata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
-
-	.port_start		= ata_port_start,
 };
 
 
@@ -256,7 +216,6 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht		= &radisys_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
@@ -269,7 +228,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_init_one(pdev, ppi);
+	return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {