X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fpata_rz1000.c;h=7dfd1f3f6f3a21b31e738c4254a2aa5413890610;hb=c6f31932d0a1d2b13952f506ebc92675e2d8df80;hp=7632fcb070ca8b1a85562fb0aee9ed2e1bdbfc35;hpb=1d2808fd3d2d5d2c0483796a0f443d1cb3f11367;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 7632fcb070c..7dfd1f3f6f3 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -26,7 +26,7 @@
 
 /**
  *	rz1000_set_mode		-	mode setting function
- *	@ap: ATA interface
+ *	@link: ATA link
  *	@unused: returned device on set_mode failure
  *
  *	Use a non standard set_mode function. We don't want to be tuned. We
@@ -34,12 +34,11 @@
  *	whacked out.
  */
 
-static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
 {
-	int i;
+	struct ata_device *dev;
 
-	for (i = 0; i < ATA_MAX_DEVICES; i++) {
-		struct ata_device *dev = &ap->device[i];
+	ata_link_for_each_dev(dev, link) {
 		if (ata_dev_enabled(dev)) {
 			/* We don't really care */
 			dev->pio_mode = XFER_PIO_0;
@@ -54,55 +53,13 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
 
 
 static struct scsi_host_template rz1000_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	ATA_PIO_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations rz1000_port_ops = {
-	.set_mode	= rz1000_set_mode,
-
-	.port_disable	= ata_port_disable,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.bmdma_setup 	= ata_bmdma_setup,
-	.bmdma_start 	= ata_bmdma_start,
-	.bmdma_stop	= ata_bmdma_stop,
-	.bmdma_status 	= ata_bmdma_status,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-
-	.data_xfer	= ata_data_xfer,
-
-	.freeze		= ata_bmdma_freeze,
-	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ata_bmdma_error_handler,
-	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.inherits	= &ata_sff_port_ops,
 	.cable_detect	= ata_cable_40wire,
-
-	.irq_handler	= ata_interrupt,
-	.irq_clear	= ata_bmdma_irq_clear,
-	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
-
-	.port_start	= ata_port_start,
+	.set_mode	= rz1000_set_mode,
 };
 
 static int rz1000_fifo_disable(struct pci_dev *pdev)
@@ -132,7 +89,6 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 {
 	static int printed_version;
 	static const struct ata_port_info info = {
-		.sht = &rz1000_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &rz1000_port_ops
@@ -143,7 +99,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
 
 	if (rz1000_fifo_disable(pdev) == 0)
-		return ata_pci_init_one(pdev, ppi);
+		return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
 
 	printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
 	/* Not safe to use so skip */