X-Git-Url: http://pilppa.org/gitweb/gitweb.cgi?a=blobdiff_plain;f=drivers%2Fata%2Fsata_svw.c;h=16aa6839aa5a68e435060d7035fbb129c18dc951;hb=16e605a2a0398bc1e693e8571bf0cbc5aa5c00c8;hp=840d1c4a7850e831651f897758a8005516799515;hpb=d7fe321eeba58f0a37cc4324d10e52092be457e0;p=linux-2.6-omap-h63xx.git

diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 840d1c4a785..16aa6839aa5 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -233,7 +233,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
 
 	/* issue r/w command if this is not a ATA DMA command*/
 	if (qc->tf.protocol != ATA_PROT_DMA)
-		ap->ops->exec_command(ap, &qc->tf);
+		ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 /**
@@ -269,7 +269,7 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
 	   and the start command. */
 	/* issue r/w command if the access is to ATA*/
 	if (qc->tf.protocol == ATA_PROT_DMA)
-		ap->ops->exec_command(ap, &qc->tf);
+		ap->ops->sff_exec_command(ap, &qc->tf);
 }
 
 
@@ -327,50 +327,23 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
 
 
 static struct scsi_host_template k2_sata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
+	ATA_BMDMA_SHT(DRV_NAME),
 #ifdef CONFIG_PPC_OF
 	.proc_info		= k2_sata_proc_info,
 #endif
-	.bios_param		= ata_std_bios_param,
 };
 
 
-static const struct ata_port_operations k2_sata_ops = {
-	.tf_load		= k2_sata_tf_load,
-	.tf_read		= k2_sata_tf_read,
-	.check_status		= k2_stat_check_status,
-	.exec_command		= ata_exec_command,
-	.dev_select		= ata_std_dev_select,
+static struct ata_port_operations k2_sata_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.sff_tf_load		= k2_sata_tf_load,
+	.sff_tf_read		= k2_sata_tf_read,
+	.sff_check_status	= k2_stat_check_status,
 	.check_atapi_dma	= k2_sata_check_atapi_dma,
 	.bmdma_setup		= k2_bmdma_setup_mmio,
 	.bmdma_start		= k2_bmdma_start_mmio,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_data_xfer,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.irq_on			= ata_irq_on,
 	.scr_read		= k2_sata_scr_read,
 	.scr_write		= k2_sata_scr_write,
-	.port_start		= ata_port_start,
 };
 
 static const struct ata_port_info k2_port_info[] = {
@@ -519,8 +492,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
-				 &k2_sata_sht);
+	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				 IRQF_SHARED, &k2_sata_sht);
 }
 
 /* 0x240 is device ID for Apple K2 device
@@ -531,8 +504,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
  * */
 static const struct pci_device_id k2_sata_pci_tbl[] = {
 	{ PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 },
-	{ PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 },
-	{ PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 },
+	{ PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 },
+	{ PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 },
 	{ PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 },
 	{ PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 },
 	{ PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 },